Aircraft

FP100 Helicopter Tail Fin

Pioneer 1020mm - Replacement Horizontal Stabilizer

La Belle Dame 1180mm - Propeller Nuts

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

The Quad plate has 4 10x10mm slots for motor arms and 45x45mm posts for flight controller mounting. The center plate as other provisions for mounting other Bits and holes at 10mm intervals.

Specs:
Size: 100x100mm
Weight: 77g
Color: Green

The all-new Multistar twin output SBEC is an advanced switching DC-DC regulator designed specifically with multirotors in mind. It will simultaneously supply a constant 5Amps at 5V and 10Amps at 12V.

It works with 2-13 cell LiPo packs and supplies an interference-free constant 5V to your receiver and 12v to a gimbal, camera, or any other 12V accessory.

Always check the input voltage of any accessory before connecting the SBEC supply to it.
 
Specs:
Type: Switching
Input Protection: Reverse polarity protection
Output (Constant): 5v/5A and 12v/10A
Input: 6v-50v (2-13 cell LiPo) 
Dimensions: 60 x 25 x 17mm
Weight: 42g

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

RotorBits Anodized Aluminum Construction Profile 250mm (Gray)

Specs:
Size (LxW): 250 x 10mm
Weight: 28g
Color: Gray

Just because you may have outgrown your Legos and Erector sets does not mean the fun has to stop. Introducing RotorBits, the modular construction set of endless possibilities. Based on the idea of standardized connections and dimensions, the only limit to what can be built is your imagination.

RotorBits can be recycled and reused into other creations, mix and matching different bits to make a Y6 or Bi-Rotor! As your collection of Bits grows and concepts evolve with plug & play easy, who knows what you can come up with? Have club competitions for creative ideas or races for fastest box to air builds. RotorBits is one idea that can never be outdated only reconfigured.

Composite fixture plate for mounting, bracing or assembly based on the standard 10mm hole spacing of RotorBits. 

Specs:
Size: 56x56mm
Thickness: 1.5mm
Angles: 90deg cross
Weight: 7.5g
Color: Black mate
Hole size: M2.5
Hole spacing: 10mm (RotorBits standardized)
Bag of two

R/C Helicopter Pitch Gauge, a must for when setting up your RC helicopter.

Specs:
Range: +12°, -12°
Material: Plastic
Suits: Most mini-helicopters

These new upswept upgrade arms provide improved stability and faster forward flight. The arms are manufactured from toughened plastic which provides added strength.  

The arms are designed to fit DJI Flamewheel style multirotor frames such as the V500 / H550 Frames

Specs:
Length: 210mm
Weight: 62g (per arm)
Color: White

Main Gear - Walkera V120D02S 3D Mini Helicopter

HM-V120D02S-Z-10

This amazing micro helicopter is packed with features to make it fun and easy to fly. The flybarless system is controlled and stabilized using a 6-axis gyro system which gives it a stability rarely seen before in a small RC helicopter. The K200 also has a barometric pressure sensor for altitude hold and an optical sensor for position hold. This coupled with the 6-axis gyro, makes it the perfect choice for the novice pilot.

The XK K110S CP micro helicopter with collective pitch and a brushless motor is the perfect choice for those pilots who want to progress on the exciting journey of learning to fly RC helicopters. Being an upgraded version of the popular K110, the K110S is very capable of performing advanced aerobatics and 3D flight, but it is also equally at home flying as a stable intermediate training platform. The XK K110S is stabilized using a state-of-the-art gyro system that has the ability to be switched from 6-axis for super stable flight, to 3-axis for aerobatic and wild 3D flight. A very handy feature when you have the 6-axis gyro selected is "Hover Mode", at the flick of a switch on the transmitter the K110S will sit in a stable hover without any inputs from you on the control sticks.

The XK K100 6ch CP palm-size helicopter with collective pitch is the perfect choice for those pilots who want to progress on their journey of learning to fly RC helicopters. The K100 CP is very capable of performing advanced aerobatics and 3D flight, but it is also equally at home flying as a stable intermediate training platform. Using a state-of-the-art switchable gyro stabilization system, it has the ability to be switched from 6-axis for super stable flight, to 3-axis for aerobatics and wild 3D flight. Also, when you select the 6-axis gyro system, you can select "Hover Mode", at the flick of a switch on the transmitter the K100 will sit in a stable hover without any inputs from you on the control sticks.

The GOOSKY Legend S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. It boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique "cage body" metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.

The GOOSKY Legend S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. It boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique "cage body" metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.

The GOOSKY Legend S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. It boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique "cage body" metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.

The GOOSKY Legend S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. It boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique "cage body" metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.

The GOOSKY Legend S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. It boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique "cage body" metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.

The GOOSKY Legend S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. It boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique "cage body" metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.

The GOOSKY Legend S1 is a small, game-changing, high-performance, aerobatic helicopter that incorporates all the latest in cutting-edge design and technology to bring unmatched flying fun and excitement. It boasts a whole host of features including dual direct drive powerful brushless motors (one main, one tail), a compact GTS control system with Bluetooth mobile phone APP for parameter adjustments, a unique "cage body" metal geared servo system, highly efficient low noise rotor blades, and quick and easy battery changing. Every detail reflects the ingenuity of the designers in producing a tough, easy-to-fly, maintenance-free, high-performance helicopter suitable for entry-level and experienced pilots alike.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

Introducing our EPP 3D MX2. Featuring a fantastic design and layout, this all out EPP 3D'er will satisfy the most eager 3D pilots!

Its fuselage is torsionally very stiff yet light with loads of space beneath the long top hatch for your radio and power system. The wing is a one-piece affair featuring EPP construction, a very accurate symmetrical airfoil with 2 additional spars to minimize flex and twist. The control surfaces are something else - the elevator, rudder, and ailerons feature a 3 layer construction (Epp-Depron-EPP) making for stiff surfaces and NO flex at extreme throws! Snap rolls "Snap" and the control response is instantaneous.

The light - yet rigid - airframe adds up to one great flying 3D "foamy". Waterfalls, harriers, flat spins, rolling circles this model has the precision to perform these and any other moves you can think of!

Assembly of the airframe in a quick 10-15 minute process with the help of a little medium CA. The radio and power system layouts are very straightforward, the long top hatch making for easy access.

This is a great model for general park flying and hardcore 3D. You will be hard-pressed to break this model, it will take hard knocks and just keep bouncing back every time!


Features:
• Tough EPP material, light-weight, and crash-resistant
• Stiff EPP/Depron composite control surfaces
• Revolutionary design adds to the structural integrity and the rigidity of the airframe
• Light-weight provides optimal wing loading
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation
• The stand out color scheme great for orientation


Specs:
Wingspan: 955mm
Length: 945mm
Wing Area: 15.2dm2
Weight: 550g (without battery)



Requires:
4 channel radio system
2217 950-1100KV Brushless outrunner 
30Amp ESC 
3S 11.1V 1100-1300MAH Li-Po 
10x4.7/11x4.7 propeller 
4 x 9g servos

This little kit takes around 4hrs to build and will satisfy the throttle jocky in all of us!

The flycat comes with 56mm EDF and you will need a 25A ESC & 4800kv inrunner.

This plane is extremely fast, (over 100mph!), however still stable at slow flight.

Spec.
WingSpan: 640mm
Length: 800mm
Weight: 290g
BESC : 25A (not included)
Motor: 4800kv 20-30 size Inrunner (not included)
Lipoly: 1300mAh 11.1v 20C (not included)

Required.
Motor & ESC
3 x 9g Servo
5 or 10min Epoxy (Araldite)
1 x Servo Y lead
1 x Servo Extention lead
12AWG Silicon wire (20cm For motor to ESC)
1300mah 11.1v 20C lipo battery
Your own receiver and transmitter

Our flight report.

Kit fits together well, light sanding of leading and trailing edges required to remove extra foam. We chose to not strengthen the wing with CF tubing, which didnt prove to be an issue, even at full speed high G turns.

We opted to mount the BESC being the battery area, in case the battery needed to be moved forward to adjust CofG, however this wasnt necessary.

EDF was mounted on the stick mount. Stick mount was shortened, with the extra piece used to raise the EDF off the stick to clear the EDF shroud. 2 bolts held the fan unit to the stick, one before and one after the fan blades.

First flight.

We kept CofG 9.5cm from the apex of the wings leading edge. The flycat was hand launched at 3/4 throttle, accelerating quickly. To our surprise, no trimming was required.

The flycat is an extremely fast kit to fly, and required a lot of elevator in turns. We suggest putting the elevator on maximum throws. It needs HUGE amounts of elevator during turns!

Overall an excellent plane which flys smoothly, even on windy days.

We suggest a good lipo pack, as this little hotty will chew through a 1500mAh in only 5 minutes. We used the ZIPPY-R 1800mAh 22C 3S1P pack for around 8 minute flights. As compared to the ZIPPY-Q pack which brought us short at about 7 minutes.

Are you ready to be the Red Baron of your local park?  Well with the fantastic Von Stik you can be a flying ace in minutes.   

A great slow stick design, the Von Stik has been made to be a super light, fly anywhere model, with a powerful geared motor running off  a 1S 3.7V 400mAh lipoly battery.  

Supplied with its own 2.4Ghz radio for interference free flying, easy to assemble and finished in a striking Red Baron finish, with the Von Stik you will be making diving attacks and strafing runs in no time at all.

It's easy to fly with its basic rudder and elevator control system and is very forgiving for the novice pilot.  In fact, the Von Stik makes for a perfect first model for any young person or even for the experienced pilot who is looking for a totally fun-fly aircraft that can be thrown up in a local park without any fuss.

Features:
• 2.4Gh radio system
• Light weight
• Easy to assemble
• Rudder/Elevator model
• Perfect for beginners 
• Beautiful bold "Red Baron" finish

Specs:
Wingspan: 52cm
Length: 38cm
RC System: 2.4Ghz
Propeller: 6050 (slowfly)
Weight: 75g
Battery Required: 1S 3.7V 350-400mAh Lipoly
Control Distance: 150m 
Mode: 2

Soaring the sky and hunting thermals is what this RC ASW28 electric sailplane made with EPO carbon-reinforced wings and blown plastic fuselage is designed to do. The huge wingspan and plug and fly design make this glider a must-have for all RC glider flyers.

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The 550mm XK A300 Beechcraft D17S is manufactured to very high standards in tough EPP foam. It is supplied ready to fly (RTF) complete with a Mode 1-2 switchable 2.4GHz 4 channel RC system, a switchable 6-axis gyro, a powerful, efficient brushless motor with ESC, 2 servos, on-board LED lights, 7.4V 600mAh battery, and a USB charging cable. Assembly is very easy and straightforward, all the necessary parts and tools are supplied to get your Staggerwing ready to fly in less than an hour, you just need to supply 6 x "AA" batteries for the transmitter.

Looking to make your video platform ultra-smooth? This is the ultimate in smooth high pole count purpose built brushless gimbal motors.

The 2804 motor comes with flush mounting so any DIY to PRO projects are simple and straight forward, it also comes with the standard female connector pre-installed, So wiring is as simple as plugging it in. It’s a perfect match to our Brushless Gimbal Stabilization Board and IMU.

The 2804 is the perfect size for cameras around 100-300 grams (GoPro style).

Spec:
Poles: 12N14P
KV(RPM/V): 210
Resistance: 10.4omh
Weight: 35g
Wire: 0.19mm
Torque: 240g
Bottom holes center to center: 16mm and 19mm
Top holes center to center: 12mm

Durafly Auto-G2 Gyrocopter 821mm - Replacement Battery Hatch