Aircraft

Durafly® ™ EFXtra - 3536-1780KV Replacement Aerostar Motor w/Mount and Propeller Shaft

Durafly® ™ EFXtra - Replacement Fuselage (Green). 

Note: Fuselage comes without cowl and battery hatch.

Durafly® ™ EFXtra - Replacement Main Wing

Durafly® ™ EFXtra - Replacement Battery Hatch (Red)

Durafly® ™ EFXtra - Sticker Set (Red)

If you’re craving speed, the EFXtra is where it’s at, with out of the box performance in excess of 100mph+. Durafly retained the spirit of the EFX Racer and focused on adding extra performance, like the incredible roll and climb rates.

There are plenty of high-performance features and new additions over the EFX Racer. The Durafly EFXtra boasts a new clipped wing (975mm) to give extreme roll rates. An upgraded 3536-1780kv brushless motor (using ultra-high-speed Japanese bearings) with a 60A Aerostar ESC has been added and optimized, for up to 4S performance. Higher speed, higher torque digital 9g servos (metal geared on the ailerons) together with ball link connectors provide true precision control of all surfaces no matter what speed you are traveling. We’ve even included FPV mount in the box for the Adeline junkies that love to live life on the edge.

Durafly® ™ EFXtra - Propeller Shaft 6mm

Designed to fit on the Aerostar 3536-1780KV motor for the EFXtra Metal Spinner.

Durafly® ™ EFXtra - X Mount for Motor

HobbyKing® ™ Walrus - Spare Part - Canopy

These super stiff glass nylon reinforced propellers will give your multirotor that extra punch. This is done by reducing the flex that is normally associated with the thinner ABS style propellers.

Gemfan propellers have set the gold standard in electric aircraft/multirotor props. Known for their durability, great balancing and superb hub centering and all that at an inexpensive price. Includes various adapters to suit shafts 3mm upwards, there is enough room on the hub to allow it to be reamed out to 8mm.

Specs:
Size: 1045 (10x4.5)
Color: Blue
Hub: 6mm (adapters included for 3mm, 3.17mm, 4mm, 5mm, 6mm, and 8mm)
Material: Glass-reinforced nylon
Rotation: 1 x CW and 1 x CCW
Weight: 15.7g each

Included:
1 x CW rotation propeller
1 x CCW rotation propeller
2 x Propeller adapters

This latest addition to the XT60 range provides an integrated mount on the side of the XT60 with a 5mm mounting hole. This can be used to fix it to a drone frame (via a cable tie) or can be mounted to a frame stand-off. It could also be mounted to a battery tray in a plane or boat.

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

We have included a collet-style adapter, as well as a bolt-on prop adapter.

HobbyKing® ™ Walrus - Spare Part - Vertical Fin and Rudder

Gemfan Propellers have set the gold standard in the small class multirotor community. These 3 hole T style 2 bladed propellers supply an excellent amount of thrust and a smooth flight through all throttle ranges for that locked in feel perfect for your 100 to 150 size quads.

Known for their durability, great balancing and superb hub centering and expendable price. They come packaged as a set of 2 pairs, with 2 CW and 2 CCW.

These Polycarbonate blades are stronger and less prone to breaking if you clip a gate or a tree so you have a better chance of finishing your race or joy flight.

Specs:
Size: 3025 (3x2.5)
Blades: 2
Type: Multirotor
Profile: Bullnose
Color: Black
Hub: 3 hole T style
Material: Polycarbonate (PC)
Weight: 1.1g

Includes:
2 x CW rotation
2 x CCW rotation

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

Performance Data (3S):
8x6: 309W, 29A, 1425g static thrust
9x4.7: 361W, 34A, 1506g static thrust
8x8: 376W, 36A, 1773g static thrust

Performance Data (4S):
7x5: 393W, 28A, 1511g static thrust
7x6: 449W, 32A, 1754g static thrust
8x4.1: 500W, 36A, 1733g static thrust

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

We have included a collet-style adapter, as well as a bolt-on prop adapter.

The H11WH is designed with beginners in mind and features a 6 axis gyro and a headless mode function, making this little quadcopter unbelievably stable and great for developing your flying skills. With stability and control are taken care of, you can concentrate on exploring and recording the footage at your favorite sites. 

It not only looks cool, but it is also equipped with a 2.4GHz WiFi operated 720p HD camera that can take stills or video at the press of a button, either on the transmitter or on your own mobile device! Using Wifi the H11WH turns your mobile device into an FPV monitor allowing you to see the live camera feed directly "from the pilot seat". 

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

We have included a collet-style adapter, as well as a bolt-on prop adapter.

Performance Data (3S):
4.75x4.75: 322W, 31A, 1124g static thrust
5x7.5: 492W, 49A, 1770g static thrust
6x4: 522W, 53A, 1583g static thrust

Performance Data (4S):
4.5x4.1: 520W, 38A, 1447g static thrust
4.75x4.75: 657W, 49A, 1819g static thrust
5x4.1: 681W, 51A, 1804g static thrust

These super stiff glass nylon reinforced propellers will give your multimotors that extra punch. This is done by reducing the flex that is normally associated with the thinner ABS style propellers.

Gemfan propellers have set the gold standard in electric aircraft/multirotor props. Known for their durability, great balancing and superb hub centering and all that at an inexpensive price. Includes various adapters to suit shafts 3mm upwards, there is enough room on the hub to allow it to be reamed out to 8mm.

Specs:
Size: 1045 (10x4.5)
Color: White
Hub: 6mm (adapters included for 3mm, 3.17mm, 4mm, 5mm, 6mm, and 8mm)
Material: Glass-reinforced nylon
Rotation: 1 x CW and 1 x CCW
Weight: 15.7g each

Included:
1 x CW rotation propeller
1 x CCW rotation propeller
2 x Propeller adapters

HobbyKing® ™ Walrus - Spare Part - Horizontal Stabiliser

HobbyKing® ™ Night Walrus - Spare Part - Fuselage

HobbyKing® ™ Walrus - Spare Part - Wing Spar

Specs:
Length: 300mm
Diameter: 5.5mm (7.8mm in the middle)

The FQ777-126 is the ultimate FPV hexacopter drone. This hexacopter drone is small and light enough to fit literally anywhere! In fact, it is so small it even fits and charges within a special compartment within the Transmitter making it small enough to fit into your pocket.

Not only does the Tx double up as a handy storage compartment, but it also charges the LiPo battery whilst on the move. The Spider mini hexacopter FQ777-126 drone is fitted with a 6 axis gyro making it stable and easy to fly indoors or outdoors when recording on your mini HD camera.

Gemfan Propellers have set the gold standard in the small class multirotor community. These 3 bladed propellers supply an excellent amount of thrust and a smooth flight through all throttle ranges for that locked in feel perfect for your 100 to 150 size quads.
Known for their durability, great balancing and superb hub centering and expendable price. They come packaged as a set of 2, with one CW and one CCW.
These Polycarbonate blades are stronger and less prone to breaking if you clip a gate or a tree so you have a better chance of finishing your race or joy flight.

Specs:
Size: 3035 (3x3.5)
Blades: 3
Type: Multirotor
Profile: Bullnose
Color: Orange
Hub: 5mm
Material: Polycarbonate (PC)
Weight: 1.2g

Includes:
2 x CW rotation
2 x CCW rotation

HobbyKing® ™ Walrus - Spare Part - Main Wing w/ Sticker Set

Soaring the sky and hunting thermals is what this RC ASW28 electric sailplane made with EPO carbon-reinforced wings and blown plastic fuselage is designed to do. The huge wingspan and plug and fly design make this glider a must-have for all RC glider flyers.

GEPRC have changed the classic “X” frame design and have come up with a new design idea with a long dual deck built over the “X” arms. The GEP-VX5 is 215mm wheelbase FPV Drone which is designed for 5” propellers. 

The individual 4mm carbon fiber arms have a CNC machined bracket to add additional strength when mounting the arms to the 2mm carbon fiber lower deck. This allows individual arms to be easily replaced if damaged. The upper deck is also of 2mm carbon fiber and joined to the lower deck with eight custom 35mm aluminum columns. Up front, there is an adjustable (0~55deg) FPV camera mount to aid in getting the correct viewing angle. At the back, there is a 10 LED panel that can be either run via the flight controller or stand-alone. GEPRC have also provided a new style PDB (with BEC, 5V 3A output, 12V 500mA output) with an XT60 connector which helps remove some of the cable clutter.

Just connect up your favorite Flight Controller, 20~30A ESCs and 2204~2305 motors powered by 3S~4S 1300mAh to get you moving. 

Add your FPV gear and you’ll be racing in no time.

Our model captures the true spirit of the early WW1 Fokker Eindekker, It has an open framework structure built from quality balsa and hardwoods, a fiberglass cowl and plastic engine covers, a dummy rotary engine, and of course the machine gun. For ease of construction, all the parts are beautifully laser cut and are extremely accurate which will allow you to build the perfect model. To complete the contents of this superb kit are a pair of vintage aircraft wheels, pre-bent and drilled aluminum wing struts and U/C legs, carbon tube wing spars, and joiners plus a comprehensive hardware pack that includes rigging wire, nuts, and bolts, servo horns, rods, and connectors, etc.

Durafly® ™  Tundra - Main Wing Set w/Control Horns (Blue/Red)

Durafly® ™ Tundra - Foam Canopy / Battery Hatch w/Magnet (Purple/Gold)

Durafly® ™ Tundra - Foam Canopy / Battery Hatch w/Magnet (Blue/Red)

Durafly® ™ Tundra - Decal Set (Orange/Grey)

Durafly® ™ Tundra - Decal Set (Blue/Red)

When drone racing you need a streamlined, clean set up, fewer wires and a compact power supply. RJX have released a power supply board and an F3/F3 Evo flight controller together in a stackable bolt and plug in combo.