Batteries / Chargers

Most standard 7S lithium polymer battery packs feature two balance ports, a 4S and 3S balance lead (total 7S). This makes it difficult to charge with most standard battery chargers that only feature one balance port.

With this super useful adapter you can easily charge your 7S battery with any standard 8~10S capable balance charger that accepts JST-XH balance plugs. This adapter takes the 4S and 3S individual plugs from your pack, and combines them to one single 7S balance plug which is able to connect to most standard 8~10S capable chargers.

Specs:
Input: 1 x 4S and 1 x 3S JST-XH balance plug
Output: 7S JST-XH balance plug
Length: 100mm

Most standard 6S lithium polymer battery packs feature two balance ports, 2 * 3S balance lead (total 6S). This makes it difficult to charge with most standard battery chargers that only feature one balance port.

With this super useful adapter you can easily charge your 6S battery with any standard 8~10S capable balance charger that accepts JST-XH balance plugs. This adapter takes the 2 * 3S individual plugs from your pack, and combines them to one single 6S balance plug which is able to connect to most standard 8~10S capable chargers.

Specs:
Input: 2 x 3S JST-XH balance plug
Output: 6S JST-XH balance plug
Length: 100mm

This is an all-in-one balance board adapter that allows you to balance charge 2~6S lipoly batteries with Thunder Power/Flight Power, Hyperion, JST-XH and JST-EH balance plugs. This makes it simple and eliminates the need for carrying separate balance adapters for each type of battery.

Specs;
Cell Count: 2~6S (7.4~22.2V)
Balance Connector Type: TP/HP/XH/EH

*Note: Can only be used to balance one type (TP/HP/XH/EH) at a time. Do not connect more than one type of balance leads to adapter board at same time or damage may occur.

T-Connector Harness for 2 Packs in Parallel (1pc)

Spec:
Weight: 9.0g

XT60 Harness for 2 Packs in Parallel (1pc)

Spec:
Weight: 11.2g

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

JST-XH to JST LED Power Distribution Lead - A neat way to power LED's from 3s Lipoly's using the balance plug.



** WARNING: Check Polarity of your setup before connecting this harness.

This adapter will convert a T-Connector equipped battery to an XT60 for use with an XT60 equipped ESC or an XT60 Charge lead.

This handy connector set will be appreciated by anyone who is dealing with 'Header Pins' on Multirotor boards or any othe type of PCB.

This set consists of a 1 pin housing and 1 female terminal.

Flat style 'AAA' battery holder, holds 4 cells

This binding post set (1 Black, 1 Red) is ideal for building your own charging station or as a 12-24volt power access point for DC power applications.

They are designed to pass through wooden or metal facias up to 10mm thick (they are insulated and required a 7mm mounting hole). 

The output terminals have 4mm holes to suit 4mm male banana plugs, the terminal tips can be removed to allow aligator clamp access, the screw on terminal caps are insulated with a hard plastic shell.

Rated to around 50amps.

Spec:
Total length: 33mm
Depth: 10mm
Mounting hole: 7mm

HXT 4mm to T-Connector Battery Adapter Lead (2pc)

This adapter will convert an HXT 4mm equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 7g (Each)

This adapter will convert a 5.5mm Bullet Connector equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 9g(Each)

This adapter will convert a T-Connector equipped battery to an HXT 4mm for use with an HXT 4mm equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

This adapter will convert an HXT 4mm equipped battery to an XT60 for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 10g(Each)

Finally, a simple solution to mis-matched plug types! This very neat, short one piece adapter is an easy way to convert your T-Connector to XT60. Simply plug your model's T-connector on the ESC into the back of this adapter and you can then use batteries with XT60 plugs in your model, it's that easy!

We have designed these plug adapters in-house and paid for the molding. This allows us to keep costs low and they are exclusive to HobbyKing, meaning you will not find these XT60 plug adapters anywhere else!

The XT60 adapters are made from high-temp nylon and gold plated spring connectors, both are included in the injection molding process at the time when forming the connector.

This set includes:
2 x XT60 Male to T-Connector Adapter Plug

Finally, a simple solution to mis-matched plug types! This very neat, short one piece adapter is an easy way to convert your EC3 plug to XT60. Simply plug your model's EC3 plug on the ESC into the back of this adapter and you can then use batteries with XT60 plugs in your model, it's that easy!

We have designed these plug adapters in-house and paid for the molding. This allows us to keep costs low and they are exclusive to HobbyKing, meaning you will not find these XT60 plug adapters anywhere else!

The XT60 adapters are made from high-temp nylon and gold plated spring connectors, both are included in the injection molding process at the time when forming the connector.

This set includes:
2 x XT60 Male to EC3 Adapter Plug

4.0mm to 4.0mm Gold Male to Male Adaptor (5pc)

Mini T-connector charge lead with 4mm banana plugs.

Specs:
Weight: 15g
Lead Length: 300mm
Wire Gauge: 16AWG

A handy adapter to convert an EC5 equipped battery to a T Plug connector. Useful for use with a T plug equipped ESC or Charge lead.

Spec:
Weight: 11g(Each)

T-Connector to EC5 Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a EC5 Plug for use with a EC5 equipped ESC or an EC5 Charge lead.

T-Connector to HXT4mm Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a HXT4mm for use with a HXT4mm equipped ESC or an HXT4mm Charge lead.

Mini Tamiya to T-Connector Battery Adapter (2pcs/bag)

This adapter will convert a Mini Tamiya equipped battery to a T-Connector for use with a T-Connector equipped ESC or a T-Connector Charge lead.

A handy adapter to convert an XT60 equipped battery to an MPX style connector. Useful for use with MPX equipped ESC or Charge leads.

Spec:
Weight: 5.3g(Each)

A handy adapter to convert a T plug equipped battery to an XT90 connector. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 10.6g(Each)

HXT 4mm bullet to XT90 Battery Adapter (2pcs)

This adapter will convert a 4mm bullet equipped battery to a XT90 for use with a XT90 equipped ESC or a XT90 Charge lead.

XT90 to 4.0mm bullet Battery Adapter (2pcs/bag)

This adapter will convert a XT90 equipped battery to a 4.0mm bullet for use with a 4.0mm bullet equipped ESC or a 4.0mm bullet Charge lead.

A handy adapter to convert an XT90 equipped battery to an EC5 connector. Useful for use with an EC5 equipped ESC or Charge lead.

Spec:
Weight: 15.3g(Each)

A handy adapter to convert an XT90 equipped battery to an XT60 plug. Useful for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 12g(Each)

A handy adapter to convert an XT60 equipped battery to an EC5 plug. Useful for use with an EC5 equipped ESC or Charge lead.

Spec:
Weight: 11g(Each)

HXT3.5mm to XT60 Battery Adapter (2pcs/bag)

This adapter will convert a HXT3.5mm equipped battery to a XT60 for use with a XT60 equipped ESC or a XT60 Charge lead.

A handy adapter to convert an EC5 equipped battery to an HXT 4mm connector. Useful for use with an HXT 4mm equipped ESC or Charge lead.

Spec:
Weight: 17.6g(Each)

A simple way to connect two EC5 equipped battery packs in parallel.

Spec:
Dimensions: 57 x 20 x 20mm  
Weight: 26.8g (each)

HXT4mm to EC3 Battery Adapter (2pcs/bag)

This adapter will convert a HXT4mm equipped battery to a EC3 Plug for use with a EC3 equipped ESC or a EC3 Charge lead.

A JST male plug to 2.54mm pitch male jumper lead for a variety of uses.

This lead is the best solution for batteries that are slightly out of balance; simply plug it into the individual cells on the balance lead, select a 1S charge rate and you can charge them one at a time to ensure they are all at optimum charge. 

Only use this method to restore cells that are slightly out of balance and remember that there could be something wrong with one of the cells so keep a close eye on it while charging.

Overall length: 70mm

JR to EH Adapter wire (2pcs/bag)