Bargain Bin

Alu Undercarriage (1pair/bag)

Size:255mm 
Weight: 108g / pair

The HobbyKing helicopter pitch gauge is made from ultra-rigid fiberglass board and features dual ball bearings to ensure accurate measurements every time. This pitch gauge is supplied in kit form to keep production costs down which means we can pass the savings on to you!

Specs:
Measurement: +/- 20 Deg
Size: 145mm x 105mm
Max Blade Width: 80mm

Note: An assembly guide can be found in the FILES tab below.

Super Kinetic - Replacement Brushless Motor (2630-KV1000)

HobbyKing™ Bix3 Trainer 1550mm - Replacement Motor 2630 1400kv

HobbyKing™ Wingnetic 805mm - Replacement Fuselage

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 63mm Red - Mount hole 6mm

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 75mm White - Mount hole 8mm

Weight: 59g

Excellent Quality Nylon Spinner with Lightened Alloy Backplate 75mm Yellow - Mount hole 8mm

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Progressive Shock system for BT-4 gives a progressive dampening effect through the shock travel so the effect is softest at the start and harder at the end. Includes blank shock pistons so you can drill your own holes for precise tuning to your individual needs.

Specs:
Length: 14mm
Diameter: 11mm
Piston: 10mm x 2mm

Durafly® ™ Tundra - Decal Set 

Perfect for snorkeling, diving, surfing or any other water based activity where you want to use your Gopro Hero 4 Session to capture the action.  

Made of clear heavy duty plastic, the housing has been designed to allow funtional control of the camera and comes with a heavy duty rubber seal that provides the housing with a depth rating of 40 metres.

Specs:
Material: Heavy duty clear plastic
Weight: 55g
Dimensions: 48 x 48 x 46mm

Spare Part - Premium BNC 1.3m RG223 cable for Scherrer Rx700LR Long Range UHF system

Reliably monitor the voltage of your battery with the Turnigy TGY-CVT01 Voltage Sensor.

As a great alternative to setting a timer, fly or drive your model based on the actual voltage of your battery. This way if your voltage drops quicker than usual due to harder running, you can avoid over discharge your pack. Or, perhaps you're having a nice relaxed day? Enjoy longer run times and don't cut yourself short.

This small, compact sensor is also a perfect way to add piece of mind when running a high performance model by allowing you to check that the battery voltage isn't dropping excessively under load.

For use with the TGY- i10 and i6 transmitters and TGY-iA10 and i6 V2 receivers.

Designed to daisy chain together with other TGY-C series sensors.

Features:
• High quality, compact sensor
• Futaba style input and output connectors
• Great for monitoring battery voltage, no need to set timers anymore
• Works with TGY- i10 and i6 transmitters and TGY-iA10 and i6 V2 receivers

Specs:
Voltage Range: 0~100V DC
Accuracy: +/- 0.1V
Input Voltage: 4.0~6.5V
Working Current: 9mA
Lead length: 195mm
Size: 31 x 15 x 8.5mm
Weight: 6.25g (inc leads and sensor)

Are you looking to convert your SK450 quadcopter into a flying dead cat? If so, we have just the thing! This kit allows you to convert your standard SK450 into the "Dead Cat" style configuration with or without (your choice) the mess and hassle of mounting your own dead feline to the frame.

In addition to flying your deceased family pet around at home or your favorite local flying site, this configuration is also ideal for aerial video/photography as the front arms offer an extra wide field of view. The integrated camera mount plate located at the front of the frame is perfect for mounting a GoPRO or similar sized camera.

This kit includes everything necessary to convert your SK450 quad frame into either a wicked camera rig or a morbid dead pet mobile, the choice is yours!

*Note: This is a conversion kit only, the arms and other components are not included, it requires the use of original SK450 frame parts to complete.

Specs:
Front arm width: 490mm
Rear arm width: 375mm
Weight: 460g (completed frame w/out electronics)

Includes:
Lower main frame plate
Upper main frame plate
All necessary hardware

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2 x 4mm
Weight: 0.07g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M2.5 x 6mm
Weight: 0.21g(Each)

When it comes to hardware, quality does matter! These titanium machine screws not only offer improved strength over steel, they are also much lighter in weight. These are ideal for use in performance models where shaving weight is absolutely critical, or for any project requiring high strength, lightweight hardware.

Spec.:
Size: M4 x 8mm
Weight: 0.81g(Each)

HobbyKing Boat ESC Programming Card

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

Italeri acrylic paints are easy to use and can be applied with a brush or an airbrush (dilution required). The Italeri range of acrylic paints are odorless and non toxic.

The paints are supplied in 20ml bottles and have a flip-top cap to prevent spills.

Specs:
Color: Flat marrone mimetico  1
Volume: 20ml
Weight: 38.60g

Put that sports jersey back in the draw and put on something that represents the hours of fun, skill, late for dinner fights, blood, sweat and beers.

The HobbyKing Apparel is here and ready for you to flaunt at the local flying field. Made from top quality 100% cotton with a reinforced “non-bacon” collar and high quality print, this premium shirt will be around for years to come!...along with your significant other’s disapproval.

The KK2, the shining light for those that want to fly multirotors but don’t want to learn a programming language or sell a kidney to afford it. This is one of those great shirts that the image where to the untrained eye it is just a circuit board unless you stumble a crossed a fellow rotor-head, to which you will most likely get the nod of approval.

Size: MEDIUM

*Note: Other sizes available

A strong, waterproof case for your Xiaoyi action camera with access to all camera funtions and an adjustable universal quick release mount.

Specs:
Weight: 74g

This is a very handy little device that is used to sequence the landing gear doors and landing gear both during extension and retraction.

With the use of spitter leads you are able to sequence an entire gear and door system on many models that require correct sequencing from just one of these units and from a single channel on your reciever.

There are two selectable sequence types and there is an instruction leaflet included.

Specs:
Dimensions: 52x18x5mm
Voltage range: 4.8-6.0v
Weight: 5.5g

*Color may vary

This is an all laser cut ply cockpit that has an integrated Pan and Tilt system and mounts for a complete FPV system. The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

The Base frame has provisions for the FPV transmitter, wiring and battery. The Pan and tilt system has 2quick release mounting positions, the forward position giving an unobstructed clear view, well the back mounting position allows you to reuse the Lexan canopy for a sleek aerodynamic FPV rig. The Pan and Tilt hold a 180deg servo for pan and a 90 deg for tilt (not included). There are various mounting and access holes to accommodate a wide range of FPV cameras from board to cube style.

Features:
• Lasercut pre-built construction
• Can be adapted to other planes
• 2 mounting positions for the Quick release pan and tilt
• Mounting provisions for a full FPV system

Specs:
Weight: 78g
Size: 98x96x221mm WxHxL
Fitment: Direct fit for the Hawkeye 1700 PC FPV plane (can be adapted to others)

Required:
2 x 9g servos, recommend 180deg and Metal Gear.

Lightweight Aluminium Round Section Spacer M3x38mm (Silver) (10pcs)

Lightweight aluminium spacers featuring a round cross section and a hex section (at each end) to fit a 5mm spanner. Ideal for use with helicopter and drone frames or similar applications where strong, accurate construction is required.

Specs:
Thread: M3
Length: 38mm
Weight: 1.5g each

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Vertical Stabilizer

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement Engine cowlings.

Hobbyking 1875mm B-17 F/G Flying Fortress (V2) (Silver) - Replacement canopy / battery hatch.

ARC R11 1/10 Electric Touring Car - R11 Rear (Long) Shock Tower

Part Number: R118023

We all know the GoPro Hero as the take-it-anywhere workhorse of an action camera. Boldly going where no action cam has gone before; but how about giving your investment a little more protection from the dust and grime of everyday use?