Workbench

This carbon fibre landing gear is lightweight but very stiff and with high torsional strength, the legs are also streamlined to reduce drag. Designed for Extra 260 aircraft but it is also suitable for other models with a fuselage width of 100mm.

Specs:
Fuselage Width: 100mm
Height: 170mm
Wheel Track: 315mm
Weight: 52g

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeler.

Made of quality carbon fiber, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high-quality spinner is also the perfect choice to finish off any model requiring a spinner of this size.

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeller.

Made from quality carbon fibre, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high quality spinner is also the pefect choice to finish off any model requiring a spinner of this size.

Includes:
1x 2.5" ultra lightweight carbon fibre spinner with aluminium backplate

Weight: 14.2g

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeller.

Made from quality carbon fiber, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high quality spinner is also the pefect choice to finish off any model requiring a spinner of this size.

Includes:
1x 1.75" ultra lightweight carbon fiber spinner with aluminium backplate

Weight: 6.9g

This beautiful spinner has been designed and produced specifically for F3A enthusiasts as well as the general aero-modeller.

Made from quality carbon fibre, it is ultra light and has the sleek design, strength and durability required for models especially in the F3A category.

This high quality spinner is also the pefect choice to finish off any model requiring a spinner of this size.

Includes:
1x 3" ultra lightweight carbon fibre spinner with aluminium backplate

Weight: 22.3g

This lightweight Carbon Fiber Tail Wheel Bracket is good for planes up to 30cc or EP planes.

Specs:
Length: 90mm
Thickness: 2.8mm
Width: 12mm
Weight: 5.8g

44mm diameter alloy spinner for folding prop, comes with adapters for 3.17mm, 4mm & 5mm motor shafts.

Prop Mount Bolts: 2.2mm
Weight: 36g

Super tough glass fiber tube, perfect for fixed wing and multi rotor projects. 

Specs:
Outer Diameter: 8mm
Bore Diameter 5mm
Length: 330mm

Super tough glass fiber tube, perfect for fixed wing and multi rotor projects. 

Specs:
Outer Diameter: 12mm
Bore Diameter: 10mm
Length: 330mm

These custom made aluminum extrusions are perfect for you Multi-Rotor DIY projects, no more borrowing moms shower curtain rods...they have internal riffling (ribbing) added to remain ultra-light but have increased strength and anti-vibration characteristics as well as anodized for various color options for orientation and Bling.

Specs:
Diameter:12.8 x 12.8mm (.5inch)
Length: 600mm
Color: Black
weight: 55g

These custom made aluminum extrusions are perfect for you Multi-Rotor DIY projects, no more borrowing moms shower curtain rods...they have internal riffling (ribbing) added to remain ultra-light but have increased strength and anti-vibration characteristics as well as anodized for various color options for orientation and Bling.

Specs:
Diameter:15 x 15mm
Length: 600mm
Color: Black
weight:63g

Glass Fiber Rod 2.5x750mm (10pcs)

Specs:
Weight: 7.7g (Each)
Diameter: 2.5mm
Length: 750mm
Material: Glass Fiber

This pushrod is left hand threaded on one side, and right hand threaded on the other. This enables you to adjust the pushrod length easily.

Spec.:
Diameter: M2
Total Length: 30mm
Weight: 0.5g

2mm 2 Blade CNC Folding Propeller Adapter CW & CCW (Gold)

Perfect for multi-rotors, pack comes complete with M2.5 mounting screws for the folding propeller blades.

Specs:
Suits Motor Shafts: 2mm
Blade Thickness: 3mm
Blade Mounting: M2.5
Direction: 1 x Clockwise, 1 x Counterclockwise
Material: Aluminum
Color: Gold
Weight: 6g each

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 18mm center to center
Dimensions: 25 x 8 x 9mm
Weight: 8g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 18mm center to center
Dimensions: 25 x 8 x 9mm
Weight: 8g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 10g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 10g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3.17mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 18mm center to center
Dimensions: 25 x 8 x 9mm
Weight: 8g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

These well made CNC aluminum adapters are designed to adapt folding propellers to motors with a standard 3.17mm shaft.

The Adapters can handle a range of blades from 5~12 inch props, and help make your Multirotor a little easier to transport, folding back towards the boom arms much like transporting an RC helicopter.

The adapters are secured to the motor shaft  by grub screws and they are suitable for any motors with a 3mm shaft.

Various colors are available to aid in rotation identification.

Grub screws and propeller mounting bolts included.

Specs:
Motor shaft dia: 3.17mm
Prop bolt dia: 2.5mm
Prop hole spacing: 22mm center to center
Dimensions: 29 x 8 x 9mm
Weight: 40g (Pair)

5 x 3 Folding Propeller Blades 1 Set CW and 1 Set CCW (Blue)

Perfect for 250 style multiracers and multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 5ins
Pitch: 3ins
Root Thickness: 2.4mm
Mounting Hole: 2mm
Rotation: 1 pair clockwise, 1 pair counterclockwise
Color: Blue
Weight: 0.12g each blade

8 x 4.5 Folding Propeller Blades 1 Pair CW and 1 Pair CCW (Blue)

Perfect for medium size multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 8ins
Pitch: 4.5ins
Root Thickness: 3mm
Mounting Hole: 3mm
Direction: 1 pair clockwise, 1 pair counterclockwise
Color: Blue
Weight: 3g each blade

8 x 4.5 Folding Propeller Blades 1 Pair CW and 1 Pair CCW (Yellow)

Perfect for medium size multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 8ins
Pitch: 4.5ins
Root Thickness: 3mm
Mounting Hole: 3mm
Direction: 1 pair clockwise, 1 pair counterclockwise
Color: Yellow
Weight: 3g each blade

9 x 4.7 Folding Propeller Blades 1 Pair CW and 1 Pair CCW (Green)

Perfect for medium size multicopters, each blade is manufactured from nylon and is fitted with a brass insert for strength through the blade root.

Specs:
Diameter: 9ins
Pitch: 4.7ins
Root Thickness: 3mm
Mounting Hole: 3mm
Direction: 1 pair clockwise, 1 pair counterclockwise
Color: Green
Weight: 3.4g each blade

Brass Linkage Stopper For 1mm Pushrods.

Specs:
Material: Brass
Weight: 7.31g (Qty 10)

Brass Linkage Stopper For 1.2mm Pushrods.

Specs:
Material: Brass
Weight: 7.63g (Qty 10)

Brass Linkage Stopper For 2mm Pushrods.

Specs:
Material: Brass
Weight: 10.17g (Qty 10)

Brass Linkage Stopper For 3mm Pushrods.

Specs:
Material: Brass
Weight: 9.63g (Qty 10)

A lightweight, highly adaptable model aircraft stand, ideal for building, field assembly and storage of all but the largest of models (We've used these for models up to 2m long without any problems.)

The interlocking, all foam stand assembles in seconds, is flexible, strong and will not leave marks on your model.

Specs:
Length: 580mm
Width: 300mm
Height: 355mm
Weight: 530g

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Red
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Yellow
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Green
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation

Great performance and super value!  and thats exactly what you need for your multirotor, a tough but expendable prop that wont break the bank to replace.

Packaged as a set of 2, with one CW rotation and one CCW rotation you can afford to stock up on these great value props.

Available in 6 colors, they can be mixed and matched to help with multirotor orientation or simply give your model a unique and cool look.  

Specs:
Size:5040 (5x4)
Color: Orange
Hub: 5mm
Material: Glass Reinforced Plastic/Nylon

Includes:
1 x CW rotation
1 x CCW rotation