Workbench

Self Adhesive Wing Tape 45mic x 45 mm x 100m ( Wide - Red) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 45 mm x 100m ( Wide - Orange) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 45 mm x 100m (Wide - Black) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 24 mm x 100m (Narrow - Yellow) - Perfect for adding strength and color to your foam model!

These handy wicks are great for lighting the smoke cartridges, each one will burn continously for 30mins.

Static Control Crank Handle Brushes are ideal for cleaning electronic components and prevent static build up that can potentially damage the components.

Specs:
Surface Resistance: 10⁴-10⁶ Ohm
Bristle Dimensions: 60 x 20mm
Handle Dimensions: 170 x 10mm 

HXT 4mm Connector to T-plug conversion charge lead

This will connect to a Lipo fitted with HXT 4mm connectors and a charge lead fitted with a T-plug

15x5.2 Folding Carbon Fiber Propeller Blades for DJI S800 Evo (2 pairs L/H & R/H Rotation).

Well made folding carbon fiber propeller blades for the DJI S800 Evo, improve the performance of your S800 with these very efficient propellers.

Specs:
Diameter: 15ins
Pitch: 5.2ins
Mounting Hole: 3mm
Mounting Hub Thickness: 4.15mm
Weight: 7.5g per blade
Rotation: 1 pair of each L/H and R/H
Material: 3K plain weave carbon fiber
Color: Black

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

As supplied these propellers are ready to fit a 6mm shaft but this can be reamered to suit shafts up to 10mm, adapters for a 5mm shaft are also included.

Specs:
Length: 14 inch
Pitch: 4.7 inch
Mounting Hole Diameter: 6mm
Hub Thickness: 7.5mm
Weight: 24g each
Rotation: Clockwise and counterclockwise

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

These propellers are specifically designed for DJI multirotors that have the ability to perform 3D flight, they will perform equally well whichever way up the multi-rotor is.

The props have a center hole of 8mm which suits DJI multirotors.

Specs:
Length: 8 inch
Pitch: 6 inch
Center Hole: 8mm
Hub Thickness: 10mm
Weight: 8g each
Rotation: Clockwise and counterclockwise

These nicely made carbon propellers have been designed specifically for large multi-rotors. They will make transportation much easier by allowing you to fold the blades back to the boom arms, much like transporting an RC helicopter.

Carbon propellers are much stiffer and lighter than conventional type blades which means you will instantly see an increase in performance. These blades are supplied as a set, which means you get 1 pair of clockwise rotation blades and 1 pair of counter-clockwise blades.

Specs:
Diameter: 17 inches
Pitch: 6 inches
Hub Thickness: 5mm
Bolt Hole: 3mm
Material: Carbon fiber
Weight: 13g (each blade)
Rotation: Clockwise and counter-clockwise

HobbyKing is excited to be carrying the full range of the ESUN brand of 3D printing filament. ESUN is recognised as one of the world's leading and most innovative manufacturers for 3D additive printing.

The PLA, ABS, Flexible, Luminous and many other types of materials are perfect for whatever application you have in mind. ESUN has established their brand recognition through their quality products and consistency, the filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.

PLA:
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when flexing, impact or torsional loads so the mechanical needs of the print project has to be evaluated.

PLA has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.

3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important. Please visit the ESUN web site for more information as well as the recommended settings for your printer.

http://en.esunchina.net/index.aspx

Features:
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors

Specs:
Filament Material: PLA
Filament Diameter: 1.75mm
Quantity: 0.5KG
Color: Orange

HobbyKing is excited to be carrying the full range of the ESUN brand of 3D printing filament. ESUN is recognised as one of the world's leading and most innovative manufacturers for 3D additive printing.

The PLA, ABS, Flexible, Luminous and many other types of materials are perfect for whatever application you have in mind. ESUN has established their brand recognition through their quality products and consistency, the filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.

PLA:
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when flexing, impact or torsional loads so the mechanical needs of the print project has to be evaluated.

PLA has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.

3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important. Please visit the ESUN web site for more information as well as the recommended settings for your printer.

http://en.esunchina.net/index.aspx

Features:
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors

Specs:
Filament Material: PLA
Filament Diameter: 1.75mm
Quantity: 0.5KG
Color: Silver

HobbyKing is excited to be carrying the full range of the ESUN brand of 3D printing filament. ESUN is recognised as one of the world's leading and most innovative manufacturers for 3D additive printing.

The PLA, ABS, Flexible, Luminous and many other types of materials are perfect for whatever application you have in mind. ESUN has established their brand recognition through their quality products and consistency, the filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.

PLA:
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when flexing, impact or torsional loads so the mechanical needs of the print project has to be evaluated.

PLA has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.

3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important. Please visit the ESUN web site for more information as well as the recommended settings for your printer.

http://en.esunchina.net/index.aspx

Features:
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors

Specs:
Filament Material: PLA
Filament Diameter: 1.75mm
Quantity: 1KG
Color: White

Looking for the professional finish on your next quadcopter project? look no further! This simple and easy to install light module set, will not only provide you with a proffesional look but will also allow your quadcopter to be seen in any conditions with its super bright LEDs

The LED flash light set offers a wide voltage input range from 2-6s and is suitable for quadcopters up to 500mm diameter. 

Features:
• Suitable for quadcopters up to 500mm diameter
• Wide input voltage, 2-6s capability
• High efficiency frequency conversion circuit
• Low power consumption
• No flashing delay or brightness reduction
• High power output
• Simple frequency adjustment

Specs:
LED Cable Length: 500mm
System Weight: 48g
Input Voltage 7.4v ~ 22.2v

Protect your multirotor ESC / battery connectors from impact or prop damage with these handy
PCB's. Simply solder your Male XT90 connector directly to the board and secure to your multirotor
frame with some 3mm nuts and bolts.

Specs:
Length: 35mm
Width 10mm
Depth: 1.5mm
Hole Spacing: 35mm max

Screw Grub Hex M5x5mm (10pcs/pack)

Add additional realism to your scale model with this LED set which operates in conjunction with the MrRC Sound V4.1 Sound unit.

A set of 6 bright orange 5mm LED lights that is pre-wired for plug in use on the V4 and V4.1 and card. Simply plug them in, and the light flashes in sync with the gun sound on the Aux. 1 channel. (labeled servo 2 on the board)

Mount these in the machine guns of your favorite model to increase the scale realism.

For use with MrRC Sound V4.1 Speakerless Sound System found here.

This is the WWI sound pack chip for the V4 MrRCsound sound unit. It includes 6 common engine sounds used in a number of WWI era Allied and Axis planes. These are high quality digital recordings of the real things. Sounds: Fokker D VII, Real Gnome, Le Rhone, Easy Gnome, Tiger Moth, and Stearman Plus aux. sounds for each.

For use with MrRC Sound V4.1 Speakerless Sound System found here.

This is the WWII sound pack chip for the V4 MrRCsound sound unit. It includes 6 common engine sounds used in a number of WWII era Allied and Axis planes. These are high quality digital recordings of the real things. Sounds: Allison, BMW 801, Sakae (Zero), Mikulin AM-38 (IL-2/Mig-3), Bristol Centaurus (Hawker Sea fury), and Wright Cyclone. Plus aux. sounds for each.

For use with MrRC Sound V4.1 Speakerless Sound System found here.

Control Horns 16x20mm (10pcs)

Nylon & Pinned Hinge 20x36 (10pcs)

68mm Alloy Wheel/Rubber Tyre - Split Alloy Wheel with Grooved, foam cored Rubber Tyre, suits 4mm Axle.

Weight: 41g

Protect your covering and the coating on your heat sealing iron with this easy to fit sock. Suits most standard model heat sealing irons.

Polyester Hook and Loop Peel-n-stick (Black) (1 Meter)

M2.5 x 40mm Steel Push Rod (10pc)

Volantex 759-8 Phoenix 2000 - Propeller Blades.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Volantex Phoenix 2000 - Propeller Set.

Set includes propeller blades, spinner, and collet prop adapter.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Tamiya Mini bending Pliers are perfect for small photo-etched parts which have no identifiable bending lines. The easy grip handle provides comfortable use whilst maintaining maximum control. The pliers allow you to bend straight lines up to 20mm.

Specs:
Nose Length: 20mm
Overall Length: 130mm
Weight: 49.13g 

Tamiya premium quality, clog free, wet and dry sanding paper. Ideal for modelers looking for the perfect finish. The pack contains 2 x P180, 1 x P240, 2 x P320. 

Specs:
Grades: P180, P240, P320
Dimensions: 229 x 93mm
Quantity: 5 pcs

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 20mm
Handle Material: Hardwood
Weight: 4.41g
Dimensions: 220 x 7mm

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 11mm
Handle Material: Hardwood
Weight: 2.86g
Dimensions: 220 x 5mm

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 7mm
Handle Material: Hardwood
Weight: 1.4g
Dimensions: 210 x 4mm

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 7mm
Handle Material: Hardwood
Weight: 1.8g
Dimensions: 210 x 5mm

Tamiya Standard Blunt Brushes are made from horse hair and feature lightweight hardwood handles. The brushes are ideal for fine detailed artwork.

Specs:
Bristle Material: Horse hair
Bristle Length: 7mm
Handle Material: Hardwood
Weight: 2.22g
Dimensions: 200 x 5mm