Bargain Bin

120mm JST-SH1.0 Servo extension (5pcs/bag)

Spec.
Weight: 0.7g(Each)

8mm Gold Connectors and housing set.

Rated to around 170A
Excellent for high voltage/ high current systems.

Includes:
2 male connectors, 2 femal connectors and 2 housings

Weight: 23g

4mm Gold Plated Banana Plug (10pc)

This adapter will convert a 5.5mm Bullet Connector equipped battery to a T-Connector for use with a T-Connector equipped ESC or Charge lead.

Spec:
Weight: 9g(Each)

Mini black T Connector pack (5 Pairs)

Specs:
Base Dimensions: 5mm x 8mm
Contact Dimension: 3mm x 5mm x 1mm
Rating: 10amps continuous

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the other leads turned on their side for signal only, makes for a clean and minimal vibration transfer installation. Or better yet a single CPPM/SBUS single lead. 

Specs:
Length: 130mm(black/red/white)
Connection: Male JR style plug on each end.

Super flexible 26AWG twisted silicone male to male servo lead. These are specifically made as signal leads for RX to Flight controller connections, the light 26AWG silicone wire is so flexible it transfers virtually no vibration to the Flight controller, well the twist helps reduce inducted noise. If used in conjunction of having only one lead vertical and the leads turned on their side for signal only makes for a clean and minimal vibration transfer installation, or better yet a single CPPM/SBUS single lead.

Specs:
Length: 80mm(black/red/white)
Connection: Male JR style plug on each end.

Mini Tamiya to T-Connector Battery Adapter (2pcs/bag)

This adapter will convert a Mini Tamiya equipped battery to a T-Connector for use with a T-Connector equipped ESC or a T-Connector Charge lead.

A handy adapter to convert an XT60 equipped battery to an MPX style connector. Useful for use with MPX equipped ESC or Charge leads.

Spec:
Weight: 5.3g(Each)

HXT 4mm bullet to XT90 Battery Adapter (2pcs)

This adapter will convert a 4mm bullet equipped battery to a XT90 for use with a XT90 equipped ESC or a XT90 Charge lead.

XT90 to 4.0mm bullet Battery Adapter (2pcs/bag)

This adapter will convert a XT90 equipped battery to a 4.0mm bullet for use with a 4.0mm bullet equipped ESC or a 4.0mm bullet Charge lead.

Hobbyking Bixler 2 EPO 1500mm - Replacement Pushrod Set

This is a great way to avoid power shorts.

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

Rated to 20Amp these connectors are an excellent replacement for JST plugs on todays small yet high C rated batteries.

5mm Male Gold Plated Spring Connector - Low Profile (10pcs)

Pro Tip: If you find the bullets hard to plug in to your battery, take a set of needle nose pliers and gently squeeze two of the six prongs, turn the plug and repeat on the other four prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!   

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 51mm
Overall length: 48mm
Center hole: 6mm
Construction: Aluminum/Nylon
Weight: 20g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 63mm
Overall length: 60mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 26g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 75mm
Overall length: 68mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 43g

Keeping the motor, ESC and battery pack cool can often be a challenge, particularly in the efficient, streamlined models we all love to fly. Turnigy have come up with a great and easy to fit solution; why not let the air in where it's most needed - right at the front!

This range of Turnigy Turbo Spinners have been designed from the outset to allow a high volume of cooling air in via the slots in the tough nylon front molding. This then passes into the motor area through the large holes in the turned aluminum backplate for maximum cooling.
No holes, air scoops or exposed components to spoil the look of your latest pride and joy!    

A stylish and highly practical solution for a wide range of model types and sizes, these Turnigy Turbo Spinners are as easy on the pocket as they are on the eye!

 
Features:
• Integrated cooling channels
• Turned aluminum backplate
• High quality construction
• Easy and fast to fit


 
Specs:
Diameter: 75mm
Overall length: 68mm
Center hole: 8mm
Construction: Aluminum/Nylon
Weight: 43g

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

The Quad plate has 4 10x10mm slots for motor arms and 45x45mm posts for flight controller mounting. The center plate as other provisions for mounting other Bits and holes at 10mm intervals.

Specs:
Size: 100x100mm
Weight: 77g
Color: Green

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 12AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

*This item is only available as 1m lengths, if you wish to purchase longer continuous lengths use R12A1062-06

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application.

Features:
• Super flexible
• High strand count
• Pure silicone outer

Specs:
Diameter: 10AWG
Length: 1m
Temperature Rating: 200°C
Inner Core: Multi-strand
Outer Sheath: Pure silicone
Color: Red

Alloy Prop Saver & Adapter w/ Band
Weight: 2.5g

Please select below for your size;
Available: 4mm

High quality carbon fiber round tube that can be used for many applications or custom projects.

Specs:
Length: 330mm
Outer diameter: 16mm
Inner diameter: 14mm

USBtinyISP V2.0 (Arduino-Compatible) is an ISP downloader for AVR microcontrollers based on the USB interface. It can be used for most AVR microcontrollers to download programs. In Arduino IDE, USBtinyISP is a downloader that is supported at all times, making it simple and convenient to use.

Specs:
Dimensions: 49x48x12mm
Weight: 17.3g

*Note: This is not an original Arduino brand product.

This is a great “bread board” pin ready accelerometer for your Arduino or other microcontroller projects

Features:
• BMA180 three-axis ultra-high performance digital accelerometer, which provides a 14-bit digital output via a 4-wire SPI or 2-wire I 2 C interface
• Full scale measurement range can be set to ± 1g balance, 1.5G, 2G, 3G, 4G, 8G or 16G
• programmable wake-up
• Low-g and high-g detection
• Tap detection
• Slope detection
• Self-test capability
• The sensor also has two operating modes: low noise, low power consumption in a tiny 3x3mm 12-pin LGA package BMA180
• The sensor can be between 1.62 to 3.6V VDD and 1.2 to 3.6V VDDIO supply will typically only consume 650uA standard mode.

Specs:
Size: 21 x 10 x 2.6mm
Voltage: 1.2-3.6v
Output: SPI or I2C

*Note: This is not an original Arduino brand product.