Vehicles

Metal Rear Shock Shaft - A3015 (2pcs)

Full Alloy Metal Steering Knuckle Arms L/R - A2038 & A3015 (1pair)

Front C Hub L/R - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Steering Knuckles - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Big Hex Wheel Nuts - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (4pcs)

Basher Nitro Circus MT, SaberTooth Truggy - Wheel Hub

Rear Outdrive - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (2pcs)

Dogbones Cup - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Basher Nitro Circus MT, SaberTooth Truggy - Outdrive Washers

Diff. Box Gasket - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (6pcs)

44T Spur Gear - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Basher Nitro Circus MT, SaberTooth Truggy - Middle Diff. Outdrive

Steering Linkage Plate - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Gearbox Washers (13.2*16*0.2) - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (10pcs)

Pins - Nitro Circus Basher 1/8 Scale Monster Truck (10pcs)

Part no.: BS33516

Servo Linkage - Nitro Circus Basher 1/8 Scale Monster Truck (4pcs)

Part no.: BS33519

Manifold 1set(nickel plating) - A3007

One Way Ball Bearing - Trooper Nitro

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

Diff.Gear Housing (2pcs) - 118B, A2006, A2023T and A2035

Pins for Front Upright 2 pcs - 118B, A2006, A2023T and A2035

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Red is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Length: 1m
Colour: Translucent Red

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Black is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Lenght: 1m
Colour: Translucent Black

Turnigy 1/2" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

Turnigy 3/8" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

A standard car esc. providing forward and reverse with a large range of motor compatability for up to 240,000RPM motors. 

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-3S Lithium batteries / 4~9 Ni-xx
Cont. Current: 30A
BEC output: 2A /5V (Linear)
Size( length X width X high): 45x32x20mm
Weight: 51g
 

Standard 60A car esc with forward reverse and a good range of features such as timing adjust and braking. Supports a wide range of motors. Very reliable!

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-4S Lithium batteries / 4~15 Ni-xx
Cont. Current: 60A
BEC output: 3A/5V (Switch)
Size( length X width X high): 47x41x29mm
Weight: 82g

Hobbyking® X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.

Desert Fox Printed Body Panels Full Set (1 set)

Desert Fox Clear Body Full Set