Vehicles

Front C Hub L/R - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Steering Knuckles - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Big Hex Wheel Nuts - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (4pcs)

Basher Nitro Circus MT, SaberTooth Truggy - Wheel Hub

Rear Outdrive - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (2pcs)

Dogbones Cup - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Basher Nitro Circus MT, SaberTooth Truggy - Outdrive Washers

Diff. Box Gasket - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (6pcs)

44T Spur Gear - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Basher Nitro Circus MT, SaberTooth Truggy - Middle Diff. Outdrive

Steering Linkage Plate - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy

Gearbox Washers (13.2*16*0.2) - Nitro Circus Basher 1/8 Scale Monster Truck, SaberTooth Truggy (10pcs)

Pins - Nitro Circus Basher 1/8 Scale Monster Truck (10pcs)

Part no.: BS33516

Servo Linkage - Nitro Circus Basher 1/8 Scale Monster Truck (4pcs)

Part no.: BS33519

Manifold 1set(nickel plating) - A3007

One Way Ball Bearing - Trooper Nitro

Now officially approved by ROAR  for race use!

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with a LiCo nano-technology substrate complex greatly improving power transfer and making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
 
In short, less voltage sag and a higher discharge rate than a similar-density lithium polymer (non-nano-tech) battery.
 
Unfortunately with other big brands, numbers, ratings, and graphs can be fudged. Rest assured, TURNIGY nano-tech is the real deal, delivering unparalleled performance!
 

Please note: This pack is compatible with the following popular models, you may just require a plug adapter.

Traxxas:
• Rustler 2WD
• Rustler 4x4
• Slash 2WD
• Slash 4WD
• Drag Slash
• Maxx
• E-Revo
• 4-Tec 3.0
• 4-Tec 2.0
• TRX-4
• Hoss

Arrma:
• Granite
• Kraton

Now officially approved by ROAR for race use! 

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with a LiCo nano-technology substrate complex greatly improving power transfer and making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. 

In short, less voltage sag and a higher discharge rate than a similar-density lithium polymer (non-nano-tech) battery. 

Unfortunately with other big brands, numbers, ratings, and graphs can be fudged. Rest assured, TURNIGY nano-tech is the real deal, delivering unparalleled performance!

Please note: This pack is compatible with the following popular models.

Traxxas:
• Rustler 2WD
• Rustler 4x4
• Slash 2WD
• Slash 4WD
• Drag Slash
• Maxx
• E-Revo
• 4-Tec 3.0
• 4-Tec 2.0
• TRX-4
• Hoss

Arrma:
• Granite
• Kraton

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with a LiCo nano-technology substrate complex greatly improving power transfer and making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. 

In short, less voltage sag and a higher discharge rate than a similar-density lithium polymer (non-nano-tech) battery. 

Unfortunately with other big brands, numbers, ratings, and graphs can be fudged. Rest assured, TURNIGY nano-tech is the real deal, delivering unparalleled performance!

Please note: This pack is compatible with the following popular models, you may just require a plug adapter.

Traxxas:
• Rustler 2WD
• Rustler 4x4
• Slash 2WD
• Slash 4WD
• Drag Slash
• Maxx
• E-Revo
• 4-Tec 3.0
• 4-Tec 2.0
• TRX-4
• Hoss

Arrma:
• Mojave

Now officially approved by ROAR and BRCA!

Boasting ultra-high 90C discharge rates and massive pack capacities, the nano-tech Ultimate series of lithium polymer batteries are just the ticket for making it into the winner's circle. Turnigy's industry-leading lithium polymer battery technology has made it possible to finally produce a pack capable of delivering massive amounts of current, dramatically improving performance and pushing your vehicle to its limit without compromise.  

A standard car esc. providing forward and reverse with a large range of motor compatability for up to 240,000RPM motors. 

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-3S Lithium batteries / 4~9 Ni-xx
Cont. Current: 30A
BEC output: 2A /5V (Linear)
Size( length X width X high): 45x32x20mm
Weight: 51g
 

Standard 60A car esc with forward reverse and a good range of features such as timing adjust and braking. Supports a wide range of motors. Very reliable!

Features:
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
 
Specification:
Input voltage: 2-4S Lithium batteries / 4~15 Ni-xx
Cont. Current: 60A
BEC output: 3A/5V (Switch)
Size( length X width X high): 47x41x29mm
Weight: 82g

Hobbyking® X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.

Desert Fox Printed Body Panels Full Set (1 set)

Desert Fox Clear Body Full Set

Desert Fox Dirt Proof Cover (Clear) (1 set)

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 4074
Number of pole: 4
Motor KV: 2000
Max Current: 120A
Max Voltage: 25V / 6S Lipoly
Case Length: 74mm
Case Dia: 40mm
Shaft Dia: 5.0mm
Total Length: 91mm
Weight: 380g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Weight: 275g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-2200KV
Poles: 4
KV: 2200
Max Current: 70A
Max Voltage: 25.2V/6S Lipo
Max Watts: 1750w
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1900KV
Poles: 4
KV: 1900
Max Current: 61A
Max Voltage: 29.4V/7S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g