Workbench

Protect your multirotor ESC / battery connectors from impact or prop damage with these handy
PCB's. Simply solder your Male XT90 connector directly to the board and secure to your multirotor
frame with some 3mm nuts and bolts.

Specs:
Length: 35mm
Width 10mm
Depth: 1.5mm
Hole Spacing: 35mm max

Add additional realism to your scale model with this LED set which operates in conjunction with the MrRC Sound V4.1 Sound unit.

A set of 6 bright orange 5mm LED lights that is pre-wired for plug in use on the V4 and V4.1 and card. Simply plug them in, and the light flashes in sync with the gun sound on the Aux. 1 channel. (labeled servo 2 on the board)

Mount these in the machine guns of your favorite model to increase the scale realism.

For use with MrRC Sound V4.1 Speakerless Sound System found here.

This is the WWI sound pack chip for the V4 MrRCsound sound unit. It includes 6 common engine sounds used in a number of WWI era Allied and Axis planes. These are high quality digital recordings of the real things. Sounds: Fokker D VII, Real Gnome, Le Rhone, Easy Gnome, Tiger Moth, and Stearman Plus aux. sounds for each.

For use with MrRC Sound V4.1 Speakerless Sound System found here.

This is the WWII sound pack chip for the V4 MrRCsound sound unit. It includes 6 common engine sounds used in a number of WWII era Allied and Axis planes. These are high quality digital recordings of the real things. Sounds: Allison, BMW 801, Sakae (Zero), Mikulin AM-38 (IL-2/Mig-3), Bristol Centaurus (Hawker Sea fury), and Wright Cyclone. Plus aux. sounds for each.

For use with MrRC Sound V4.1 Speakerless Sound System found here.

Control Horns 16x20mm (10pcs)

Nylon & Pinned Hinge 20x36 (10pcs)

68mm Alloy Wheel/Rubber Tyre - Split Alloy Wheel with Grooved, foam cored Rubber Tyre, suits 4mm Axle.

Weight: 41g

M2.5 x 40mm Steel Push Rod (10pc)

Volantex 759-8 Phoenix 2000 - Propeller Blades.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Volantex Phoenix 2000 - Propeller Set.

Set includes propeller blades, spinner, and collet prop adapter.

Specs:
Diameter: 10 in.
Pitch: 6 in.

Nylon Arm 2.8 x 6 x 6 (10pcs)
Diam: 2.8mm

Front Wheel Steering Arm & Mount Set (5sets)

29x26x13.5mm
diam4x40

Adjustable Control Horn 3x24mm (5sets)

Pivot & Round Hinges 2x33 (10pcs)

A replacement servoless retract unit (1pc) for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

This is a replacement spinner for the H-King Yak-11 Red Reno Racer.

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement 10x6 propeller for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A complete set of floats including a water rudder for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model. Take your flying to the next level and have loads of fun flying from your favorite lake or waterway. This set includes everything that is necessary to convert your Prime Tundra to a floatplane.

Features:
• The perfect addition for your Prime Tundra
• Made of tough EPO foam
• Includes a water rudder for improved steering whilst taxying
• Includes mounting hardware and decal set
• Very quick and easy to fit

Included:
1 x Pair of EPO floats
1 x Front mounting strut
1 x Rear mounting strut
2 x Cross braces
1 x Water rudder
1 x Decal set

A complete replacement set of LED lights with wiring and connectors for the Durafly Night Tundra STOL/Sports model. Also could be used on your existing Tundra or other models of a similar size.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement prop adapter for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

A replacement 11x7 propeller in black for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement pair of CNC machined oleo struts for the H-King Yak-11 Steadfast Single-Seat Racer with wheels and doors.

Please note: The servoless retracts are not included.

A replacement electric servoless retract unit for the H-King Yak-11 Steadfast Single-Seat Racer.

Please note: This is a single unit and not a pair.

A replacement red spinner for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement 16x6 propeller for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement steerable tailwheel assembly for the H-King Yak-11 Steadfast Single-Seat Racer that includes the tailwheel, and steering-arm.

A replacement set of wheels for the XFLY Alpha Jet (3pcs).

A replacement nose gear oleo unit with wheel for the 975mm XFLY T-7A Red Hawk.