Bargain Bin

Italeri acrylic paints are easy to use and can be applied with a brush or an airbrush (dilution required). The Italeri range of acrylic paints are odorless and non toxic.

The paints are supplied in 20ml bottles and have a flip-top cap to prevent spills.

Specs:
Color: Flat marrone mimetico  1
Volume: 20ml
Weight: 38.60g

Servo Tape (Clear) 25mm x 1m

This awesome servo tape is super strong and when the backing is removed it is completely clear. This tape has the amazing property of being very sticky and will securely fasten your servos, receivers, speed controls and transponders to your aeroplane, helicopter car or boat, yet when you wish to remove them, they come right off without the servo tape breaking apart plus there is no residue left on the surface!!

Very clean, very secure and incredibly versatile.

Size
Width: 25mm
Depth: 1mm
Length: 1m

Self Adhesive Wing Tape 45mic x 45 mm x 100m ( Wide - Red) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 45 mm x 100m ( Wide - Orange) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 45 mm x 100m (Wide - Black) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 24 mm x 100m (Narrow - Yellow) - Perfect for adding strength and color to your foam model!

Dytac 20 Inch SPR Outer Barrel Assembly for Marui M4 (Silver)

Features:
• 20 inch SPR Outer Barrel Set 
• Aluminum construction barrel
• Comes with low profile gas block and gas tube
• Designed for Tokyo Marui M4/M16 AEG
• Silver color

Spec: 
Material: Aluminum
Color: Silver
Weight: 466g
Overall length: 505mm
Barrel threads: there is no thread on this barrel
Barrel Type: Rifle length
Based model: Tokyo Marui M4/M16 AEG
Manufacturer: Dytac

Package Includes:
1x 20 inch SPR Outer Barrel
1x Low profile gas block
1x Dummy Gas Tube

Dalprops "Indestructible" PC 5040 4-Blade Props Yellow (CW/CCW) (2 pairs)

Dalprops propellers have raised the bar in the drone racing community, with this range of pre-balanced, "indestructible” propellers made from super tough polycarbonate. (OK, we'll confess that they're not completely indestructible if you'll admit that they're pretty tough to bust!)

Dalprops propellers give smooth power delivery while being able to give plenty of power for punch outs.

They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with multirotor orientation. This is a fantastic upgrade for any small multirotor.

Specs:
Size: 5040 (5.0" x 4.0")
Blades: 4
Color: Yellow 
Hub: 5mm
Material: Polycarbonate
Weight: 4.0g

Included:
2 x CW rotation
2 x CCW rotation

Dalprops "Indestructible" PC 5040 4-Blade Props Green (CW/CCW) (2 pairs)

Dalprops propellers have raised the bar in the drone racing community, with this range of pre-balanced, "indestructible” propellers made from super tough polycarbonate. (OK, we'll confess that they're not completely indestructible if you'll admit that they're pretty tough to bust!)

Dalprops propellers give smooth power delivery while being able to give plenty of power for punch outs.

They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with multirotor orientation. This is a fantastic upgrade for any small multirotor.

Specs:
Size: 5040 (5.0" x 4.0")
Blades: 4
Color: Green 
Hub: 5mm
Material: Polycarbonate
Weight: 4.0g

Included:
2 x CW rotation
2 x CCW rotation

Dalprops "Indestructible" PC 5040 4-Blade Props Purple (CW/CCW) (2 pairs)

Dalprops propellers have raised the bar in the drone racing community, with this range of pre-balanced, "indestructible” propellers made from super tough polycarbonate. (OK, we'll confess that they're not completely indestructible if you'll admit that they're pretty tough to bust!)

Dalprops propellers give smooth power delivery while being able to give plenty of power for punch outs.

They come packaged as a set of 4, with 2 CW rotation and 2 CCW rotation and in a wide range of colors to mix and match to help with multirotor orientation. This is a fantastic upgrade for any small multirotor.

Specs:
Size: 5040 (5.0" x 4.0")
Blades: 4
Color: Purple
Hub: 5mm
Material: Polycarbonate
Weight: 4.0g

Included:
2 x CW rotation
2 x CCW rotation

Nylon Spacer 20mm M3 F/F Red (10pcs)

Specs:
Shape: Hex
Length: 20mm
Screw Thread: M3 Female/Female
Qty: 10 

Nylon Spacer 10mm M3 M/F Orange (10pcs)

Specs:
Shape: Hex
Length: 10mm
Screw Thread: M3 Male/Female
Qty: 10 

There's a lot to be said for the simple things in life, and with RC equipment becoming ever more flexible it's a refreshing change to find a simple, 4 channel radio that dispenses with the need for programming before you can use it.

The Turnigy TGY-i4X AFHDS/2A does exactly that and is a great entry level 4-channel telemetry 2.4ghz transmitter that can be switched between 1st and 2nd generation Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology. The Turnigy TGY-i4X has a nice quality look and feel, while the programming is limited to one-switch V-tail/elevon mixing and servo reversing only. The transmitter is capable of being upgraded to up to 10 channels, see manual for details.

An ergonomically designed, ultra slim case design fits comfortably in your hands, an advantage during long flights. Digital trims and easy to read battery indicator LEDs give the TGY-i4X a modern feel with all the essential features you need. With a low profile antenna, the TGY-i4X is easy to transport and store. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers.

The TGY-i4X comes with the TGY-i4X 4-channel receiver and is a superb budget radio for both new and experienced pilots alike!

Features:
• Entry level 4 channel 2.4ghz radio
• One switch V-tail/elevon mixer
• Easy to use servo reversing switches
• Standard Wing/Elevon/V-Tail
• Trainer port
• Simple LED battery indicator
• 1-Button binding

Transmitter Specs:
Channels: 4 (Expandable to 10)
Frequency: 2.40~2.48GHz
Bandwidth: 500KHz
DSC Port: PS2
Output: PPM Charger
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142 RF
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 6V (4 x AA batteries)
Range: 100~300m
Dimensions: 174 x 89 x 190mm
Weight: 335g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Receiver Specs:
Channel: 4
Frequency: 2.40~2.48GHz
Power: 4.5V~6.6V/<30ma
Weight: 13g
Antenna length: 26mm
Dimensions: 45 x 23 x 9mm

Included:
Turnigy TGY-i4X transmitter
Turnigy TGY-i4X receiver
Bind plug
Manual

Requires:
4 x AA batteries

Instruction Manual is available under the "Files" tab.

Spare Part - Cannon Blisters for Spitfire Mk5 ETO scheme (Green/Grey)

Spare Part - Cannon Blisters for Spitfire Mk5 desert scheme

Replacement 4.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Nylon Linkage Stopper 0.85 x 1.75 x 6mm (10pcs)

Specs:
Material: Nylon
Fits: 0.85mm Pushrods
Lock Screw: 1.75mm
Body length: 6mm
Weight: 0.11g

Nylon Aileron Control Arm 1.35 x 1.35mm

Specs:
Material: Nylon
Fits: 1.35mm screw threads / 1.35mm push rods
Weight: 0.20g

Medium Sized Nylon Landing Gear Saddle Clamps (10pcs)

Specs:
Material: Nylon
Fits: 1.45mm (wire gauge)
Weight: 0.18g Per Set
Dimensions: 15 x 10mm 

Lightweight Aluminium Round Section Spacer M3x38mm (Silver) (10pcs)

Lightweight aluminium spacers featuring a round cross section and a hex section (at each end) to fit a 5mm spanner. Ideal for use with helicopter and drone frames or similar applications where strong, accurate construction is required.

Specs:
Thread: M3
Length: 38mm
Weight: 1.5g each

Spare Part for Night Walrus - Main Wing

Spare Part for Night Walrus - Fuselage

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement fuselage 1350mm (53.33in)

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Main Wing 1875mm(72.25in)

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Vertical Stabilizer

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Engine cowlings.

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Belly Ball Turret.

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement canopy / battery hatch.

The Grove indoor environment kit has been designed to make creating environmental applications intuitive and as simple as possible.

When used with the included Base Shield V2 as the Arduino breakout board, the kit allows you to plug in up to 11 different sensors and actuators to build a complete environment monitoring system customized to your own needs.

Regularly updated demo codes are provided on the Grove website (http://www.seeed.cc/projects.html?t=Grove) for a wide range of projects from a simple thermometer to hydroponic control systems. Adding additional sensors expand the possibilities even further. There is also a full tutorial section covering all aspects of the Grove kit.

A brilliant and practical introduction to the fascinating world of robotics and coding, perfect for inquisitive minds!

Features:
• Easy to understand kit
• Arduino compatible
• Online community support
• 11 Sensors/actuators included

Specs:
Base Shield:
Operating voltage: 3.5~5.5V
Dimensions 55 x 70mm

HV Relay:
Voltage: 250V
Current: 10A
Dimensions: 42 x 24 x 19.5mm
(Always consult a qualified electrician before working with high voltage applications)

Rotary Encoder:
Voltage: 4.5V~5.5V
Current: 10mA~30mA
Dimensions: 20 x 20mm
Weight: 12g

Piezo Buzzer:
Voltage: 4~8V
Sound Output: ≥85dB
Frequency: 2300Hz +/- 300Hz

Servo:
Voltage: 4.8~6V
Speed: 0.10sec/60° @ 6V
Torque: 1.8kg/cm @ 6V
Dimensions: 24 x 23 x 12mm
Weight: 8.5g

Included:
Base Shield V2
Momentary button
Piezo buzzer
Rotary encoder
Backlit LCD display
Light sensor
PIR motion sensor
Moisture sensor
High voltage relay
UV sensor
Servo
TH02 multi-function sensor

ARC R11 1/10 Electric Touring Car - R11 Rear (Long) Shock Tower

Part Number: R118023

ARC R11 1/10 Electric Touring Car - R11 Suspension Block #2

Part Number: R112020

This latest addition to the XT60 range provides an integrated mount on the side of the XT60 with a 5mm mounting hole. This can be used to fix it to a drone frame (via a cable tie) or can be mounted to a frame stand-off. It could also be mounted to a battery tray in a plane or boat.

We all know the GoPro Hero as the take-it-anywhere workhorse of an action camera. Boldly going where no action cam has gone before; but how about giving your investment a little more protection from the dust and grime of everyday use?

The Master Airscrew GF series of propellers are specially designed for sport flying and high performance model RC aircraft with electric motors and I.C. engines. They are made of a glass fiber reinforced composite material for strength and durability, each propeller is supplied factory balanced.

Specs:
Diameter: 10" (254mm)
Pitch: 5"(127mm)
Hub Thickness: 1/2" (12.7mm)
Shaft Diameter: 1/4"~5/16" (6.35mm~7.94mm)
Weight: 0.74oz (21g)
Rotation: Normal/Tractor
Material: Glass fiber composite
Color: Black