Vehicles

Upgrade Spur Gear 87T 48P for BSR Racing BZ-222 Racing Buggy

Servo Saver Mount, Servo Saver Tie Rod (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35023

Covers for Body (2pcs) - Basher RockSta 1/24 4WS Mini Rock Crawler

Part Number: 35033

Specs:
Constant Current: 30A
Burst Current: 40A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 2A
Motor Type: Sensorless Brushless
Cooling: Watercooled
Size: 70 x 27 x 17mm
Weight: 53g

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

HobbyKing Boat ESC Programming Card

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

Specs:
Constant Current: 90A
Burst Current: 120A
Battery: 2-6S Lipoly
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Cooling: Watercooled
Size: 87 x 38 x 22mm
Weight: 105g

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

This 45A brushed ESC is a great replacement for your model's stock ESC or for setting up a new brushed power system in your car or truck. It features a low voltage cut-off for use with lipoly batteries. Its compact and lightweight design make it ideal for use in 1/10 scale drift cars utilizing brushed motors.

Features:
• Low voltage cutoff for use with Lipoly batteries
• Compact and lightweight design
• 5.6V/2A BEC

Specs:
Continuous Current: 45A
Burst Current: 320A (10sec)
Suitable Car: 1/10 on and off road
Battery: 2 cell Lipo (5-6 cells NI-xx)
BEC output: 5.6V/2A switch mode built-in
Motor type: brushed
Operation: Forward/Brake/Reverse
Dimension: 38x28x22mm
Weight: 40g

Specs:
Constant Current: 50A
Burst Current: 70A
Battery: 2-6S Lipoly
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Cooling: Watercooled
Size: 87 x 38 x 22mm
Weight: 105g

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

HobbyKing is now proud to offer the famous Bittydesign approved 1/10 190mm Racing Body Shell and Body accessories!

The Striker-SR 3.0 version body has been developed for many months with several tests with the result of real fast bodyshell that combines a steering efficiency togheter with highest rear stability. It comes with big efra spec downforce rear wing that provide the best balance from front/rear axle of your car.

The bodyshell is EFRA, IFMAR, ROAR and BRCA approved.

The body is particular indicated for surfaces with a high level of grip, the use of our "Ultra Charge" Hard wing is suggested.

Features:
• The body comes with a complete set of lightweight big plastic washers to fix the rear wing perfectly. Steel screws nuts are includeds in the kit (you don't need to purchase any aftermarket accessory to fix our wing)

• Lightweight 0.75mm thickness
• EFRA, IFMAR, ROAR and BRCA approved
• Best performances on high grip surfaces
• Made with high quality polycarbonate
• Clear body sold with Protective film
• Windows masks & decals sheet included

*Note: Body shell requires finishing such as painting, cutting out of the wheel wells and applying decals.

The FT009 is a High Speed, V-hull racing boat that is fast, fun and easy to use. Its stylish design is nice to look at and it really performs for a boat of this size. If you capsize the FT009 during high speed cornering no problems! It has an inbuilt self-righting function, just apply the throttle and it flips up the right way. All out full speed power runs and sharp banking turns on your favourite waterway are a blast, the FT009 is a ton of fun packed into 460mm of high speed boat.

Being completely ready to run, it is great for both beginners and experienced boaters alike and would make an ideal One Design race boat for novices wanting to get into RC electric boat racing. It’s powered by a 7.4, 1500mAh V Li-ion battery which really packs a punch and comes with a 2.4GHz transmitter offering interference free running at any boating site. The motor, ESC and steering servo are all pre-installed.

A great little boat at a great price.

Features:
• Completely "Ready to Run"
• 7.4V 1500Li-ion battery powered Battery charger
• 2.4GHz transmitter included
• 100 to 150 meters operational distance
• Speed approximately 30 km/h
• Charging time approximately 4 hours
• Run time approximately 5 to 6 minutes
• Sealed receiver compartment
• Sealed main hatch
• Water cooling for motor
• Forwards, backwards, left and right directional control
• Self-righting function

Specs:
Length: 460mm
Motor: 540 brushed racing motor
Battery: 7.4V 1500 MAh Li-ion
Transmitter: 2.4GHz
Color: Orange 

Included:
V-Hull Racing Boat
2.4GHz Transmitter
7.4V Li-ion Battery
110~240VAC Battery Charger (UK style plug)
Spare Propeller
Bow Bumper
Boat stand

Required:
6 x AA batteries for transmitter

Note: Check accessories listing below for mains power adapters.

The FT009 is a High Speed, V-hull racing boat that is fast, fun and easy to use. Its stylish design is nice to look at and it really performs for a boat of this size. If you capsize the FT009 during high speed cornering no problems! It has an inbuilt self-righting function, just apply the throttle and it flips up the right way. All out full speed power runs and sharp banking turns on your favourite waterway are a blast, the FT009 is a ton of fun packed into 460mm of high speed boat.

Being completely ready to run, it is great for both beginners and experienced boaters alike and would make an ideal One Design race boat for novices wanting to get into RC electric boat racing. It’s powered by a 7.4, 1500mAh V Li-ion battery which really packs a punch and comes with a 2.4GHz transmitter offering interference free running at any boating site. The motor, ESC and steering servo are all pre-installed.

A great little boat at a great price.

Features:
• Completely "Ready to Run"
• 7.4V 1500Li-ion battery powered Battery charger
• 2.4GHz transmitter included
• 100 to 150 meters operational distance
• Speed approximately 30 km/h
• Charging time approximately 4 hours 
• Run time approximately 5 to 6 minutes
• Sealed receiver compartment
• Sealed main hatch
• Water cooling for motor
• Forwards, backwards, left and right directional control
• Self-righting function

Specs:
Length: 460mm
Motor: 540 brushed racing motor
Battery: 7.4V 1500 MAh Li-ion
Transmitter: 2.4GHz
Color: Green 

Included:
V-Hull Racing Boat
2.4GHz Transmitter
7.4V Li-ion Battery
110~240VAC Battery Charger 
Spare Propeller
Bow Bumper
Boat stand

Required:
6 x AA batteries for transmitter

Note: Check accessories listing below for mains power adapters. 

The Precision Spur Gear R2 83T is specially designed for 1/10th scale vehicles using hex type slipper pads such as Team Associated off-road vehicles and a great upgrade for your BZ-222. The Revision 2 version of the gears are precision machined from specially formulated composite material to ensure highest strength, low running noise and excellent reliability. 

The increased contact area improves durability without sacrificing efficiency. The precision machining not only increases the durability of the gears but also provides an improved gear mesh.

All gears feature machined vents and weight reducing holes to minimize heat build-up when running a soft slipper clutch setting. The gears are engraved with size markings for easy identification.

Features:
• Machined composite material for increased strength, low noise and improved reliability
• Increased contact area
• Machined vents and weight reducing holes to minimize heat build-up
• Engraved markings for easy identification

Specs:
Size: 48DPX 83T
Material: Composite
Weight: 5.7g

Screw Grub Hex M5x5mm (10pcs/pack)

Diff.Gear Housing (2pcs) - 118B, A2006, A2023T and A2035

Pins for Front Upright 2 pcs - 118B, A2006, A2023T and A2035

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Red is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Length: 1m
Colour: Translucent Red

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Black is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Lenght: 1m
Colour: Translucent Black

Turnigy 1/2" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

Turnigy 3/8" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

H-King Marine Scott Free, Relentless V1 & V2, Aquaholic Racing Boat Replacement Aluminum Rudder Assembly.

H-King Marine Scott Free & Relentless V2 Racing Boat Replacement P1.4 x 37mm 3 Blade Metal Propeller.

H-King Marine Scott Free Racing Boat Replacement Flexi-Shaft Set.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

Replacement 2.5mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 3.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 4.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

ARC R11 1/10 Electric Touring Car - R11 Rear (Long) Shock Tower

Part Number: R118023

ARC R11 1/10 Electric Touring Car - R11 Suspension Block #2

Part Number: R112020

Enhance the scale appearance of your drifter or scale crawler with these clever, hidden magnetic fixings.