Power Systems
-
Servo Extension Lead 42cm (5pcs/bag)$3.23Strong, well crimped and finished.
Learn More
High quality wire and terminals used. -
RC Controller Stick Ends. (JR)$5.99RC Controller Stick Ends. (JR) Add some bling style to your transmitter stick!Learn More -
CNC Rudder 2 Tray 4.0 inch (#4-40) Black$19.99CNC Rudder 2 Tray 4.0 inch (#4-40) Black
Shoring : 2 Bearing Insert
Servo: HITEC, FUTABA, JR
Weight: 85gCOLOR
Shoring, Arm: Titanium Silver
Tray: The resulting black anodized finish rework is a classy two-tone imageThis is a CNC machined Rudder 2_Tray that features a 4.0" Servo Arm with multiple 4-40 bolt output mounting holes.
This tray features dual ball bearings for ultra-smooth and precise movement.
Learn More -
Turnigy 9X 2.4GHz 8Ch Receiver (V2)$12.86Turnigy 9X 2.4GHz 8ch (V2) receiver that is suitable for use with the Turnigy 9X transmitter (V2). Get that locked-in feeling that only the 2.4Ghz glitch-free technology can provide. Ultra-fast reaction times and interference-free control of your model that is only achievable with this latest 2.4Ghz technology.
Learn More -
AX 1806N 2100kv Brushless Micro Motor (19g)$8.48AX-1806N-2100
Learn More
Micro brushless motor
Factory Spec.
Kv: 2100rpm/v
Lipo Range: 2-3 cell
Suggested prop: 5x3 ~ 6x3
Best current range: 3~7A
Weight: 19g
Shaft: 3mm
Stator: 18 x 6mm
Test Data.
Battery: 11.5v
Current: 7.2A
Propeller: 5x3
Thrust: 337g
Speed: 18570rpm -
Blue Bird BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.3g$16.82BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.4gContinuing the Blue Bird tradition of affordable performance. By using carbon+30% POM gears and optimizing the curvature of the gears, the gears are able to withstand over 3.5kg of force. With a tolerance of less than 0.3 degree per PWM step, this servo is perfect for CCPM helicopter control, precision aerobatic aircraft, and 1/18 scale cars.
The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over high temperature without degradation.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. Follow the wiring diagram below. 1. Carbon+30% POM gear with smooth curvature
2. M9.6 ball bearing (si-oil)
3. High-torque motor with low RF noise (CE certified)
4. Rubber seals for waterproof case
5. Designed to be used in R/C helicopter applications.
6. Futaba compatible 25 tooth output splines
7. Metal gears of aluminum 6061 material combined with light and strong C95 material
8. 2PEW coated motor wire for high-temperature us
Learn More
Weight: 11.4 grams / 0.44oz
Dimensions: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch
Torque At 4.8V: 1.6kg/cm , 22 oz/in
Torque At 6.0V: 2.3kg/cm , 28 oz/in
Speed At 4.8V: 0.13sec / 60 deg at no load
Speed At 6.0V: 0.11sec / 60 deg at no load -
Corona DS-929MG Digital Servo 2.2kg / 0.11sec / 12.5g$8.97Corona DS-929MG is a fantastic small powerful servo. Extremely popular with good speed and metal gear. A cost effective digital servo for small RC planes, cars and boats or updating plastic gear servos with metal gear ones. Precise control and minimal dead-band width, they are an excellent choice and recommended by our own electrical engineer, Nick.
Learn More -
Corona 2.4Ghz 8ch Receiver (V2 DSSS)$20.56Corona 8 Channel 2.4Ghz DSSS Receiver.
Can only be used with Version II Futaba & JR Corona modules.
Spec.Size : 46mm*25mm*16mmLearn More
Voltage : 4.8 V - 6V
range : more than 2100m
Operating current : 30 MA
Sensitivity : -100dbm
Latency : 22ms
-
Turnigy D2836/8 1100KV Brushless Outrunner Motor$17.35Learn MoreTurnigy D2836/8 1100KV Brushless Outrunner Motor
Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 18A
No load current: 1A
Max power: 336W
Internal resistance: 0.107 ohm
Weight: 70g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/11x7 14.85V/7x3
Max thrust: 1130g -
Turnigy D2830-11 1000kv Brushless Motor$14.50Learn MoreD2830-11 1000kv Brushless MotorSpecs:Rpm/V: 1000kvShaft: 3.17mm
Voltage: 2S~4S (7.4v to 14.8v)Weight: 52gWatts: 210w
Max Current: 21A
ESC: 30A
Suggested Prop: 8x4 (4S) ~ 10x7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mmNOTE: This motor is 1000kv. The factory labelled them 1100kv in error. -
Corona DS-919MG Digital Metal Gear Servo 1.7kg / 0.06sec / 12g$9.09Corona 919MG Metal Gear Servo 1.7kg/ 0.06sec / 12.5g
Learn More -
Corona DS-939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5g$9.58Corona 939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5gModel: DS939MGLearn More
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 240mA
Operating Speed: 0.14sec.60º/ 0.13sec.60º
Stall Torque: 2.5kg.cm / 2.7kg.cm
Size: 22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight: 12.5g
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR85
Gear: Metal
Connector wire: 215mm
Operating Temperature Range: -20J+60J -
-
HobbyKing 20A (2~4S) ESC 3A UBEC$11.99Specs:
Learn More
Constant Current: 20A
Burst Current: 25A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 30g
Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
Note: User manual can be downloaded from the files Tab. -
HobbyKing 30A (2~4S) ESC 3A UBEC$13.99Specs:
Constant Current: 30A
Burst Current: 40A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 32gProgramming Functions:
Learn More
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
Note: User manual can be downloaded from the files Tab. -
HobbyKing 60A (2~4S) ESC 4A SBEC$28.99Specs:
Constant Current: 60A
Burst Current: 80A
Battery: 2-4S Lipoly / 5-12s NiXX
SBEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Size: 70 x 32 x 17mm
Battery Wire: 14AWG
Motor Wire: 14AWG
Weight: 61gProgramming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)Note: User manual can be downloaded from the files Tab.
Learn More -
TURNIGY Heat Sink with Fan for 36 series motors.$5.41TURNIGY Heat Sink with Fan for 36 series motors. Or motors with a diameter of 36mmSpec.Inner diameter: 35.55mmDimentions: 51 x 55 x 63mm (whole unit)Weight: 75g
Learn More
-
Replacement Pinion Gear 1.5mm - 9T / 0.4M$2.05Replacement Pinion Gear 1.5mm - 9T / 0.4MLearn More -
-
-
Power HD 1900A Servo 20T 1.7kg / 0.08sec / 9.9g$4.62Micro analog servo.
Learn More
Precise, jitter free response for small parkflyers or light 3D. -
HobbyKing® ™ Brushless Car ESC 30A w/ Reverse$17.88A standard car esc. providing forward and reverse with a large range of motor compatability for up to 240,000RPM motors.
Features:
Learn More
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
Specification:
Input voltage: 2-3S Lithium batteries / 4~9 Ni-xx
Cont. Current: 30A
BEC output: 2A /5V (Linear)
Size( length X width X high): 45x32x20mm
Weight: 51g
-
HobbyKing® ™ Brushless Car ESC 45A w/ Reverse$25.25Standard 45A car esc with forward reverse and a good range of features such as timing adjust and breaking. Supports a wide range of motors. Very reliable!Learn More -
Electric Retract with Reversible Mount (1pc) 18.8g$9.01The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!
Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mmMount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mmNot suitable for a plane heavier than 2kg
Learn More
Strut & Landing gear not included -
HK-5320 Ultra-Micro Digital Servo 0.075kg / 0.05sec / 1.7g$4.00HK-5320 Ultra-Micro Digital Servo
Spec.
Weight: 1.7g
Speed: 0.07sec 60deg @ 2.8v / 0.05sec 60deg @4.2v
Torque: 0.05kg @ 2.8v / 0.075kg @ 4.2v
Dead Band: <4usPlug: Micro JST - 1.25 PitchLearn More
![]("http:/www.mks-servo.com.tw/images/speed-reaction.jpg"){kind=link}
Login and Registration Form