Workbench

The wheels has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.5inch

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 1.75 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 2.0inch

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 57mm (2.25inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 64mm (2.5inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 70mm (2.75inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

76mm (3.0inch)

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cuishioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 83mm (3.25inch) 

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

The wheel has a strong brushed finish alloy hub which is made from 1 piece lathed aluminium. The rubber appears to be of excellent quality and has an increasing resistance when compressed as it has a foam insert for cushioning.

These are an excellent looking wheel and will last long enough for you to pass them on to your grandchildren.

Excellent quality and a solid light weight design.

Diameter : 95mm (3.75inch)

Ball and roller link.
Rod end diameter: 3.9mm
Link hole diameter: 2mm
Length: 16mm

This is a great way to avoid power shorts.
Rated to around 120A

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!
 
Easier to solder and a stronger connection than Deans T-plugs

A quick and easy way to eliminate a built in BEC without the need to cut or modify your ESC wires.

Futaba 6pin Trainer Port Plug to JR Male Servo plug (1pcs/bag)

EC2 Male - ESC Connector (5pcs/bag)

EC2 Female & Male (5pcs/bag)

XT60 Harness for 2 Packs in Parallel (1pc)

Spec:
Weight: 11.2g

IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."

JST-XH to JST LED Power Distribution Lead - A neat way to power LED's from 3s Lipoly's using the balance plug.



** WARNING: Check Polarity of your setup before connecting this harness.

This adapter will convert a T-Connector equipped battery to an XT60 for use with an XT60 equipped ESC or an XT60 Charge lead.

60mm Molex 1.25 Servo Extension (5pcs/bag)

Spec.
Weight: 0.6g(Each)

120mm Molex 1.25 Servo Extension (5pcs/bag)

Spec.
Weight: 0.8g(Each)

120mm JST-SH1.0 Servo extension (5pcs/bag)

Spec.
Weight: 0.7g(Each)

This handy connector set will be appreciated by anyone who is dealing with 'Header Pins' on Multirotor boards or any othe type of PCB.

This set consists of a 1 pin housing and 1 female terminal.

This handy little accessory will allow you to easily split a single receiver channel output into five. A handy accessory for those building multicopters as it gives you an easy way to program the throttle range into your ESC's all together prior to fitting them to your frame. It can also be used as a splitter in LED lighting systems.

Spec:
Lead length: 60mm
Weight: 3g

Flat style 'AAA' battery holder, holds 4 cells

8mm Gold Connectors and housing set.

Rated to around 170A
Excellent for high voltage/ high current systems.

Includes:
2 male connectors, 2 femal connectors and 2 housings

Weight: 23g

This binding post set (1 Black, 1 Red) is ideal for building your own charging station or as a 12-24volt power access point for DC power applications.

They are designed to pass through wooden or metal facias up to 10mm thick (they are insulated and required a 7mm mounting hole). 

The output terminals have 4mm holes to suit 4mm male banana plugs, the terminal tips can be removed to allow aligator clamp access, the screw on terminal caps are insulated with a hard plastic shell.

Rated to around 50amps.

Spec:
Total length: 33mm
Depth: 10mm
Mounting hole: 7mm

120mm Male to Male Jumper Cable Set (10pc)

Specs: 
Length: 120mm
Pin Spacing: 1mm

1 x 6 Pin x 6 Individual Pin Female To Female, 1 x 2 Pin Female to Female, Jumper Cable Set.

Specs: 
Length: 120mm
Pin Spacing: 1mm
Length: 15.25mm (6 Pin Connector) 5mm (2 Pin Connector) 2.5mm (1 Pin Connector)

Molex 2 Pin Cable Female Connector with 220mm x 26AWG Wire

Specs:
Connector: Molex 2 Pin
Colour: Black, Red
Length: 220mm

Molex 3 Cable Female Connector with 230mm x 26AWG Wire.  

Specs:
Connector:  Female Molex 3 pin
Colour: Black, Yellow, White
Length: 230mm

These 3.5mm gold connectors are very compact which makes them ideal for many applications,especially good for multi rotors,this type of connector is also very good for where you are constantly plugging in and un-plugging.

4mm Gold Plated Banana Plug (10pc)