Accessories

A handy adapter to convert an XT60 equipped battery to an XT90 plug. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 12g(Each)

This is a great way to avoid power shorts.

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

Rated to 20Amp these connectors are an excellent replacement for JST plugs on todays small yet high C rated batteries.

Anderson Powerpole Compatible PA45 Tube (10pcs/bag)

Welcome to the new "best thing ever" for your workbench - The Mr Grippy soldering jig!

Mr Grippy is extremely well thought out with a spring loaded sliding action; Carbon Fibre construction and supplied with rubber 'feet' to stop him sliding around on your workbench - He grips!

He has 2 pairs vertical alloy posts to clamp your wires in place, these posts have a 1 inch gap between each pair - allowing you plenty of working space.

But that is not all!

Next we have a rectangular self-clamping slot - this slot allows the jig to firmly hold male or female  XT60 or Deans connectors in place making for neat and easy soldering.

Last but not least there is a pair of round holes to suit bullet connectors, making soldering ESC's or Battery connectors a breeze!

Caution: Carbon conducts electricity - Never place 2 plugs from the same battery pack in Mr Grippy simultaneously or he will get very hot under the collar!!

Dimensions: 70x60x30
Weight: 61g

JST SM 2 Pins Plug (Male To Female) 
Soft, high strand Silicon Wire (10cm)
Male and Female included.

3.5mm Gold connectors.
Rated to around 80A

Package contains 10 PAIRS (20PC) of connectors.

2mm Gold connectors.

Package contains 10 PAIRS of connectors. (20pc)

4mm Gold connectors.

Package contains 10 PAIRS of connectors.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

This Header pin type is perfect for repairing Servo pins on most 4 (or more) channel receivers.

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual or groups of pins.

There are 5 strips per pack.

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set includes the separator tool. Additional adapter sets for T-plugs are available here

Also available for XT-60

Specs:
Plug Type: T-Plug
Qty: 20
Weight: 0.9g (pair)

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set does not include the separator tool. Adapters with the separator tool included can be found here

Also available for XT-60

Specs:
Plug Type: T-plug
Qty: 20
Weight: 0.9g (pair)

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Males.

Also available as:
XT-60 Female
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Females.

Also available as:
XT-60 Male
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Female
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Males.

Also available as:
T-Plug Female
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females.

Also available as:
T-Plug Male
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Female
Qty: 6 pieces
Weight: 3g

 
 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females/Male

Also available as:
T-Plug Male
T-Plug Female

Specs:
Plug Type: T-Plug Female/Male
Qty: 12 pieces (6 Male, 6 Female)
Weight: 3g

The cable tie clip mounting set is the perfect solution for the modeller who likes a neat and tidy install. The clips provide slots for cable ties up to 4mm width and can be simply glued in onto the desired position within your model.

The clips are suitable for fiberglass, foam or wooden models but can be used for almost any application.     

Specs:
Material: ABS Plastic
Weight Per Set: 11g
Fits: 4mm cable ties

Protect your multirotor ESC / battery connectors from impact or prop damage with these handy
PCB's. Simply solder your Male XT90 connector directly to the board and secure to your multirotor
frame with some 3mm nuts and bolts.

Specs:
Length: 35mm
Width 10mm
Depth: 1.5mm
Hole Spacing: 35mm max

Molex 2.0 2Pin Cable Male Connector with 200mm x 24AWG Silicone Wire (5pcs)

Please note these are used in Nine Eagles equipment and the polarity is reversed.

Specs:
Connector: Molex 2.0 2pin
Colour: Black, Red
Length: 200mm

Molex 2.0 2Pin Cable Female Connector with 200mm x 24AWG Silicone Wire (5pcs)

Please note these are used in Nine Eagles equipment and the polarity is reversed.

Specs:
Connector: Molex 2.0 2pin
Colour: Black, Red
Length: 200mm

Molex 2.0 2Pin Female and Male Connectors (Plug and Crimp) (5sets)

Specs:
Connector: Molex 2.0 2pin Male and Female With Pins

JST-SH 3Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 3
Pin Spacing: 1mm
Socket Size: 5.5x4.5x3.1mm

JST-SH 5Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 5
Pin Spacing: 1mm
Socket Size: 7.5x4.5x3.1mm

JST-SH 6Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 6
Pin Spacing: 1mm
Socket Size: 8.5x4.5x3.1mm

JST-SH 8Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 8
Pin Spacing: 1mm
Socket Size: 10.5x4.5x3.1mm

JST-SH 4Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 4
Pin Spacing: 1mm
Socket Size: 6.5x4.5x3.1mm

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm