Cars

This digital ultra-micro servo is perfect for your indoor flyer or any other micro rc application.

Specs:
Voltage: 2.5~4.8V
Speed: 0.07sec/60°(3.7V),0.06sec/60°(4.2V)
Torque: 0.095kg·cm(3.7V),0.11kg·cm(4.2V)
Dimensions: 16 x 8.2 x 16.5mm
Weight: 2.2g
Motor: Coreless
Gear Train: Plastic
Type: Digital

Nitro Rumble - head button

Nitro Rumble - Engine Crankcase

Front Shock Spring - Skull Crusher

Basher Nitro Circus MT, SaberTooth Truggy - Output Shaft (2pcs)

Basher Nitro Circus MT - F/R steering kunckle arms

Pin for susp.arms - Basher SaberTooth 1/8 Scale (4pcs)

Alu. Front sus. arm bracket - Basher SaberTooth 1/8 Scale (1pc)

Rear dogbone - Basher SaberTooth 1/8 Scale Truggy

Body support - Basher SaberTooth 1/8 Scale Truggy (4pcs)

Rear propeller shaft - Basher SaberTooth 1/8 Scale Truggy

Alu. Rear wing spacer - Basher SaberTooth 1/8 Scale (2pcs)

Rim (2pc) - Basher 1/16 Mini Nitro Circus MT

Titanium Wheel Bar Holder - Basher 1/16 Mini Nitro Circus MT

Ball Joint Housing 3 - A3011

Front & Rear Central Joint Shaft - Basher SaberTooth 1/8 Scale Truggy Nitro

Upgrade Spur Gear 97T 48P for BSR Racing BZ-222 Racing Buggy

Upgrade Spur Gear 87T 48P for BSR Racing BZ-222 Racing Buggy

Servo Saver Mount, Servo Saver Tie Rod (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35023

Covers for Body (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35033

This 45A brushed ESC is a great replacement for your model's stock ESC or for setting up a new brushed power system in your car or truck. It features a low voltage cut-off for use with lipoly batteries. Its compact and lightweight design make it ideal for use in 1/10 scale drift cars utilizing brushed motors.

Features:
• Low voltage cutoff for use with Lipoly batteries
• Compact and lightweight design
• 5.6V/2A BEC

Specs:
Continuous Current: 45A
Burst Current: 320A (10sec)
Suitable Car: 1/10 on and off road
Battery: 2 cell Lipo (5-6 cells NI-xx)
BEC output: 5.6V/2A switch mode built-in
Motor type: brushed
Operation: Forward/Brake/Reverse
Dimension: 38x28x22mm
Weight: 40g

HobbyKing is now proud to offer the famous Bittydesign approved 1/10 190mm Racing Body Shell and Body accessories!

The Striker-SR 3.0 version body has been developed for many months with several tests with the result of real fast bodyshell that combines a steering efficiency togheter with highest rear stability. It comes with big efra spec downforce rear wing that provide the best balance from front/rear axle of your car.

The bodyshell is EFRA, IFMAR, ROAR and BRCA approved.

The body is particular indicated for surfaces with a high level of grip, the use of our "Ultra Charge" Hard wing is suggested.

Features:
• The body comes with a complete set of lightweight big plastic washers to fix the rear wing perfectly. Steel screws nuts are includeds in the kit (you don't need to purchase any aftermarket accessory to fix our wing)

• Lightweight 0.75mm thickness
• EFRA, IFMAR, ROAR and BRCA approved
• Best performances on high grip surfaces
• Made with high quality polycarbonate
• Clear body sold with Protective film
• Windows masks & decals sheet included

*Note: Body shell requires finishing such as painting, cutting out of the wheel wells and applying decals.

The Precision Spur Gear R2 83T is specially designed for 1/10th scale vehicles using hex type slipper pads such as Team Associated off-road vehicles and a great upgrade for your BZ-222. The Revision 2 version of the gears are precision machined from specially formulated composite material to ensure highest strength, low running noise and excellent reliability. 

The increased contact area improves durability without sacrificing efficiency. The precision machining not only increases the durability of the gears but also provides an improved gear mesh.

All gears feature machined vents and weight reducing holes to minimize heat build-up when running a soft slipper clutch setting. The gears are engraved with size markings for easy identification.

Features:
• Machined composite material for increased strength, low noise and improved reliability
• Increased contact area
• Machined vents and weight reducing holes to minimize heat build-up
• Engraved markings for easy identification

Specs:
Size: 48DPX 83T
Material: Composite
Weight: 5.7g

Screw Grub Hex M5x5mm (10pcs/pack)

Diff.Gear Housing (2pcs) - 118B, A2006, A2023T and A2035

Pins for Front Upright 2 pcs - 118B, A2006, A2023T and A2035

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Red is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Length: 1m
Colour: Translucent Red

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Black is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Lenght: 1m
Colour: Translucent Black

Turnigy 1/2" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

Turnigy 3/8" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

Replacement 2.5mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head.