Bargain Bin

Universal Mount - M3.5 Fastener kit

Included:
M3.5x17mm Screw * 4
M3.5x12mm Screw * 4
10x4x2mm Washer * 4
10x4x1mm Washer * 4

Alloy Anti-Slip TX Control Sticks Short (M3 for Futaba TX - Blue) - 12mm long + locknut, Total: 24mm

5.6mm x 18mm M3 Nylon Tapped Spacer (10pc).

Perfect for mounting Multi-rotor control boards.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Turnigy 9XR FPV Monitor Mounting Arm.

A mounting arm specially designed to hold Telemetry units or FPV Monitors on
top of your 9XR.
Compatible with most standard FPV monitors and our Quanum Telemetry system.

*Requires the 9XR Transmitter Stand (see related items)

3x30P Pin Socket - 2.54mm Pitch (5pcs/bag)

Perfect for DIY electronics projects.

Trainer Port/RF PCB Assembly - Turnigy 9XR Transmitter

Mask (Chrome) - Turnigy 9XR Transmitter

Trim Tabs - Turnigy 9XR Transmitter (4set)

This is a stock replacement for your Turnigy 9XR transmitter faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Silver

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Metallic red

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Gold

Customize your Turnigy 9XR with this optional colored faceplate!

Add a cool and custom look to your 9XR by simply bolting on this optional faceplate. Available in a variety of colors, you can make sure your 9XR will not get confused with others at your flying club.

This is a direct replacement for your stock 9XR faceplate and takes just minutes to install. Simply unbolt the original and replace with this.

Specs:
Application: Turnigy 9XR
Color: Metallic blue

Transmitter Neck Strap Adaptor (Blue)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.

Transmitter Neck Strap Adaptor (Red)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.

Transmitter Neck Strap Adaptor (Silver)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.

Transmitter Neck Strap Adaptor (Gunmetal Black)

Improve the stability of your 2.4ghz transmitter with one of these CNC anodised alloy neckstrap adaptors. 2 types of adaptors are supplied plus screws which will fit most radio's.

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2 x 4mm
Weight: 0.07g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 6mm
Weight: 0.21g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.81g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.55g(Each)

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set includes the separator tool. Additional adapter sets for T-plugs are available here

Also available for XT-60

Specs:
Plug Type: T-Plug
Qty: 20
Weight: 0.9g (pair)

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set does not include the separator tool. Adapters with the separator tool included can be found here

Also available for XT-60

Specs:
Plug Type: T-plug
Qty: 20
Weight: 0.9g (pair)

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Males.

Also available as:
XT-60 Female
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Females.

Also available as:
XT-60 Male
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Female
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Males.

Also available as:
T-Plug Female
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females.

Also available as:
T-Plug Male
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Female
Qty: 6 pieces
Weight: 3g

 
 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females/Male

Also available as:
T-Plug Male
T-Plug Female

Specs:
Plug Type: T-Plug Female/Male
Qty: 12 pieces (6 Male, 6 Female)
Weight: 3g

Increase your RC signal validity and reduce your probability of signal loss in carbon fiber and/or 3D airframes as well as long-range FPV platforms by using the OrangeRX DSMx/DSM2 compatible 6 Channel Diversity Module.

The OrangeRX DSM2/DSMx Compatible 6 Channel Diversity Module will receive data from up to 6 satellite receivers, check the signal validity, and then outputs the valid signal to any satellite interface-enabled DSM2/DSMx compatible receiver or via direct connection to a UAV or Flybarless Helicopter Flight Controller.

The unit can be powered from external 5V~8.4V or directly from the 3.3V satellite port and incorporates a binding function allowing satellites to be bound without using any additional receiver.

This high quality switch is made in Taiwan and is proven to exceed more than 10000 switch cycles during testing.
This switch is designed for life time use.

Great for repairing your radio or making a swtich for your own project.

Spec.:
Style: 2-Way, Round Head
Dimension(LxWxD): 13x8x7mm(Plastic part only)
Length: 29mm(Switch & Mounting hole)
Mounting Hole Size: M6x8mm
Weight: 3.7g(Each)

30P Pin Header and Socket - 2.54mm Pitch (5 pcs)

Perfect for DIY electronic projects.

This compact, lightweight power supply filter helps clean up dirty DC current that often causes lines in wireless video images. The filter is an LC type that uses large value inductor and capacitor components. Their values are robust enough to remove moderate amounts of power supply noise.

The filter reduces DC-DC switcher supply ripple and helps clean noisy power from a shared battery. For example, if your robot or R/C model's 12V motor battery also powers the video camera and A/V transmitter, then this LC filter can help reduce the video "noise" that may appear when the motor is running.

Note: Installations with severe power supply noise may not be fully cured with this filter. In such cases a shared battery should be avoided.

Features:
• L-C Filter circuit reduces DC supply noise
• Built-in Reverse Polarity protection
• Supports up to 14 VDC at 1.7 Amp (maximum)
• Compact design

Specs:
Voltage drop over filter: 225mV at 900mA
Impedence/ESR: 0.06Ohm at 100kHz/16V
Ripple Current: 1190mA
DC Resistance: 0.25 Ohm/path
Dimensions: 38x12.5x11.5mm
Weight: 6.4g

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 1m
Color: Grey

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 1m
Color: Pink