Bargain Bin

Missing something? This replacement nose cone and foam insert will get you back in the air in no time. Designed for the Sidewinder Racing Wing 1100mm PNF, buy these quality spare parts for the lowest prices at HobbyKing.

These are Micro Engineerings HO/N scale Code 70 to 55 slide on plastic insulating rail joiners. These insulating joiners are perfect for where you want to electrically isolate sections of track when transitioning from Code 70 to Code 55 rail.

3.5mm Male/Female bullet on opposing ends.

Made of TPU material, this flexible camera mount fits the Foxeer Box Cam and other action cameras. The TPU creates a soft protective layer for the camera and absorbs excess vibrations.

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

JR Gold Plated Connectors are for JR style plugs. If you have ever had a servo lead where the wire has come off the connector then these contacts are just what you need for a repair. Although you can connect these to wires using a pair of needle nose pliers the best way is to use our JST Crimping Tool.

This bearing detergent is the perfect partner to Mini Vibrating Cleaning Unit. Mix this detergent with water for removing grease, dust and other contaminants from bearings, gears, watch parts, jewelry and lots of other small intricate parts.

Durafly Bonanza - Replacement Wingtip Fuel Tanks

Durafly Bonanza - Replacement Spinner

Durafly EFX Racer - Replacement Battery Hatch (Orange).

Furious FPV is very quickly earning a reputation for producing high quality FPV products. Their build quality is excellent and the Poker Chip Antenna is no exception. The Poker Chip patch antenna is small and light with a 10dBi gain and is a perfect match to the Furious FPV Achilles Diversity Receiver Module. So if you are looking for a new antenna for your FPV goggles then look no further than the Furious FPV Poker Chip. See the attached manual for the radiation pattern and the S-Parameters.

If you are worried about scratching the Evolution PROs screen or damaging a control stick during transportation then this cover meets all your requirements. It simply clicks onto the front of your controller to safely guard the screen and sticks. It comes in black or white.

If you are worried about scratching the Evolution PROs screen or damaging a control stick during transportation then this cover meets all your requirements. It simply clicks onto the front of your controller to safely guard the screen and sticks. It comes in black or white.

A replacement pair of control horns for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of control horns for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement Wing Spar for the blue 750mm XFLY Sukhoi Su-27 Flanker.

This Bluetooth module makes the programming of your Aerostar RVS G2 HV electronic speed controller extremely easy, simply download the Aerostar App to your Android smartphone or smart device and you are ready to connect and set up your ESC (see under the "Files" tab for the link to the App).

Programmable settings using the Bluetooth module:
• Brake Type: Off/Soft/Mid/Hard
• Motor Timing: Auto/High/Mid/Low
• Motor Rotation: CW/CCW
• HEF (High Efficiency Function: On/Off
• Cell Count (HV Version): Auto/6S/8S/10S/12S/14S
• LVC (Low Voltage Cut-Off/HV): Off/2.3V/2.5V/3V/3.2V/3.2V/3.4V/3.6V
• Voltage Cut-Off Type: Reduce Power/Cut-Off Power
• Start-Up Power: Low/Med/Hard
• Restore Factory Defaults

The G2 HV factory defaults are shown in "Bold".

Please note: This Bluetooth module is only compatible with the Aerostar RVS G2 HV ESC range. It is incompatible with the non-HV series of G2 ESCs, earlier versions of the Aerostar RVS HV ESC, or the ZTW brand of ESC..

A replacement set of 16 screws for the 1000mm XFLY A-10 Thunderbolt II Twin.

A replacement linkage set with ballinks for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm (4pcs).

Turnigy Slowfly Propeller 7x3.8 Pusher Black (4pcs).

A strong, well-made neck strap that suits a multitude of transmitters including the FrSky X14 series and many, many more. It includes the Turnigy logo, a quick-release connector, and a sliding, clasp to hook onto the transmitter neck strap attachment.

HobbyKing Bixler 2 EPO 1500mm - Replacement Wing Spar

30mm JR Male/Male 26AWG Servo Lead.

Specs:
Connectors: 2 x male JR type
Length: 30mm
Wire Gauge: 26AWG
Wire Insulation: PVC
Weight: 2g each
Quantity: 10pcs

The Tamiya battery/power connector has been with us for many years. They are still extremely popular being easy to fit, they make a good secure connection, and they can handle moderate currents.

Specs:
Gender: Female nylon housing with male pins
Weight: 2.3g each
Quantity: 10pcs

The Mini Tamiya battery/power connector has been with us for many years. They are still extremely popular for smaller models and are easy to fit, make a good secure connection, and can handle moderate currents.

Specs:
Gender: Male nylon housing with female sockets
Weight: 2g each
Quantity: 10pcs

The perfect solution to connect 2 batteries with 4mm HXT connectors in series.

These are the smallest connector in the EC series of connectors. They use 2mm gold plated pins and sockets will accept up to 16AWG wire and are rated at up to 20 amps. They are easy to fit, make a small neat connection with good contact. These are perfect for small drones and other small models.

Specs:
Gender: Male and Female
Weight: 2g each
Quantity: 5 male and 5 female w/pins and sockets

2.5mm PCB Mounted DC Power Socket (5pcs).