$2 - $4.99
-
FPV Tilt Camera Mount with Landing Gear$21.99The HobbyKing FPV tilt camera mounting system is a simple and easy way to mount your camera. Suitable for 450~500 class helicopters and made from light weight fibre glass material. The mounting plate features adjustable screw locations for mounting your heli and for relocating the camera mount to attain correct CoG. Kit includes screws, ball sockets, connection rods, linkages and pre-cut fiberglass board.Spec:Height: 185mm (to mounting plate)
Skid width: 190mm
Skid length: 290mm
Camera mount area width: 110mm
Camera mount area height: 100mm
Dry Weight: 188g (not including servo)Material: Fibre Glass
Required:1 x 9g ServoLearn More -
Insta-Cure IC-Gel .7 oz$6.88Insta-Cure IC-Gel .7 ozIC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE; IC-Gel, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL that you want.IC-GEL is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET allows IC-GEL to be sanded or filed to final shape in less than 20 seconds. Autobody repairmen have finished their jobs in a fraction of the time by using IC-GEL with the additional advantage over normal body putties of superior bonding to metal surfaces. IC-GEL, along with MAXI-CURE, is also used for the underwater bonding of coral to rock.Learn More -
Insta-Set CA Accelerator 2. oz$5.42Insta-Set CA Accelerator 2. ozINSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joints strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.Learn More -
HK-171 Thread Locker & Sealant Medium Strength (Blue)$4.99HK-171 is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once HK-171 is cured, the fasteners can be disassembled with standard hand tools if required.Learn More -
HobbyKing® ™ GT-2 2.4Ghz Receiver 3Ch$7.60HobbyKing® ™ GT-2 2.4Ghz Receiver 3Ch.Please note: This receiver is compatible with the GT2E radio, the radio however will need to be switched to AFHDS1 protocol mode, this is outlined in the radio's user manual.Specification:Model: Car/BoatChannels: 3chFrequency band: 2.4GhzModulation: GFSKSensitivity: 1024RF. receiver sensitivity: -100dbmFail Safe: YesPower: 4.5~6VDCWeight: 5gAntenna length: 26mmSize: 37.6 x 22.3 x 13mmCE & FCC certified
Learn More -
Replacement Propeller Blade Set for Durafly Curtiss P-40N Warhawk.$5.31Replacement propeller blade set for Durafly Curtiss P-40N Warhawk.
Learn More -
HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set$3.81HobbyKing® Bixler 3 Trainer 1550mm - Replacement Wheel Pant Set
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set$3.87HobbyKing® Bix3 Trainer 1550mm - Replacement Control Rod Set
Learn More -
HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter$3.55HobbyKing® Bix3 Trainer 1550mm - Replacement Prop Adapter
Learn More -
Nylon Spinner with Alloy Backplate 70mm Black$8.47Excellent Quality Nylon Spinner with Lightened Alloy Backplate 70mm Yellow - Mount hole 8mm
Learn MoreWeight: 47g
-
Turnigy Wooden Slowfly Propeller 15x4.5 (CCW) (1pc)$11.29Wooden 15x4.5 propeller (1pc/bag)
Learn More -
Turnigy 13x4.7 Slowfly Pusher Propeller Black (2pcs)$5.77Turnigy Carbon Mixed slow fly prop w/adapters 13x4.7 SF pusher..
Learn More -
Turnigy 13x4.7 Slowfly Propeller Black (2pcs)$5.9713x4.7 SF Turnigy Carbon Mixed slow fly prop w/adapters (2 pcs).
Learn More -
Turnigy 14x4.7 Slowfly Propeller Black (2pcs)$6.49Turnigy Carbon Mixed slow fly prop w/adapters 14x4.7 SF (2 pc).
Learn More -
Turnigy 14x4.7 Slowfly Propeller Pusher Black (2pcs)$6.56Turnigy 14x4.7 Slowfly Propeller Pusher Black (2pcs).
Learn More -
Desert Fox Printed Body Panels Full Set (1 set)$16.09Desert Fox Printed Body Panels Full Set (1 set)
Learn More -
-
Desert Fox Dirt Proof Cover (Clear) (1 set)$11.84Desert Fox Dirt Proof Cover (Clear) (1 set)
Learn More -
BT-4 Rear Suspension Arm Mount R2.0 TU1007$8.53BT-4 Rear Suspension Arm Mount R2.0 TU1007
Learn More -
-
Progressive Shock System for BT-4$19.24Progressive Shock system for BT-4 gives a progressive dampening effect through the shock travel so the effect is softest at the start and harder at the end. Includes blank shock pistons so you can drill your own holes for precise tuning to your individual needs.
Specs:
Learn More
Length: 14mm
Diameter: 11mm
Piston: 10mm x 2mm -
Durafly Plywood Equipment Mount for FPV Flying (Kit)$3.99A kit of plywood parts for the Durafly Tundra V1, V2, V3, and Night to build a mount/tray for your FPV equipment. The Tundra series is the perfect mount for FPV flying due to its stability and slow flying characteristics.
Learn More -
Basher RZ-4 1/10 Rally Racer - Composite Rear Upright (2pcs)$7.98Basher RZ-4 1/10 Rally Racer - Composite Rear Upright (2pcs)
Learn More -
Multistar Timber T-Style Propeller 9.4x4.3 White (CW/CCW) (2pcs)$11.88The MultiStar White edition multirotor propeller started as an optimized blade design for the target motor/RPM combinations in Multirotor use. After comparing a host of construction options, a wood core was selected for its super stiff property’s, light weight and vibration resistant properties.
The MultiStar White Edition Propellers come packaged in a set of two CW/CCW and matching mounting hardware and thrust washers. The high visibility White color adds safety and style to your multi-rotor setup.
Specs:
Size: 9.4X4.3
Mounting Style: Hub Style with CW/CCW shaft nuts includedIncluded:
Learn More
One CCW and one CW propeller
Mounting Hardware and thrust washer (DJI Style shaft nuts) -
Clear Body - Basher PBull 1/18 4WD Desert Buggy$10.47Clear Body - Basher PBull 1/18 4WD Desert Buggy
Learn More -
TrackStar Shock Bottom Cap Set with O-Ring S120052$5.31TrackStar Shock Bottom Cap Set with O-Ring S120052
Compatible with the following Shock Absorbers
Learn More
S12400, S160023, S160026, S160085, S160100, S124300, S160323, S160326 -
TrackStar Hardened Shock Shaft 3.2 x 48mm (4) S162048$3.72TrackStar Hardened Shock Shaft (x4)
Specs:
Diameter: 3.2mm
Length:48mmCompatible with the following Shock Absorbers
Learn More
S160100 -
TrackStar Suspension Spring Gold 14 x 55mm 1.2KG (4) S169355$3.60TrackStar Suspension Spring (x4)
Specs:
Wire Thickness: 1.1mm
Internal Diameter: 14mm
Length: 55mm
Spring Rate: 1.2Kg
Color: GoldCompatible with the following Shock Absorbers
Learn More
S160023, S160026, S160323, S160326 -
T-Style Propeller 15x5.5 Red (CW/CCW) (2pcs)$20.26These propellers are beautifully finished and highly efficient
APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)
Learn More -
T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)$10.60These propellers are beautifully finished and highly efficient
T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)
Learn More -
Pulse / Heart Rate Sensor Module for Arduino$11.74Pulse / Heart Rate Sensor Module for Arduino
Learn More
Specs:
Dimensions: 15 x 2mm
Weight: 2.66g -
OSD Module for Shark X6/X8 Flight Controllers$34.28On screen display (OSD) module for Shark X6/X8 flight controllers.
Specs:
Input voltage: 5V DC
Operating Temperature: -10°C ~ 50°C
Cable length: 130mm
Dimensions: 33 x 20 x 11mm
Weight: 10.5gIncluded:
Learn More
OSD module -
EK3560 Light Follower Car$5.84One of a series of four DIY robot car kits, these are great value and great fun for kids of all ages to put together.
You will only need some basic tools, some solder and a soldering iron and within a few hours you will have an operating robot car.This model is activated by light sensor and will respond to a flashlight or other direct light source.
Learn More
Includes:
1 x Light controlled robot car kit
Note: This robot does not require programming. -
EK3170 OBSTACLE AVOIDER$7.23One of a series of four DIY robot car kits, these are great value and great fun for kids of all ages to put together.
You will only need some basic tools, some solder and a soldering iron and within a few hours you will have an operating robot car.This model is an obstacle avoider, with a sensor that detects objects to its front.
Includes:
1 x Obstacle avoiding robot car kitNote: This robot does not require programming.
Learn More -
EK5400 Wind Power Kit - Charger$3.69Make use of that free wind power electricity!
For use with the EK5100 Wind Turbine kit is this versatile charging unit.
Simply connect it up to your wind turbine and it can be used to charge your mobile phone, your ipod or your rechargable batteries.
Includes:
Learn More
Ek5400 Charger
Leads and cables
Login and Registration Form