Workbench

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires.
The mesh expands to 4x original size and comes in a variety of colours

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Red is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Length: 1m
Colour: Translucent Red

Turnigy Pure-Silicone Wire 12AWG (1mtr) Translucent Black is the final touch of bling for your next RC project. Not only will these cool wires give your model an individual look but their super soft flexibility makes them easier to fit into restrictive spaces and around tight corners.  

Features:
• High quality TURNIGY silicone wire.
• High strand count.
• Pure copper & pure silicone.

Specs:
Temp rating: 200° C
Gauge: 12 AWG
Lenght: 1m
Colour: Translucent Black

Turnigy 1/2" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

Turnigy 3/8" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

Pull-pull/3mm Clevise Quick Link Couplers - 26mm Length

Ultra Light Rubber PU Scale Wheel 2.75"/70mm

Specs:
Width: 26.5mm
Weight: 13g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.00"/76.2mm 

Specs:
Width: 26.5mm
Weight: 18g
Axle: 4mm

Ultra Light Rubber PU Scale Wheel 3.5"/89mm

Specs:
Width: 31mm
Weight: 24g
Axle: 5mm

Molex 2.0 2Pin Cable Male Connector with 200mm x 24AWG Silicone Wire (5pcs)

Please note these are used in Nine Eagles equipment and the polarity is reversed.

Specs:
Connector: Molex 2.0 2pin
Colour: Black, Red
Length: 200mm

Molex 2.0 2Pin Cable Female Connector with 200mm x 24AWG Silicone Wire (5pcs)

Please note these are used in Nine Eagles equipment and the polarity is reversed.

Specs:
Connector: Molex 2.0 2pin
Colour: Black, Red
Length: 200mm

Molex 2.0 2Pin Female and Male Connectors (Plug and Crimp) (5sets)

Specs:
Connector: Molex 2.0 2pin Male and Female With Pins

JST-SH 3Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 3
Pin Spacing: 1mm
Socket Size: 5.5x4.5x3.1mm

JST-SH 5Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 5
Pin Spacing: 1mm
Socket Size: 7.5x4.5x3.1mm

JST-SH 6Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 6
Pin Spacing: 1mm
Socket Size: 8.5x4.5x3.1mm

JST-SH 8Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 8
Pin Spacing: 1mm
Socket Size: 10.5x4.5x3.1mm

Constructed from tough carbon fiber these high-quality spinners are perfect for those looking for an amazing finish to their model aircraft.  

Deliberately left "blank" so that they can be modified by you to suit any number propeller blade configuration and they have a single bolt mounting recess in the nose of the spinner to enable that mounting option to be used.

These spinners have been made available for builders of model aircraft and are amongst the best carbon fiber composite types available.   Strong and beautifully finished in high gloss red or orange they look fantastic and will last.

For scale enthusiasts the conical profile of these spinners is very close to that used on PC9's, PC21's, Cessna 140's etc but would certainly be perfect for any sport/scale aircraft to give your model that wow factor finish.

Specs:
Diameter: 2.5"
Length: 3.5"
Weight: 29g

JST-SH 4Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 4
Pin Spacing: 1mm
Socket Size: 6.5x4.5x3.1mm

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

KingKong Self-tightening Prop Adapters (CW/CCW) (2 pairs)

These are designed for KingKong propellers and have two lugs on the bottom side.

Includes:
2 x Self-tightening Prop Adapters (CW)
2 x Self-tightening Prop Adapters (CCW)

If you're looking for high performance and that realistic jet sound in your latest 64mm sized EDF model, then look no further than this high quality 12 bladed unit.
The 12 blade fan moves a greater volume of air to make for a quiet unit with an amazing sound, this is the closest you will ever get to the sound of a turbine without actually buying one!

Molded from 30% FRP with integral mounting lugs, the unit is for use with 20mm EDF motors or those with a 20mm extension and has adapters to suit 3.17 and 4mm motor shafts.

For the best results from this and any ducted fan unit we strongly recommend checking the balance of the complete assembly and eliminating any sources of vibration.

Specs:
Outside diameter: 66.7mm (78mm with intake lip)
Shroud length: 45mm
Rotor diameter: 64mm 
Material: Carbon fiber reinforced Nylon rotor
Motor dia: 20.5mm max
Shaft adaptor to motor: 3.17mm or 4mm
Recommended motors: 3300Kv motor for 3s/2800Kv motor for 4s
Max RPM: 38000 RPM
Max power: 1300W
Weight: 43g w/intake lip

Included:
64mm 12-Blade EDF Unit
Spinner
Intake lip
3.17 & 4.0mm shaft adapters
Retaining nut & washer

Always use a Watt meter to ensure that your motor and ESC are running within specs, as 10/12 blade fans draw more current than conventional types.

If you're looking for high performance and that realistic jet sound in your latest 70mm sized EDF model, then look no further than this high quality 12 bladed unit.

Excellent double sided tape for outdoor use. This tape is strong and padded.

Great for using on applications that need a bit of padding such as mounting receivers, flight controllers or ESCs. 

Specs:
Width: 20mm
Length: 1500mm

Nylon Spacer 20mm M3 F/F Red (10pcs)

Specs:
Shape: Hex
Length: 20mm
Screw Thread: M3 Female/Female
Qty: 10