Workbench

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 6mm before expansion
Length: 1m
Color: Black

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 1m
Color: Grey

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 1m
Color: Clear

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colors.

Specs:
Diameter: 3mm before expansion
Length: 1m
Color: Pink

Our Wire Mesh Guard is an excellent way to protect servo leads or battery wires. The mesh expands to 4x original size and comes in a variety of colours.

Specs:
Diameter: 3mm before expansion
Length: 1mtr
Color: Black

Great for protecting battery packs, combining batteries or covering an ESC etc.

Great for protecting battery packs, combining batteries or covering an ESC etc.

Great for protecting battery packs, combining batteries or covering an ESC etc.

Great for protecting battery packs, combining batteries or covering an ESC etc.

Turnigy Heat Shrink Tube 6mm Red (1m)

The Vertical mount cable tidy clip set is the perfect solution for the modeller who likes a neat
and tidy install. The clips are supplied on the sprue and have single wire to triple wire options.

The clips are perfect for foam mounting, but can be used for almost any application simply cut a slot in your model and glue the cable tidy in position!

Specs:
Material: ABS Plastic
Weight Per Set: 30g
Fits Max Cable Diameter: 4mm

The cable tie clip mounting set is the perfect solution for the modeller who likes a neat and tidy install. The clips provide slots for cable ties up to 4mm width and can be simply glued in onto the desired position within your model.

The clips are suitable for fiberglass, foam or wooden models but can be used for almost any application.     

Specs:
Material: ABS Plastic
Weight Per Set: 11g
Fits: 4mm cable ties

Balance Lead Tidy/Saver 4S (4pcs)

Looking for a way of keeping balance leads tidy or out of your multirotor propellers then these little adapters will fit your needs. They come with double sided tape to stick them down.

There are different sizes depending on the cell count of your battery.

Turnigy 0.8mm heat shrink tube.  Perfect for small lead wire insulation (Black x 1m)

The RoboStar SBRS-5314HTG robot servo is packed with features offering the very best for robot users. This rugged metal gear servo is perfect for your custom robot or other automation project. The plastic and metal alloy case dissapate heat and features threaded mounting holes for machine screws. The high power brushless motor provides ample moving power and precision for your project. This RoboStar servo can accept voltages as high as 11.1V, a 3S Lipo!

Each servo includes a removable input wire lead that plugs directly to the side of the case, as well as plastic and alloy servo wheels.

Features:
• High torque
• High precision, all metal gears, double bearing
• Good heat dissipation
• Rotation scope: 0~280°
• Accepts high voltages up to 3S 11.1V Lipoly
• Removable input lead for custom wire harnesses
• High power, super reliable brushless motor

Specs:
Output: Single
Operating Voltage: 7.4~11.1V (2~3S Lipoly)
Operating Speed: 0.18Sec/60° / 0.14Sec/60°
Stall Torque: 32.4kg.cm /53.1kg.cm
Rotation Scope: 0~280°
Size: 43X32X32.5mm
Weight: 81g
Spline: 25T
Ball Bearing: 2BB
Gear: Metal
Wire Length: 50cm
Bolt Pattern: 21.5x21.5mm
Operating Frequency: 1520us/333Hz, 900~2100us

Mounting screw is 3mm

The ideal solution for keeping your RC planes protected when storing and transporting them. Made with strong, colorful polyester materials, the tote bags also include an additional large storage pocket and wing pocket. These tote bags are padded, lined, and fitted with heavy-duty zippers, plus a carry strap. 

The Turnigy glider bag backpack is great for securely carrying your glider to a remote slope location, where your parking area is far from your flying area. Just strap it to your back and go! Made of durable 600 denier nylon, this wing bag is designed to handle every day use for years to come.

A main compartment holds your wings and fuselage, while a separate compartment holds your transmitter or other accessories. There is even a compartment designed specifically to hold your wing tubes. The compartments are closed with drawstrings and the shoulder straps adjust to fit any size person.

Perfect for 2 meter or larger sailplanes. For smaller sailplanes take a look at our smaller Turnigy Glider Backpack

Specs:
Main Compartment Size: 1300 x 310 x 70mm
Accessory Compartment Size: 200 x 170 x 120mm

Avios Hawker Sea Fury 1200mm - Propeller Set

Includes:
5-Blade Hub
5 * Propeller Blades
5 * Screw
5 * Locknut

*NOTE - this propeller is for static display only. It is not intended to be used for the purposes of propelling the aircraft to fly. 

Italeri acrylic paints are easy to use and can be applied with a brush or an airbrush (dilution required). The Italeri range of acrylic paints are odorless and non toxic.

The paints are supplied in 20ml bottles and have a flip-top cap to prevent spills.

Specs:
Color: Flat marrone mimetico  1
Volume: 20ml
Weight: 38.60g

Servo Tape (Clear) 25mm x 1m

This awesome servo tape is super strong and when the backing is removed it is completely clear. This tape has the amazing property of being very sticky and will securely fasten your servos, receivers, speed controls and transponders to your aeroplane, helicopter car or boat, yet when you wish to remove them, they come right off without the servo tape breaking apart plus there is no residue left on the surface!!

Very clean, very secure and incredibly versatile.

Size
Width: 25mm
Depth: 1mm
Length: 1m

Self Adhesive Wing Tape 45mic x 45 mm x 100m ( Wide - Red) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 45 mm x 100m ( Wide - Orange) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 45 mm x 100m (Wide - Black) - Perfect for adding strength and color to your foam model!

Self Adhesive Wing Tape 45mic x 24 mm x 100m (Narrow - Yellow) - Perfect for adding strength and color to your foam model!

These handy wicks are great for lighting the smoke cartridges, each one will burn continously for 30mins.

Static Control Crank Handle Brushes are ideal for cleaning electronic components and prevent static build up that can potentially damage the components.

Specs:
Surface Resistance: 10⁴-10⁶ Ohm
Bristle Dimensions: 60 x 20mm
Handle Dimensions: 170 x 10mm 

HXT 4mm Connector to T-plug conversion charge lead

This will connect to a Lipo fitted with HXT 4mm connectors and a charge lead fitted with a T-plug

15x5.2 Folding Carbon Fiber Propeller Blades for DJI S800 Evo (2 pairs L/H & R/H Rotation).

Well made folding carbon fiber propeller blades for the DJI S800 Evo, improve the performance of your S800 with these very efficient propellers.

Specs:
Diameter: 15ins
Pitch: 5.2ins
Mounting Hole: 3mm
Mounting Hub Thickness: 4.15mm
Weight: 7.5g per blade
Rotation: 1 pair of each L/H and R/H
Material: 3K plain weave carbon fiber
Color: Black

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

As supplied these propellers are ready to fit a 6mm shaft but this can be reamered to suit shafts up to 10mm, adapters for a 5mm shaft are also included.

Specs:
Length: 14 inch
Pitch: 4.7 inch
Mounting Hole Diameter: 6mm
Hub Thickness: 7.5mm
Weight: 24g each
Rotation: Clockwise and counterclockwise

The Quanum series of carbon fiber propellers have been specially designed for multi-rotors and are manufactured to very exacting standards. They are extremely light and strong and you can expect an increase in performance due to their ultra thin and stiff carbon construction.

These propellers are specifically designed for DJI multirotors that have the ability to perform 3D flight, they will perform equally well whichever way up the multi-rotor is.

The props have a center hole of 8mm which suits DJI multirotors.

Specs:
Length: 8 inch
Pitch: 6 inch
Center Hole: 8mm
Hub Thickness: 10mm
Weight: 8g each
Rotation: Clockwise and counterclockwise

These nicely made carbon propellers have been designed specifically for large multi-rotors. They will make transportation much easier by allowing you to fold the blades back to the boom arms, much like transporting an RC helicopter.

Carbon propellers are much stiffer and lighter than conventional type blades which means you will instantly see an increase in performance. These blades are supplied as a set, which means you get 1 pair of clockwise rotation blades and 1 pair of counter-clockwise blades.

Specs:
Diameter: 17 inches
Pitch: 6 inches
Hub Thickness: 5mm
Bolt Hole: 3mm
Material: Carbon fiber
Weight: 13g (each blade)
Rotation: Clockwise and counter-clockwise

HobbyKing is excited to be carrying the full range of the ESUN brand of 3D printing filament. ESUN is recognised as one of the world's leading and most innovative manufacturers for 3D additive printing.

The PLA, ABS, Flexible, Luminous and many other types of materials are perfect for whatever application you have in mind. ESUN has established their brand recognition through their quality products and consistency, the filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.

PLA:
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when flexing, impact or torsional loads so the mechanical needs of the print project has to be evaluated.

PLA has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.

3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important. Please visit the ESUN web site for more information as well as the recommended settings for your printer.

http://en.esunchina.net/index.aspx

Features:
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors

Specs:
Filament Material: PLA
Filament Diameter: 1.75mm
Quantity: 0.5KG
Color: Orange

HobbyKing is excited to be carrying the full range of the ESUN brand of 3D printing filament. ESUN is recognised as one of the world's leading and most innovative manufacturers for 3D additive printing.

The PLA, ABS, Flexible, Luminous and many other types of materials are perfect for whatever application you have in mind. ESUN has established their brand recognition through their quality products and consistency, the filaments have a stable melting point, good round shape and most importantly a 0.05mm uniform diameter tolerance for a consistent flow rate.

PLA:
PLA has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses. PLA is considered stronger than ABS but is more susceptible to cracking when flexing, impact or torsional loads so the mechanical needs of the print project has to be evaluated.

PLA has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.

3D printing is a fun and exciting hobby with a wide range of uses from prototyping parts to making toys for the kids. Picking the right filament for your application is very important. Please visit the ESUN web site for more information as well as the recommended settings for your printer.

http://en.esunchina.net/index.aspx

Features:
• Stable melting point
• Good round shape
• Uniform diameter tolerance 0.05mm
• Consistent colors

Specs:
Filament Material: PLA
Filament Diameter: 1.75mm
Quantity: 0.5KG
Color: Silver