Aircraft

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement hatch cover with a golden canopy for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement 3108-1070KV brushless motor for the H-King Reno Aces P-51 "Galloping Ghost", this is the standard motor that is supplied with the PNF model.

A replacement 8x6 propeller for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of nacelle protection skid plates for the series of H-King Avro Lancasters, these will fit versions 1, 2, and 3.

This version of the Yak-11 is based on a full-size that currently flies in Germany, the color scheme honors the French units that flew for the Russians in WW2. As mentioned above, being the warbird version it is supplied with a power train that has been developed for more torque. Using a 6S LiPo pack, the powerful and reliable H-King power system gives top speeds approaching 100mph, and the vertical performance has to be seen to be believed.  Big, scale warbird maneuvers are a dream to fly with the amount of torque and power available, and the rolling maneuvers are very axial. Impress the on-lookers with slow scale-like flypasts with flaps and the wheels down, or fast, low strafing runs and pulling up into a half Cuban eight or a similar maneuver. The Yak-11 in this commemorative color scheme looks fantastic from all angles when flying or when sitting on the ground.

Want even more speed and power for your H-King Reno Aces Racer? Then upgrade to this optional high-power Pro 3108-1160KV brushless and turn it into a ballistic missile with unlimited vertical performance. There is no need to change the supplied propeller or ESC, both are fine with this upgrade.

This H-King version of this very impressive F-16 Fighting Falcon is manufactured in EPO foam and is beautifully finished in an authentic USAF color scheme with the decals pre-applied at the factory. The H-King F-16 has outstanding flight characteristics in its own right, it flies like it is on rails, but the pre-installed ORX 6-axis gyro takes this to another level. Pilots of all levels of experience will benefit from using the intermediate gyro setting, this really does improve stability and smoothes out the flight, especially in windy conditions. For beginners and low hours pilots, the flight stabilization system makes it even easier to fly. It utilizes a 32bit MCU for ultra-fast control response and has 3 settings, gyro off, gyro on, and training mode. In the training mode, the gyro gives full stability and also limits the amount of roll and pitch that can be used. In gyro-on mode, this gives slightly less aided stability and does not limit the roll or pitch that can be used, perfect for smooth, jet-style aerobatics. In gyro off mode, it is exactly that, no gyro at all.

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted vertical stabilizer for the Durafly Me-163B V2 "White 10" with rudder, and decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted cowl for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted take-off dolly with wheels for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement spinner for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement set of decals for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement aerial, and pitot head tube for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement accessory set for the Durafly Me-163B V2 "White 10". Includes, hex-wrench, pushrods, snap links, control horns, and control horn mounting screws.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

A replacement canopy/battery hatch for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement pair of wings for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement set of tailbooms for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement horizontal stabilizer with elevator for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement fuselage with nosewheel fairing for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

The Volantex RC 4-channel P-51D Mustang is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.

The Volantex RC 4-channel Messerschmitt Bf 109 is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.