Workbench

2mm Gold connectors.

Package contains 10 PAIRS of connectors. (20pc)

4mm Gold connectors.

Package contains 10 PAIRS of connectors.

Aerostar Composite Propeller 10x5 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 11x5.5 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 13x4 Bone (CCW) (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 14x7 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

Aerostar Composite Propeller 8x4 Bone (1pc)

AeroStar Composite Propellers are made from high-grade composite plastics that are easy to balance and offer great performance with a low price.

*Note:
1) This is not an APC Propellers product, nor is it a copy of an APC Propellers product. The APC Propellers brand is a trademark of Landing Products Inc.

2) This is not an underground black market fake of an APC Propellers product. AeroStar Composite Propellers quality is guaranteed. 

These propellers are beautifully finished and highly efficient

APC Style Propeller 15x5.5 Red (CW/CCW) (2pcs)

These propellers are beautifully finished and highly efficient

T-Style Propeller 15x5.5 Yellow (CW/CCW) (2pcs)

6 LED Strip RED

Specifications:
Weight: 10g
Lead Length: 81cm
Plug: JR

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 5/32" (4.0mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

Getting wheel pants mounted to your undercart and getting them to stay there has been a problem for many years, not anymore, with the Sullivan adjustable brackets this job has now been made very much easier. The brackets are very strong, they are made of high strength heat treated steel, they can also be adjusted for "give" so that you do not damage the wheel pants on a heavy landing. These mounts will fit 3/16" (4.8mm) axles and music wire and the wheel pants can be either glued or bolted to the brackets.

Please note:  2 brackets are supplied but this is only enough for 1 wheel pant, you will require 2 packs for a standard 2 wheel undercart.

The MultiStar 1045 prop was made specifically for Mutli-Rotor use using a slot (DJI) style hub for proper centering and non-slip engagement. The Multistar line of props come in CW and matched CCW rotations and the center hubs are beefed up, so no fear of splitting the hub and tossing a blade! They also have a thicker cross-section to minimize flexing and increase their durability. The 1045’s precision molding will allow these props to require very little to no balancing. Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.

Specs:
Size: 10-4.5
rotation: CW
Hub: slot (DJI) style, 8mm bottom Dia  7mm flat to flat and drop down to 6mm top hole

Included:
Two CW Props

Add a touch of professionalism to your scale RC Jet with the "OK Hand
Style" Jet pilot. Suitable for 90mm Class Jets.

Specs:
Height: 91mm
Width: 77mm
Depth: 45mm / 64mm (Incl. Hand)
Weight: 34g

Add a touch of professionalism to your scale RC Jet with the "OK Hand
Style" Jet pilot. Suitable for 90mm Class Jets.

Specs
Height: 91mm
Width: 77mm
Depth: 45mm / 64mm (Incl. Hand)
Weight: 34g

Very well made and finished lightweight alloy oleo struts with offset and trailing link, they are sprung loaded and will accept a wheel of up to 76mm (3ins) diameter.

Very well made and finished lightweight alloy straight oleo struts suitable for main undercarriages. These struts are sprung loaded which helps smooth out those slightly heavy arrivals.

Well made self tighening propellers, improve the performance of your multirotor with these efficient propellers.
The pack contains 1 x clockwise and 1 x counter clockwise rotating props. 

Specs:
Prop Size: 5 x 3.2ins
Pitch: 3.2
Mounting Thread: 5mm
Weight: 4g per blade
Rotation: 1 each L/H and R/H
Material: Nylon
Color: Black

Well made self tighening propellers, improve the performance of your multirotor with these efficient propellers.

The pack contains 1 x clockwise and 1 x counter clockwise rotating props. 

Specs:
Prop Size: 5 x 3.2ins
Pitch: 3.2
Mounting Thread: 5mm
Weight: 4g per blade
Rotation: 1 each L/H and R/H
Material: Nylon
Color: Red

Aluminum Folding Propeller Spinner 40mm Diameter w/5.0mm Shaft Adapter.

Dimensions as per image:
A: 39.8mm
B: 45.2mm
C: 5mm
D: 31mm
E: 3.75mm
F: 36.7mm
Blade Retaining Bolts: 3mm
Weight: 34g

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

This Header pin type is perfect for repairing Servo pins on most 4 (or more) channel receivers.

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual or groups of pins.

There are 5 strips per pack.

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set includes the separator tool. Additional adapter sets for T-plugs are available here

Also available for XT-60

Specs:
Plug Type: T-Plug
Qty: 20
Weight: 0.9g (pair)

Ever damaged your model trying to separate difficult plugs? Frustrated by tight connectors? Turnigy to the rescue with their EasyOff Plug Disconnect system. These handy little clip-on adapters slip onto your T-plug connector and permanently stay in place. A special separator tool slips in between these clips, allowing you to effortlessly separate the plugs. It is a great addition for all your batteries or speed controls, but is very useful for tight battery hatch areas on airplanes and gliders.

The EasyOff plug adapters are universal fit between male and female plugs. They clip into place, though we recommend a small drop of CA glue for the ultimate hold. These are design for XT Branded T-plugs with molded grip detail.

This set does not include the separator tool. Adapters with the separator tool included can be found here

Also available for XT-60

Specs:
Plug Type: T-plug
Qty: 20
Weight: 0.9g (pair)

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Males.

Also available as:
XT-60 Female
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for XT-60 Females.

Also available as:
XT-60 Male
XT-60 Male/Female Set

Specs:
Plug Type: XT-60 Female
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your XT-60 and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Males.

Also available as:
T-Plug Female
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Male
Qty: 6 pieces
Weight: 3g

 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females.

Also available as:
T-Plug Male
T-Plug Male/Female Set

Specs:
Plug Type: T-Plug Female
Qty: 6 pieces
Weight: 3g

 
 

Many connectors are small and diffucult to grip. Especially if you have oil or grime on your hands. Turnigy makes life easier with their BigGrip connector adapters. These handy adapters mount to your T-Plug and give you a textured, larger surface area to grip the connector when disconnecting power. This saves you frustration, and eliminates any need to tug on the wires themselves. Each adapter is two pieces, and is attached using a small dab of glue.

We suggest a silicone type sealant glue as this makes the adapter semi-removable without damaging the plastic of the plug should you ever need to service a solder joint.

This set is for T-Plug Females/Male

Also available as:
T-Plug Male
T-Plug Female

Specs:
Plug Type: T-Plug Female/Male
Qty: 12 pieces (6 Male, 6 Female)
Weight: 3g

M2 All Thread Rod 300mm (2 pieces) Great for custom control rods or other DIY projects

The cable tie clip mounting set is the perfect solution for the modeller who likes a neat and tidy install. The clips provide slots for cable ties up to 4mm width and can be simply glued in onto the desired position within your model.

The clips are suitable for fiberglass, foam or wooden models but can be used for almost any application.     

Specs:
Material: ABS Plastic
Weight Per Set: 11g
Fits: 4mm cable ties