Bargain Bin

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 5/32" (4.0mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Very well made and finished lightweight alloy oleo struts with offset and trailing link, they are sprung loaded and will accept a wheel of up to 76mm (3ins) diameter.

We all know the Mobius as the go-anywhere workhorse of action cameras, blazing the trail where other cameras fear to tread; but what do you do when the next mission looks tougher than usual?

Simple, stick your little buddy in a suit of armour with this tough, all alloy protective case!

Machined to allow easy access to all of the Mobius' many functions and maintaining a clear view from the lens, this case gives you peace of mind when you send your favourite action camera into the thick of it!

Features:
• Purpose made to fit the Mobius Action Camera
• Tough, all alloy design
• Access to all camera functions
• Bolt together case
• Lens shield

Specs:
Dimensions: 73 x 46 x 23mm
Weight: 40g

Quanum Exoskeleton for RunCam

Are you worried about your RunCam action camera not surviving a hard landing?  Simply give your RunCam a rigid exoskeleton frame.

Manufactured from super light weight alloy and machined to allow easy access to all of the RunCams many functions while maintaining a clear view from the lens, this frame gives you peace of mind when you send your favorite action camera into the thick of it!

Features:
• Purpose made to fit the RunCam Action Camera
• Tough, exoskeleton style design
• Superlight Alloy
• Access to all camera functions
• Bolt together case
• Lens shield

Specs:
Dimensions: 69 x 46 x 23mm
Weight: 21.5g

Especially made for FlySky FS-i10 and our Turnigy i10, this sun shade will enhance visibility of your LCD touch screen.

Simply peel and stick and fit directly around the screen area.  The shade collapses easily for storage/transport. 

Alloy Anti-Slip TX Control Sticks Short (M4 for JR TX - Purple) - 12mm long + locknut, Total: 24mm

Alloy Anti-Slip TX Control Sticks Long (M4 for JR TX - Purple) - Complete with Locknut, 29.5mm Long

Alloy Anti-Slip TX Control Sticks Short (M4 for JR TX) - 12mm long + locknut, Total: 24mm

Alloy Anti-Slip TX Control Sticks Long JR TX (M4 Thread - Red) - Complete with Locknut, 29.5mm Long

NTM 28 Motor Mount Spacer/Stand Off 2mm (4pc)

Motor Mount Spacer Stand Off 2mm (4pc)

Are you looking to convert your SK450 quadcopter into a flying dead cat? If so, we have just the thing! This kit allows you to convert your standard SK450 into the "Dead Cat" style configuration with or without (your choice) the mess and hassle of mounting your own dead feline to the frame.

In addition to flying your deceased family pet around at home or your favorite local flying site, this configuration is also ideal for aerial video/photography as the front arms offer an extra wide field of view. The integrated camera mount plate located at the front of the frame is perfect for mounting a GoPRO or similar sized camera.

This kit includes everything necessary to convert your SK450 quad frame into either a wicked camera rig or a morbid dead pet mobile, the choice is yours!

*Note: This is a conversion kit only, the arms and other components are not included, it requires the use of original SK450 frame parts to complete.

Specs:
Front arm width: 490mm
Rear arm width: 375mm
Weight: 460g (completed frame w/out electronics)

Includes:
Lower main frame plate
Upper main frame plate
All necessary hardware

10mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 10mm
Inner Corner to Corner: 16mm
Outer Corner to Corner: 46mm
Weight: 5grams

10mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 10mm
Inner Corner to Corner: 23mm
Outer Corner to Corner: 46mm
Weight: 7grams

11mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 11mm
Inner Corner to Corner: 19mm
Outer Corner to Corner: 53mm
Weight: 6grams

20mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 20mm
Inner Corner to Corner: 30mm
Outer Corner to Corner: 53mm
Weight: 6grams

5mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 5mm
Outer Corner to Corner: 53mm
Weight: 9grams

25mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 25mm
Inner Corner to Corner: 33mm
Outer Corner to Corner: 53mm
Weight: 10grams

22mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 22mm
Inner Corner to Corner: 32mm
Outer Corner to Corner: 53mm
Weight: 8grams

16mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 16mm
Inner Corner to Corner: 25mm
Outer Corner to Corner: 53mm
Weight: 7grams

22mm Shaft Universal Tri Motor Mount

Spec:
Shaft Size: 22mm
Inner Corner to Corner: 40mm
Outer Corner to Corner: 53mm
Weight: 11grams

30mm Shaft Universal Motor Mount

Spec:
Shaft Size: 30mm
Dimension: 78x60mm
Inner Corner to Corner: 61mm
Weight: 26grams

35mm Shaft Universal Circular Motor Mount

Spec:
Shaft Size: 35mm
Dimension: 54mm
Inner Corner to Corner: 54mm
Weight: 10grams

40mm Shaft Universal Motor Mount

Spec:
Shaft Size: 40mm
Dimension: 62x62mm
Inner Corner to Corner: 50mm
Weight: 19grams

M3.5 x 90mm Stand-offs With Clearance

Spec.
Step One
 Depth: 5mm
 Lenght: 46mm
Step Two
 Depth: 3mm
 Lenght:30mm

M3.5 x 115mm Stand-offs With Clearance

Spec.
Step One
 Depth: 5mm
 Lenght: 70mm
Step Two
 Depth: 3mm
 Lenght:30mm

Universal Mount - M3.5 Fastener kit

Included:
M3.5x17mm Screw * 4
M3.5x12mm Screw * 4
10x4x2mm Washer * 4
10x4x1mm Washer * 4

Alloy Anti-Slip TX Control Sticks Short (M3 for Futaba TX - Blue) - 12mm long + locknut, Total: 24mm

5.6mm x 18mm M3 Nylon Tapped Spacer (10pc).

Perfect for mounting Multi-rotor control boards.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Turnigy 9XR FPV Monitor Mounting Arm.

A mounting arm specially designed to hold Telemetry units or FPV Monitors on
top of your 9XR.
Compatible with most standard FPV monitors and our Quanum Telemetry system.

*Requires the 9XR Transmitter Stand (see related items)

3x30P Pin Socket - 2.54mm Pitch (5pcs/bag)

Perfect for DIY electronics projects.