Aircraft

This version of the popular Piper J-3 Cub is in a striking new Swiss color scheme which is a must for all scale pilots. This color scheme uses a lot less paint so there is a bit of a saving in weight which further reduces the already low wing loading. The attention to detail makes it an extremely realistic model, and it comes with a nice, generous size 1400mm wingspan. Like all Cub's with its large wingspan, and stable flying characteristics it is very easy to fly, perfect for low-hour pilots and experts alike. The Swiss Cub also has a new all-metal landing gear which is virtually indestructible, this will survive the hardest of landings. Further weight saving has been achieved by the removal of the metal tail bracing wires, these have been replaced with scale-looking, easy to fit, lightweight elasticated white shock chord.

The Durafly EFX Racer has been designed from the ground up to offer the speed (100mph+) and strength normally reserved only for high end full composite models, but with the handling and satisfaction, only a Durafly model can offer.

HobbyKing Bixler 2 EPO 1500mm - Replacement Fuselage (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Main Wing (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Vertical Fin (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Decals (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Canopy

HobbyKing Bixler 2 EPO 1500mm - Replacement Stabilizer (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Wing (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Horizontal Stabilizer (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Vertical Fin (Blue/Red)

H-King Bixler 3 Glider 1550mm - Replacement Sport Canopy

H-King Bixler 3 Glider 1550mm - Replacement Decal Set (Blue/Red)

The Durafly SlowPoke is an EPO foam model of the classic balsa design. Adding to the easy flying design of the SlowPoke, Durafly has added some larger wheels to make it even easier to take off and land on a wide variety of local fields. A great plane for your first low wing tail dragger or for the discerning experienced pilot wanting a great looking plane.

The Bixler 1.1 is a proven platform for beginners right through to intermediate pilots. The Bixler 1.1 is made of super-tough EPO foam with all the electrical components pre-installed. The aircraft can be assembled in 15 minutes and flown as soon as the glue dries.

The H-King MX2 Extreme 30E is perfect to take a pilot from general sport flying to confidently flying 3D aerobatics. It is lightweight, has a powerful brushless motor set-up, and features large control surfaces that make it great for lively tumbling and extreme, spirited types of flying. Things such as hovering, waterfalls, harriers, knife-edge, rolling circles, and other extreme 3D aerobatics are made much easier when flying the MX2 Extreme.

The H-King A-1 Skyraider PNF is a realistic flying model of the original plane. It is made of strong EPO foam and is electric-powered which makes it ideal as a park flier. There is a built-in Gyro (or Flight Stabilizer) to make flying this plane even easier.

Welcome to the ultimate scale experience. The Avios Spitfire Mk5 has been built using super scale, a new modelling technique that allows for incredible detail. Featuring more artistry than the 1100mm Spitfire, the larger model has visible panel lines, exhaust, cannons, and scale split flaps with turn indicators for added realism.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

This great-looking and superb flying AVIOS KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. The simplistic, yet striking color scheme depicts the type of paint jobs commonly used on civilian propliners.

The KingTwin 1700 is packed full of cool features including LED lights, retracts, and split flaps. The powertrain of 2 x Aerostar 3748-820KV brushless outrunners with Aerostar 40A ESCs was chosen by the AVIOS team after careful testing. This combination of motors, ESCs, contra-rotating props, and a 4S LiPo battery proved to be the optimum setup for power and duration.

The Wargo Signature Edge 540T 3D is yet another incredible airplane in the series inspired by the renowned 3D pilot Michael Wargo. The Edge 540T was specifically designed for very precise 3D flying and aerobatic training. Michael Wargo, our team pilot, and 3D expert, wanted a foam aircraft that was stiffer, and lighter than other foamies. This was achieved by the combination of a stiff, lightweight balsa frame covered with lightweight, crash-resistant EPP foam.

The H-King P51 "Galloping Ghost" is the first in a new mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The P-51 "Galloping Ghost" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mah 4S lipo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace a really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

The H-King FG-1 Corsair "Lucky Gallon" is the third in the mini-series from H-King, the "Reno Aces", WW2 fighters dressed to impress at the air races. The FG-1 Corsair "Lucky Gallon" with the included stock 3108-1070KV brushless motor offers a really quick model straight out of the box with speeds approaching 100mph when using the recommended 2200mAh 4S LiPo. However, if you are an experienced hand and are looking for 100+ mph speeds then there is the optional drop-in fit 3108-1170KV 'Pro' brushless motor. This will give your great-looking Reno Ace really ballistic performance on the same prop, ESC, and 4S battery for those that can handle the extra rotational torque on launch.

This version of the Yak-11 is the Red Reno Racer, this is not a totally scale color scheme, but is loosely based on the Strega P-51 Reno Mustang. As mentioned above, being the racer version it is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 95A ESC and 16x6 prop will give the Yak-11 an incredible turn of speed in excess of 100mph. It is quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform with the Yak, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

This version of the Yak-11 is based on a full-size that currently flies in Germany, the color scheme honors the French units that flew for the Russians in WW2. As mentioned above, being the warbird version it is supplied with a power train that has been developed for more torque. Using a 6S LiPo pack, the powerful and reliable H-King power system gives top speeds approaching 100mph, and the vertical performance has to be seen to be believed.  Big, scale warbird maneuvers are a dream to fly with the amount of torque and power available, and the rolling maneuvers are very axial. Impress the on-lookers with slow scale-like flypasts with flaps and the wheels down, or fast, low strafing runs and pulling up into a half Cuban eight or a similar maneuver. The Yak-11 in this commemorative color scheme looks fantastic from all angles when flying or when sitting on the ground.

This great-looking and superb flying Avios KingTwin 1700 sports/scale model is based on a small twin-turboprop and is very reminiscent of the type used by the military or civilian charter airlines around the world. With so many fantastic color schemes available for this type of airplane, Avios have decided to produce a plain white version. This plain white finish provides the perfect blank canvas for you to produce a completely unique, and bespoke color scheme of your own choice.

The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.

After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of the Dassault/Dornier Alpha Jet, this version is in the color scheme of the famous Patrouille de France aerobatic team. It is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in the classic Patrouille de France color scheme.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.