Batteries / Chargers

A precise balancer, discharger, and cell monitor. The Hobby King Battery Medic is a high-quality device for customers who want precision checking and balancing of their battery packs.
The unit can measure, discharge, and balance Lipoly packs up to 6S.

Spec.
Size: 93.5 x 60 x 17mm
Battery types: Li-polymer (2 ~ 6 cells)
Cell voltage range: 2.0v ~ 3.9v
Discharge: 3.0v ~ 4.2v
Bleed Current: 200~450mA

This is an original unit, calibrated at the factory.

HobbyKing®™ Fire Retardant LiPoly Battery Bag (170x45x50mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag, but superb for encasing your battery when it is installed on your model if the untoward ever happens.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 170mm
Width: 45mm
Height: 50mm
Weight: 52.5g

HobbyKing®™ Fire Retardant LiPoly Battery Bag (Flat) (230x140mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 230mm
Width: 140mm
Height: Flat
Weight: 49.5g

Turnigy® Fire Retardant LiPoly Battery Bag (Zippered) (200x155x95mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire-retardant thread and have a zippered lid.

Protect your family and home from the hazards of LiPo charging. This LP-Guard bag is a fireproof bag designed to stop and contain fires caused by incorrectly or poorly functioning LiPos, especially during charging.

We urge all customers to always practice extreme caution when charging and never leave a charging LiPo battery unattended.

This is a small bag at 18x23cm that can fit three 2200mah 3S1P LiPo packs comfortably.

The LP-Guard is made from a fiberglass woven fabric, that is similar to fireproof suits worn by some firefighters.

LiPoly batteries are a fantastic power source for all of our RC needs, but do need to be treated with respect due to their phenomenal energy density.

The golden rule when charging LiPoly packs is never to leave them unattended, but you can improve on this by using one of these fire retardant charging bags so that, should a mishap occur any conflagration will be contained within the bag and cannot impinge on surrounding surfaces.

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Features:
• Tough, fire retardant construction
• Large size for bigger packs
• Hook and Loop top fastenong
• Easy to store when not in use

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 330mm
Width: 250mm
Weight: 135g

MultiStar Fire Retardant LiPoly Battery Bag (Flat) (210x165mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 210mm
Width: 165mm
Height: Flat
Weight: 55g

Turnigy® Fire Retardant LiPoly Battery Bag (190x68x50mm) (1pc)

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Ideal as a LiPoly charging bag, but superb for encasing your battery when it is installed on your model if the untoward ever happens.

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 190mm
Width: 68mm
Height: 50mm
Weight: 66.5g

Turnigy Programmable Lipo Battery Warmer Bag - Lipo's can lose up to 40% of their capacity when used in cold weather. This of course will drastically shorten flight/drive times and of course performance. This superb Turnigy lipo warmer is perfect for the RC enthusiast who is flying/driving in cold weather/climate and also for competition pilots/drivers looking to squeeze every ounce of capacity from their battery for optimum performance, even in warm ambient temperatures.

You can select the desired temperature via the simple to operate buttons/LED display on the front of the bag, the inbuilt microprocessor offers a 7 step heater range from 25ºC ~ 45ºC (77ºF ~ 113ºF) and the sealable bag, which is lined with a heat reflective material, keeps your lipo snug and ready to use.

Specs:
Input Voltage: 10v ~ 13v DC
Idle Current: <30mAh
Working Current: 2A
Programmable Temp Value: 25/27.5/30/32.5/35/40/45ºC (2 button -/+ operation with LED display)
Operating Temp: -10ºC ~ 45ºC
Dimensions Overall: 295mm x 230mm
Dimensions Lipo Cavity: 195mm x 230mm
Weight: 135g
Connector: XT-60 + Croc Clip Lead (supplied)

We've all done it before, you power up your model with a battery that you were certain was fully charged, but suddenly your model goes into LVC shortly after take-off, forcing you to make an emergency landing. It's very easy to lose track of which battery packs are charged and which aren't when you bring a box full of them to the field.

We now have a solution, the Turnigy Battery Charge Marker! This handy accessory sticks on to your battery pack with double sided tape and stays firmly in place. It features a sliding tab that simply and easily indicates whether or not your battery is charged. When you finish charging your pack, slide the tab to show the Green color (charged), when you take the battery out of your model after use, slide the tab to show the Red color (discharged). It's that simple!

Specs:
Dimensions: 25x12x3mm
Weight: 0.3g

10pcs/bag

HXT-4mm Plug Harness for 2S Hardcase Saddle pack Lipoly Batteries

Discharge Plug: HXT-4mm
Battery Plugs: 4mm Bullet Connetor
Balance Plug: JST-XH

HXT 4mm Connector to T-plug conversion charge lead

This will connect to a Lipo fitted with HXT 4mm connectors and a charge lead fitted with a T-plug

The Hobbyking Cell Checker is a quick and easy way to check your LiPo batteries before and after use. Simply connect the balance plug of your pack to the pins on the cell checker, and it will display the individual cell voltage for up to 6 LiPo cells. It will also at the end of the cycle show the total voltage of the battery pack.

Simple to use Lipoly low voltage alarm that is small and light for on board use. This plugs into the balance lead for detecting low voltage on individual cells.

A loud alarm will sound and the LED will change from Green to Red if any individual cell drops to 3.3v or below.

Spec.
Lipoly Range: 2s~3s
Size: 38x20x10mm
Weight: 5g
Voltage Accuracy: 0.03v
Low Voltage Alarm Threshold: 3.3v (per cell)

Simple to use Lipoly low voltage alarm that is small and light for on board use, plugs into balance lead for detecting low voltage on individual cells. A loud alarm will sound and LED will change from Green to Red if any individual cell drops to 3.3v or below.

Spec.
Lipoly Range: 2s~6s
Size: 38x25x11mm
Weight: 9g
Low Voltage Alarm Threshold: 3.3v (per cell)

Charge at home on 100/240v or in the field on 12v. The B6-AC handles both!
The IMAX B6-AC V2 is a rock solid charger thats able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries.
This is not a fake. It is a genuine IMAX B6. Our fault rate/returns on this charger are extremely low.

The guys at Bat-Safe are RC enthusiasts and came up with a safe and awesome solution to store, transport, and most importantly charge your LiPo batteries.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

The ISDT BG-8S Smart Battery Checker is a new style of multipurpose battery checker. It is specifically designed for hobbyists of Remote Control products. It comes with lots of great features to help check your batteries, and receiver signals and even has a USB output that allows you to charge your phone or other devices. The Battery Checker has a 2.4” 320x240 display that can easily be seen in sunlight and has an easy-to-use menu system to show all functions and data.

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

Use this adapter lead to charge batteries with 4MM Bullet Connector plugs, even those with reversed polarity Connectors using the supplied adaptors.

A Parallel Harness is a common way to double the capacity rating (mAh) while keeping the same voltage.