Micro SU-27 (PNF) w/6 Axis Gyro DSM2 Compatible 300mm (11.8")

With this Micro SU-27, you get a lot of fun in a small package, great for indoor flying or outside on a calm or windy day. The SU-27 is packed full of features such as a DSM2 compatible receiver and ESC, super-sensitive 6 axis gyro with self-leveling function, attitude and voltage sensor, 2 x 2g micro servos, and an 1103 8200Kv brushless motor with propeller. The gyro has 3 mode settings available, self-leveling, stabilized, and off so that you can fly the SU-27 according to your abilities.

It comes out of the box just about completely ready-made (see note below) and ready to bind to a DSM2 compatible transmitter, it is made of tough but lightweight PP foam with a carbon strip reinforcement. It also comes very nicely finished in an eye-catching color scheme and due to the 6 axis gyro, it is suitable for beginners as well as seasoned flyers. All you need apart from a suitable FrSky transmitter is a 7.4V 150~180mAh 25~30C LiPo battery. You will then be required to bind the receiver to the transmitter and go through the gyro set-up procedure, once this is done you will be ready to fly. Despite its small size, it is very stable in the air and once you have gained experience with it you can fly it in a moderate breeze.

Note: It is ready-made but you are required to glue into place the 2 vertical fins and screw the 2 elevons directly to the servo units. These have been left off to avoid them getting damaged in the box when being shipped.

Features:
• Micro size, only 300mm wingspan
• Fully built in the box (see the note above)
• Ready to bind to a DSM2 compatible transmitter
• Includes a 6 axis super sensitive gyro with self-leveling function
• 3 gyro modes available, self-leveling, stabilized, gyro off
• Attitude and voltage sensor
• Made of tough PP foam reinforced with carbon strips

Specs:
Wingspan: 300mm (11.8")
Length: 360mm (14.2")
Flying Weight: 38g (1.34oz)
Motor: 1103 8200kv brushless outrunner
Servos: 2 x 2g
Radio Compatibility: DSM2
Gyro: 6 axis super sensitive with 3 modes
Attitude and Voltage Sensor: Yes
Material: PP foam with carbon reinforcement
Assembly Time: Minimum assembly required (then it's just binding Rx and setting up the gyro as shown in the manual)

Included:
H-King Micro SU-27 (ready assembled, see note)
DSM2 compatible receiver and ESC (installed)
2 x 2g servos (installed)
1103 8200kV brushless outrunner with prop (installed)
6 axis gyro (installed)

Required:
DSM2 compatible transmitter
150~180mAh 25~30C 7.4V LiPo battery

Please note: A copy of the manual is available under the "Files" tab.