Bargain Bin

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 70mm Yellow - Mount hole 8mm

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 75mm White - Mount hole 8mm

Weight: 59g

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 75mm Yellow - Mount hole 8mm

This extendable magnetic pick-up tool is a great addition to any toolbox, it makes picking up small metal parts that fall in hard to reach places extremely easy.

Specs:
Magnet Diameter: 7mm
Extended Length: 635mm
Magnet Strength: 1.5kg lift capacity

YEP ESC series offers a super smooth linear throttle response making them exceptional fixed-wing and helicopter ESCs.  The features offered in this ESC are only matched by the most expensive European brands at a fraction of the cost. The super-smooth soft start, along with its ultra-high-resolution throttle response puts this ESC in a class of its own!

YEP ESC series offers a super smooth linear throttle responce making them exceptional fixed wing and helicopter ESCs.  The features offered in this ESC are only matched by the most expensive european brands at a fraction of the cost. The super smooth soft start, along with its ultra high resolution throttle response puts this ESC in a class of its own!

Following on from the success of the YEP speed controllers we now have a watercooled version for marine use. It has all the fantastic features of the other version but this one also incorporates a water cooling system and the entire ESC has been coated in a water-proof compound for protection against moisture. The features include super smooth start and ultra high resolution throttle response which puts these ESC's in a class of their own.

Desert Fox Printed Body Panels Full Set (1 set)

Desert Fox Clear Body Full Set

Desert Fox Dirt Proof Cover (Clear) (1 set)

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

 The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

 The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Diff. Case - BSR 1/8 Rally

BT-4 Rear Suspension Arm Mount R2.0 TU1007

BT-4 Straight shaft (Spool) TU1042-2

Progressive Shock system for BT-4 gives a progressive dampening effect through the shock travel so the effect is softest at the start and harder at the end. Includes blank shock pistons so you can drill your own holes for precise tuning to your individual needs.

Specs:
Length: 14mm
Diameter: 11mm
Piston: 10mm x 2mm

Hardened Helicopter Pinion Gear 2.3mm/0.5M 9T (1PC)

Hobbyking™ Hardened Steel Pinion gears are the last pinion gears you will ever need to purchase. The Pinion gears are machined from a special steel alloy and are hardened for ultimate strength and durability. During the manufacturing process, extremely tight tolerances are maintained so the pitch of the gear is precise. This means Hobbyking™ Pinion gears run very quietly and efficiently.

As Brass or Aluminum gears wear, the interface between the pinion and spur gears degrade. The hardened Pinions are so tough that you can eliminate the need for spare gears in your toolbox. The Pinion gears are also strong enough to survive any insane power system that you choose to fit in your 3D helicopter.

Specs:
Pitch: 0.7M
Tooth Count: 12T
Fits Shaft Size: 6mm
Weight: 2.65g

Hardened Helicopter Pinion Gear 6mm/0.7M 19T (1PC)

Hardened Helicopter Pinion Gear 6mm/1.0M 16T (1PC)

These replacement drivers have been specifically designed to fit the Turnigy high quality drivers and drive sets (rubber handled type). The replacement shafts are manufactured from high tensile steel and are hard coated to prevent corrosion.

Specs:
Drive Type: Flat head screwdriver
Tip Size: 5mm
Shaft Diameter: 5mm
Shaft Length: 120mm
Weight: 17.06g

Durafly™ EFX Racer - Replacement Battery Hatch (Red)

This set consists of the lower front fuselage skid plate and the wing center section/belly skid plate for the Durafly EFX Racer series of airplanes.

A kit of plywood parts for the Durafly Tundra V1, V2, V3, and Night to build a mount/tray for your FPV equipment. The Tundra series is the perfect mount for FPV flying due to its stability and slow flying characteristics.

Durafly® ™ Tundra - Decal Set 

Replacement fuselage for the Durafly Supermarine Spitfire Mk1a & Mk2a 1100mm series.  Comes with magnets and plastic fittings but does not include cowl or battery hatch. 

Replacement Durafly™ Spitfire Mk1a & Mk2a Main Wing, comes with control horns installed.

Please note:  No servos or extension leads are supplied with the replacement wing.

Basher RZ-4 1/10 Rally Racer - Composite Rear Upright (2pcs)

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

Possibly one of the hottest debates in recent R/C history...balsa or foam? This is the shirt all of you balsa bandits have been waiting for. Slap your foamy friends across the face and tell them to read this.

Size: Large

*Note: Other sizes available

TrackStar TS3t Temperature Sensor for Electric Car/Boat

Specs:
Lenght: 390mm
Plug: JR plug