Power Systems

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (8S):
18x8: 1401W, 50A, 5757g static thrust
19x8: 1643W, 59A, 6519g static thrust
20x8: 1900, 69A, 7291g static thrust

Performance Data (10S):
15x8: 1445W, 41A, 5501g static thrust
17x8: 2111W, 61A, 7450g static thrust
16x12: 2375W, 69A, 9040g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (10S):
18x8: 1630W, 46A, 6330g static thrust
19x8: 1923W, 54A, 7231g static thrust
20x8: 2240W, 64A, 8162g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (10S):
16x10: 1911W, 54A, 7282g static thrust
17x10: 2291W, 65A, 8435g static thrust
18x8: 2300W, 66A, 8003g static thrust

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (12S):
21x12: 2332W, 55A, 9833g static thrust
21x13.5: 2545W, 60A, 10810g static thrust
22x12: 2675W, 64A, 10891g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (10S):
20x8: 1771W, 49A, 7082g static thrust
20x10: 2085W, 59A, 8504g static thrust
22x10: 2707W, 80A, 10395g static thrust

Performance Data (12S):
17x10: 2061, 48A, 7995g static thrust
18x10: 2444W, 58A, 9145g static thrust
19x10: 2850W, 68A, 10319g static thrust

Turnigy Aerodrive SK3 - 35-XX Spare Accessory Pack

Turnigy Aerodrive SK3 - 63-XX Spare Accessory Pack

Turnigy Aerodrive SK3 6374 Series Replacement Shaft Set

Spec.
Shaft length: 113mm
Shaft diameter: 8mm

Turnigy Aerodrive SK3 5045/5055 Series Replacement Ball Bearing Set (3pcs/bag)

Spec.
1x 13mm x 6mm x 5mm
2x 10mm x 6mm x 3mm

26mm Diameter Motor Mount - Clamp Style for Inrunner Motor

Spec.
Diameter: 26mm (Fits 380 Size Inrunner)
Length: 48.5mm
Weight: 14g

A high thrust and well designed Electric Ducted Fan unit for high power applications, the 10 blade arrangement makes for a quiet fan unit with an amazing sound, this is the closest you will ever get to the sound of a Turbine!

Made with 30% FRP and dynamically balanced, for use with high performance 28mm EDF motors, either 3.17m or 4mm shaft. For the best results from this fan, we reccomend the Turnigy 2855 EDF motors.

Specs:
Outside Diameter: 72mm
Rotor Diameter: 68mm  blade
Meterial: carbon fiber reinforced Nylon rotor 
Shaft adaptor to motor: 3.17mm or 4mm
Max RPM: 45000 RPM

Combined with a 10x6 E-prop this motor can push out over 1000g in thrust on a 3S1P configuration lipo.
Good for bigger foamies or parkflyers where about 150W is required.

Spec.
Kv: 1050rpm/v
Operating Current: 6A ~ 16A
Peak Current: 19A
Weight: 56g
Dimensions: 27.6 x 32mm
Shaft Size: 3.175mm

Kit includes full accessories, including gold bullet connectors, prop saver, mount, spare rubber rings, shrink tube and screws.

Performance Data   
Voltage   Current   Prop    Thrust
11.1V      8.6A      8040    538g
11.1V      13.7A    9050    810g
11.1V      16.7A    1060    650g

Turnigy Aerodrive SK3 3536 Series Replacement Shaft Set

Spec.
Shaft length: 58mm
Shaft diameter: 5mm

Turnigy Aerodrive SK3 6354 Series Replacement Ball Bearing Set (3pcs/bag)

Spec.
1x 19mm x 8mm x 6mm
2x 12mm x 8mm x 3.5mm

Propeller adapter for BE1806 motor 2 x CW

Turnigy Air Brushless Motor 3730-1000kv
 
Specifications:
Dimension: 37mm x 30mm
Weight: 112g Inc 4mm Gold Connector (130g inc all fittings)
Kv: 1000rpm/V
Voltage: 11.1v~14.8v (3s~4s)
Max Power: 580w
Max Current: 42A
No load Current: 1.6A
Diameter of shaft: 4mm
Thrust: 1700g
ESC: 60A

Specs.
RPM/V: 1350Kv
Cell Count: 2s~3s Lipoly  
Max.current: 10A
Max Watts: 120w 
No Load Current: 0.3A/7.4V 
Dimensions: Φ28mm×16mm
Shaft: 3mm
Weight: 26g
Max Thrust: 245g

A powerful, lightweight micro brushless motor that is ideal for those small indoor or even parkfly type models. Nicely machined and balanced, hand wound with thick gauge copper, supplied with X mount, mounting screws, 2mm connectors and prop driver.

Specs:
Model: LD1510A-02-P
Kv: 2200rpm/v
Weight: 16.5g (with wires and mount)
Voltage: 7.4~11.1V
No Load Current: 0.2A
Max Current: 6A
Max Power: 60 watts
Shaft Diameter: 2mm
Motor Diameter: 18mm
Mount Bolt Hole Centers: 25mm
Mounting Bolt Size: 2mm
Connector: 2mm
Suggested ESC: 10A

LDPOWER MT2206-1900KV Brushless Multicopter Motor (CW)

Innovators in multicopter technology, LDPOWER, have released their long awaited series of premium multicopter motors. These have been stringently tested to ensure outstanding performance, reliability and durability.

These motors are easy to install, very efficient and have no noise. They come in both CW and CCW formats.

LDPOWER motors are premium quality and will definitely answer the need of serious builders and flyers of quads/multis everywhere.

Specs:
KV(RPM/V): 1900KV
LiPoly cells: 7.4V-11.1V (2S-3S)
Max Power: 323.8W
Max Amps: 25.7A
Dimensions(Dia.xL): 29.5 x 27.7mm
Motor Shaft: 3mm
Prop shaft: 5mm
Weight: 34.7g
Bolt hole spacing: 19mm-M3*2  16mm-M3*2
Connectors: 2mm bullet

Volts  Prop   Throttle  Amps  Watts     RPM     Thrust (g)
7.4    6030   30%     1.8      13.32      8792      85
7.4    6030   50%     2.7      19.98    10341     123
7.4    6030   75%     3.9      28.86    11949     171
7.4    6030   100%    5.3      39.22    13656     228
7.4    6045   30%     2.5      18.5        7107     115.5
7.4    6045   50%     3.7      27.38     8607      164.5
7.4    6045   75%     6.0      44.4     10216      240
7.4    6045   100%    9.2     68.08    12003      335
11.1   6030   30%     3.1     34.41    12140      180
11.1   6030   50%     4.6     51.06    15621      249
11.1   6030   75%     6.9     76.59    16420      350
11.1   6030   100%    10.3   114.33   18953      480
11.1   6045   30%     3.8      42.18     9592      210
11.1   6045   50%     5.8      64.38   11258      292.5
11.1   6045   75%     10.1    112.11  13817      430.5
11.1   6045   100%    16.2    179.82  16315      594.5

22mm 280 C-Shape Motor Mount (clamp style)

Spec.
Diameter: 22mm (Fits 280 Size Inrunner)
Length: 31.5mm
Weight: 9g

Turnigy L2210-1650 Bell Style Motor.

Performance Data (2S):
8x3.8: 96W, 14A, 560g static thrust
8x4.7: 113W, 16A, 659g static thrust
9x4.7: 152W, 22A, 820g static thrust

Performance Data (3S):
6x4: 128W, 12A, 619g static thrust
7x4: 199W, 19A, 882g static thrust
7x5: 230W, 22A, 1047g static thrust

Turnigy L5055B-600 Brushless Outrunner 600kv.

Specs:
Dimension: 50mm x 55mm
Weight: 296g (with 4m connectors)
Kv: 600rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1500w
Max Current: 55A
Max Efficiency: 85% @ 35A
No load Current: 2.6A
Internal Resistance: 0.22
Diameter of shaft: 6mm

Performance Data (4S):
13x10: 595W, 43A, 3150g static thrust
14x8.5: 652W, 47A, 3265g static thrust
15x8: 755W, 55A, 3556g static thrust

Performance Data (6S):
11x8: 885W, 43A, 3668g static thrust
12x7: 1030W, 50A, 4084g static thrust
12x8: 1133W, 55A, 4410g static thrust

Performance Data (8S):
10x6: 1135W, 40A, 3751g static thrust
11x5.5: 1420W, 51A, 4384g static thrust
11x6: 1495W, 54A, 4695g static thrust

Upgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor. This motor will provide clean and efficient power for your large-scale aircraft without the mess and hassle of nitro fuel.

When combined with a 10S LiPo battery, a 24x10 to 26x12" propeller, and a 150Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.

Performance Data (10S):
24x10: 2893W, 83A, 11227g static thrust
24x12: 3300W, 95A, 12974g static thrust
26x10: 3632W, 106A, 13315g static thrust
26x12: 4101W, 120A, 15246g static thrust

Performance Data (12S):
22x8: 3031W, 72A, 10488g static thrust
22x10: 3560W, 86A, 12627g static thrust
24x8: 3933W, 95A, 12805g static thrust
26x8: 4915W, 120A, 15150g static thrust

AX-1806N-2100
Micro brushless motor

Factory Spec.
Kv: 2100rpm/v
Lipo Range: 2-3 cell
Suggested prop: 5x3 ~ 6x3
Best current range: 3~7A
Weight: 19g
Shaft: 3mm

Stator: 18 x 6mm

Test Data.
Battery: 11.5v
Current: 7.2A
Propeller: 5x3
Thrust: 337g
Speed: 18570rpm