Robotics

One of a series of four DIY robot car kits, these are great value and great fun for kids of all ages to put together.

You will only need some basic tools, some solder and a soldering iron and within a few hours you will have an operating robot car.

This model is an obstacle avoider, with a sensor that detects objects to its front. 

Includes:
1 x Obstacle avoiding robot car kit 

Note: This robot does not require programming.

Make use of that free wind power electricity!

For use with the EK5100 Wind Turbine kit is this versatile charging unit.

Simply connect it up to your wind turbine and it can be used to charge your mobile phone, your ipod or your rechargable batteries. 

Includes:
Ek5400 Charger
Leads and cables

Make light and music with that free wind power electricity!

For use with the EK5100 Wind Turbine kit is this melody and light board.

Simply connect it up to your wind turbine and it can be used to power the sound and light board in various modes.

Includes:
Ek5300 Board
Instructions

The brain of your robot or IoT device, the EZ-B V4 powers over 10,000 robots worldwide and will give your robot project features inspired by science fiction!

With the electronics protected by a stylish plastic shell, the ez-bv4 clips into your ezrobot Revolution chassis or custom robot. It is easily controlled over Wi-Fi using ez-builder software.

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)

3x30P Pin Socket - 2.54mm Pitch (5pcs/bag)

Perfect for DIY electronics projects.

This high quality switch is made in Taiwan and is proven to exceed more than 10000 switch cycles during testing.
This switch is designed for life time use.

Great for repairing your radio or making a swtich for your own project.

Spec.:
Style: 2-Way, Round Head
Dimension(LxWxD): 13x8x7mm(Plastic part only)
Length: 29mm(Switch & Mounting hole)
Mounting Hole Size: M6x8mm
Weight: 3.7g(Each)

30P Pin Header and Socket - 2.54mm Pitch (5 pcs)

Perfect for DIY electronic projects.

The RoboStar SBRS-5314HTG robot servo is packed with features offering the very best for robot users. This rugged metal gear servo is perfect for your custom robot or other automation project. The plastic and metal alloy case dissapate heat and features threaded mounting holes for machine screws. The high power brushless motor provides ample moving power and precision for your project. This RoboStar servo can accept voltages as high as 11.1V, a 3S Lipo!

Each servo includes a removable input wire lead that plugs directly to the side of the case, as well as plastic and alloy servo wheels.

Features:
• High torque
• High precision, all metal gears, double bearing
• Good heat dissipation
• Rotation scope: 0~280°
• Accepts high voltages up to 3S 11.1V Lipoly
• Removable input lead for custom wire harnesses
• High power, super reliable brushless motor

Specs:
Output: Single
Operating Voltage: 7.4~11.1V (2~3S Lipoly)
Operating Speed: 0.18Sec/60° / 0.14Sec/60°
Stall Torque: 32.4kg.cm /53.1kg.cm
Rotation Scope: 0~280°
Size: 43X32X32.5mm
Weight: 81g
Spline: 25T
Ball Bearing: 2BB
Gear: Metal
Wire Length: 50cm
Bolt Pattern: 21.5x21.5mm
Operating Frequency: 1520us/333Hz, 900~2100us

Mounting screw is 3mm

2 position single pole latching panel mounted toggle switch that is perfect for on/off switching. Suitable for a voltage of 125~250V AC and up to a current of 5amps.

A high-quality double-sided tape that is perfect for securing servos, receivers, and many other items into your models. It is manufactured from shock-absorbing polyethylene foam with a strong acrylic adhesive applied to both sides, this PE foam is perfect for isolating sensitive electronic components from vibration. Other features of the tape are it is water-resistant, temperature resistant, and has UV protection.

Keep your Telemetry Radios safe! These cases are made out of slightly translucent ABS plastic, so you still can see TX/RX LEDs. They have a very tight fit and finish and are clearly labeled. These cases will make your setup look like Pro gear, while keeping them safe!

Designed to fit FPV Radio Telemetry Kit - 915Mhz/433MHz(#42846/42847,not included), But fits other brand Telemetry Radios as well.

Includes:
3M Foam Double-tape X1
Ground module Case X1
Air module Case X1