All Planes

The Tundra has firmly established itself in the RC community and has now become the go-to model for most RC pilots. From intermediate pilots to the more experienced flier this electric RC plane will do it all. The Tundra is an extremely versatile RC airplane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all round toughness.

The Tundra has firmly established itself in the RC community and has now become the go-to electric RC plane for most RC pilots. From intermediate pilots to the more experienced flier this quality-built RC foam plane will do it all. The Tundra is an extremely versatile plane that is great fun to fly and is highly entertaining for all pilots with its excellent aerobatic potential, STOL flying ability, and all-round toughness.

The Tundra has had a massive cult following over the years within the RC community as it's easily one of the best flying electric RC planes on the market with an impressive flight envelope. This was followed sometime later with the launch of the Grand Tundra which encompassed all your favorite features but on a larger scale. The Grand Tundra Plus keeps 99% of the features of the original version, the one change that has been made is to the wing servo connectors, these have a new design to give a stronger and more reliable connection.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

This great-looking and superb flying AVIOS KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.

The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the AVIOS team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

The HobbyKing™ Paramotor is extremely easy to fly due to its very gentle and stable flight characteristics yet once you are used to it, it will perform loops and rolls with ease. Due to the design, the huge high-performance 2250mm sail opens quickly for easy launching and it will retain its shape even in turbulence. The single skin durable sail is made from 100% ripstop fabric and comes pre-rigged with tough nylon chords that are ready to attach to the durable aluminum gondola.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The H-King Viper 64 is affordable, very stable, and has predictable handling qualities, making it the ideal choice for your first venture into flying EDF jets. It has stunning looks, and the performance on its 6S set-up gives it a fantastic turn of speed and the ability to perform big, jet-style maneuvers, this makes it also the perfect sports jet for the more experienced RC pilot. The H-King Viper 64 is based on a small two-seater homebuilt jet airplane designed by the Viper Aircraft Corporation in the States during the late 1990s.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.