Civilian and Fun Flyer

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

Improving on the Bixler 2, this latest model is the perfect RC trainer plane, the perfect RC glider, and the perfect beginner FPV plane. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 PNF Plane is a plug-and-fly model requiring a radio system and battery.

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. Well known for stability, the Bixler is also an excellent choice for an inexpensive FPV platform and perfect for those lazy Sunday afternoons.

This version of the Bixler 1.1 is not supplied with a motor, ESC, servos, or RC equipment, it allows you to choose yourself the components you wish to use. Whatever you are looking for, the Bixler 1.1 has it covered.

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. The Bixler 1.1 is made of super-tough EPO foam with all the electrical components pre-installed. The aircraft can be assembled in 15 minutes and flown as soon as the glue dries.

Following on from the incredible success of the first H-King Paramotor comes this V2. This version sports a new, much more efficient, stable, parafoil wing in a vibrant color scheme. This makes it much easier to launch and fly and adds loads more stability when flying than the previous version. It will even perform take-offs from the ground with assistance from a helper, and long, long, touch and goes are performed with ease. Another improvement is the lines that attach the gondola to the parafoil, these are stronger and much smoother, so they are less likely to bind to each other when launching. Next on the list of new features are clear servo arms for added realism, a super bright LED light bar, and a white prop. This light bar illuminates the underneath of the sail and reflects off the white prop allowing you to have even more fun with your paramotor by enabling you to carry on flying into the twilight zone.

The AVIOS Albatross HU-16 is a beautiful twin-engine flying boat with a large monohull, and wing floats, the entire underneath of the front portion of the hull is reinforced with plastic. This allows it to happily take the knocks and bangs of using a grass airfield to fly from, but as mentioned before, it really does come into its own when operating from your favorite lake or waterway. Taxi-ing, and lining up for take-off are made all that much easier with the water rudder and the supplied Aerostar forward/reverse water-resistant ESCs. Built-in flaps provide plenty of lift and make the landings and take-offs that much easier and extremely scale-like.

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

The HobbyKing® ™ Walrus is a very capable, fun model that appeals to both new and experienced pilots alike. Easy to fly and easy to build, the Walrus is great value for money!

Made from tough EPO foam, the Walrus is simple to assemble, the colourful decals are pre-applied, and the brushless outrunner motor, ESC, and all servos are pre-installed, even the folding prop and spinner have been factory fitted! As well as being easy to assemble, the Walrus is very practical and features a stiff, CF-reinforced 2pc Plug-in-wing and a large canopy area that allows you to fit a wide range of lipoly packs. Its somewhat portly proportions also make the Walrus super easy to hand-launch. The great-looking scheme is perfect for orientation, and its appealing size gives the Walrus plenty of presence, as well as the ability to handle a little wind.

The Walrus is an extremely stable RC plane for the new flyer to the seasoned pro. Now you can light up the sky and enjoy the fun of night flying. LED super bright lights will light up your nightlife!

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 1600 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 2000 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

The H-King Crusader 30E is based on the classic stick design. This electric RC plane can be flown by both beginners and experts. It is constructed from lightweight ply and balsa that is painted with a high contrast color scheme. The Crusader will stand out on the ground and in the air at your local hobby club.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

The Durafly SlowPoke is an EPO foam model of the classic balsa design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of local fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking plane.

This great-looking little racer can trace its lineage back to the very popular Rare Bear which we sold a few years ago. This was a very fast parkflyer based on the Reno Racers that was amazing fun to fly, was very tough and it became a firm favorite extremely quickly.

The Phoenix 2400 is the largest glider in the Phoenix range. It comes with an almost indestructible ABS plastic hull and strong EPO foam wings and tail section. With its smooth, stiff hull, the Phoenix is ​​durable for a lifetime and yet light enough for the glider to work without any problems. An additional canopy with camera mount is included. Once you have your camera installed, you can either enjoy FPV flying or just take pictures of your flights.