Workbench
-
Folding Carbon Fiber Propeller 10x6 (1pc)$10.07Super strong & stiff, lightweight, efficient and just a little bit good looking Carbon Fibre Folding prop set with alloy insert for M3 mounting screws.
Weight: 11g (Pair)
Learn More -
Folding Carbon Fiber Propeller 12x6.5 (1pc)$13.95Super strong & stiff, lightweight, efficient and just a little bit good looking Carbon Fibre Folding prop set with alloy insert for M3 mounting screws.
Weight: 16g (Pair)
Learn More -
HobbyKing Cutting Mat$8.99Cut in style with your very own HobbyKing Cutting mat.
Learn More
Perfect for protecting your work surface and keeping your hobby knife sharp.
Size: L450mm × W300mm (18"x12") -
HobbyKing® ™ Glider Nose Tow-Line Release (11.7x42mm)$4.71A reliable and quality mechanism for any tow-line glider.
Simply install in the nose of the glider and use a small 9g+ servo to pull/release the cable.Machined from 6061 billet alloy & designed in-house by HobbyKing® ™ engineers.Spec.Length: 42mmOutside diameter: 11.7mmWeight: 4.5gLearn More -
-
Folding Propeller W/Alloy Hub 40mm/4.0mm Shaft 11x8 (1pc)$9.07Folding Propeller w/ Alloy hub
Learn More
Machined alloy hub. -
Folding Propeller W/Alloy Hub 35mm/3mm Shaft 6x3 (1pc)$6.90Folding Propeller 6x3 W/ Alloy hub 35mm / 3.2mm shaftLearn More
Folding Propeller w/ Alloy hub
Machined alloy hub. -
Folding Propeller W/Alloy Hub 35mm/3.17mm Shaft 7x4 (1pc)$5.93
Folding Propeller w/ Alloy hub
Learn More
Machined alloy hub. -
-
-
-
-
-
Prop adapter w/ Alu Cone M6x4mm shaft (Grub Screw Type)$3.34Prop adapter w/ Alu Cone M6x4mm shaft (Grub Screw Type).
Learn More
Specs:
Shaft Size: Suits 4mm motor shafts
Prop Mounting Thread: M6
Material: Aluminum
Quantity: 1pc -
Prop adapter w/Ally Cone M10x8mm shaft (Grub Screw Type)$3.42Prop adapter w/ Alu Cone M10x8mm shaft (Grub Screw Type).
Learn More
Specs:
Shaft Size: Suits 8mm motor shafts
Prop Mounting Thread: M10
Material: Aluminum
Quantity: 1pc -
Prop adapter w/ Steel Nut 1/4x28-3.2mm shaft (Grub Screw Type)$2.05Prop adapter w/ steel nut 1/4x28-3.2mm shaft (Grub Screw Type).
Specs:
Shaft Size: Suits 3.2mm motor shafts
Prop Mounting Thread: 1/4x28
Material: Aluminum with steel nut
Quantity: 1pc
Learn More
Please note: The picture above shows the different sizes that are available, you will only receive one prop adapter of the size in the specs and title. -
-
UltraDetail Scale Cockpit$8.75UltraDetail Scale Cockpit perfect for many scale glider applications!
Specs:
Width: 76mm
Length: 270mm
Heigth: 130mm
Learn More -
Insta-Cure IC-Gel .7 oz$6.88Insta-Cure IC-Gel .7 ozIC-GEL is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE; IC-Gel, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL that you want.IC-GEL is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET allows IC-GEL to be sanded or filed to final shape in less than 20 seconds. Autobody repairmen have finished their jobs in a fraction of the time by using IC-GEL with the additional advantage over normal body putties of superior bonding to metal surfaces. IC-GEL, along with MAXI-CURE, is also used for the underwater bonding of coral to rock.Learn More -
Insta-Flex Plus Clear Rubber CA Glue 1. oz$7.85Insta-Flex Plus Clear Rubber CA 1. ozINSTA-FLEX+ clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to be seen. The carbon component of IC-2000 that gives the CA its black color also contributes to its unsurpassed strength. Since INSTA-FLEX+ has this carbon removed, its strength is a little less than IC-2000 but still superior to standard CAs. When aesthetics are important and a flexible bond is required, INSTA-FLEX+ is your best choice. It forms superior bonds to soft urethane and vinyl plastics. Both INSTA-FLEX and INSTA-FLEX+ work well when bonding R/C car tires. When a joint has a larger than normal gap, flexible CAs provide superior shock resistant bonds.Learn More -
Servoless Nose Wheel Retract with Metal Trunnion 33mm x 35mm Mount$9.18Servoless nose wheel retract with metal trunnion and steering arm.
33mm x 35mm Mount 90 Degree
Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.Specs:
Learn More
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)
For matching main gear retracts see PRODUCT ID: HK-15090S-2 -
Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc)$18.95Servoless Retract with Metal Trunnion 33mm x 35mm Mount (2pc) 90 Degree - Features Auto Cut Off and pre-installed 4mm Oleo Mounting Pin.
Specs:
Mount Plate Dimensions: 33mm x 35mm
Scew Hole Spacing: 24mm x 28mm
Depth: 26mm
Length: 61mm
Pin: 4mm
Weight: 46g (x 1)
Learn More -
Insta-Set CA Accelerator 2. oz$5.42Insta-Set CA Accelerator 2. ozINSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joints strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.Learn More -
Insta-Set CA Accelerator 8. oz$10.97Insta-Set CA Accelerator 8. ozINSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joints strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.Please note: This is a refill bottle only for a spray applicator, no spray nozzle is supplied with this product.Learn More -
HK-171 Thread Locker & Sealant Medium Strength (Blue)$4.99HK-171 is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once HK-171 is cured, the fasteners can be disassembled with standard hand tools if required.Learn More -
Electric Retract with Reversible Mount (1pc) 18.8g$9.01The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!
Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mmMount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mmNot suitable for a plane heavier than 2kg
Learn More
Strut & Landing gear not included -
HobbyKing Scale Airport Windsock (rip-stop)$3.76Made from Porcher® UV proof paraglider ripstop nylon. The HobbyKing windsock is lightweight and resistant against prolonged wind, rain and sun damage. The lightweight material also means it's able to indicate lighter winds, critical for R/C planes.Learn More -
Carbon Fiber landing gear (15cc size)$16.99Sport style carbon fibre landing gear.Perfect for YAK or sport style planes of around 15ccExtremely light weight and almost unbreakable!Weight: 41gDimensions:A: 170mmB: 70mmC: 20mmD: 275mmH: 148mmLearn More -
Carbon Fiber landing gear (20cc size)$17.71Sport style carbon fibre landing gear.Perfect for YAK or sport?style planes of around 20ccExtremely light weight and almost unbreakable!Learn More
Specs:Fuselage Width: 120mmHeight: 135mmWheel Track: 315mmWeight: 51g -
Carbon Fiber landing gear (28cc size)$19.60Sport style carbon fibre landing gear.Perfect for YAK or sport style planes of around 28ccExtremely light weight and almost unbreakable!Weight: 107g
Dimensions:A: 170mmB: 150mmC: 39mmD: 360mmH: 170mmLearn More -
Carbon Fiber landing gear (50cc size)$28.92Sport style carbon fibre landing gear made from 3K carbon fiber weave.Perfect for YAK or sport style planes of around 50cc.Extremely light weight and almost unbreakable. Much stronger than any alloy strut!Weight: 151g
Dimensions:A: 230mmB: 160mmC: 30mmD: 460mmH: 195mmLearn More -
Carbon Fibre Tail Wheel Bracket - Up to 15cc Models$2.36Carbon Fibre Tail Wheel Bracket - Up to 15cc Models
Learn More
Specs.
Length: 76mm
Thickness: 2.2mm
Width: 11.2mm
Weight: 3.2g -
Digital Servoless Retractable System (1pc) 37g$8.83The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servo mechanism with metal gearing and a high torque motor ensures trouble free flying!
Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!Landing gear not included with the servoless retractable system.
Features:
Robust landing gear strut and mounting bracketBuilt-in 10 seconds over current and jamming protectionIntegrated electric motor with a micro PCBDouble shock absorption design, completely protect the gearsAuto 90 degree twist when retractedLearn More
Spec.
Working voltage: 4.5~5.5V
Speed: 0.7s/60deg 4.8v - 0.55/60deg 6v
Idle current: 3mA
Angle limit: 90 degree when retracted
Operating temp: -10~50C
Weight: 37g
Shaft size: 3mm
Mounting area size: 35mm x 33mm
Length: 67mm
Not suitable for a plane heavier than 2.5kg
Login and Registration Form