Workbench

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

KingKong Self-tightening Prop Adapters (CW/CCW) (2 pairs)

These are designed for KingKong propellers and have two lugs on the bottom side.

Includes:
2 x Self-tightening Prop Adapters (CW)
2 x Self-tightening Prop Adapters (CCW)

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 35mm
Axle diameter: 2mm
Weight: 2.4g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 40mm
Axle diameter: 2mm
Weight: 2.6g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 50mm
Axle diameter: 3mm
Weight: 4.7g

Includes:
5 x wheels

These are very light weight wheels and perfect for parkflyers or other models where you want to keep weight to a minimum.

Specs:
Diameter : 55mm
Axle diameter: 3mm
Weight: 5g

Includes:
5 x wheels

These metal control horns are ideal for large scale models .  The pack includes two control horns and a nylon ball link with nut and bolt.

Specs:
Size: 37mm x 37mm
Weight: 4.7g (one control horn)

For heavy duty and scale applications you can't beat a pull/pull wire control system. Once adjusted correctly pull/pull systems are reliable and accurate and for scale aircraft like a Tiger Moth they certainly add scale realism as well as functionality.  

Pull/pull systems are also great for weight saving over conventional push rods and can be used for awkward and tight areas within fuselages.

Specs:
Wire diameter: 0.8mm
Wire Length: 2 x 1m lengths

Includes:
Wire
4 x pieces of heatshrink
4 x crimps
4 x threaded brass links

These Nylon clevis are suitable for push rods up to 1.5mm and offer a screw lock function for a secure fit.

The Clevis are supplied in packs of 10 and arrive complete with 1.75mm locking screws.

Specs:
Material: Nylon
Length: 15mm
Weight: 0.25g

Nylon Linkage Stopper 0.85 x 1.75 x 6mm (10pcs)

Specs:
Material: Nylon
Fits: 0.85mm Pushrods
Lock Screw: 1.75mm
Body length: 6mm
Weight: 0.11g

Nylon Aileron Control Arm 1.35 x 1.35mm

Specs:
Material: Nylon
Fits: 1.35mm screw threads / 1.35mm push rods
Weight: 0.20g

Medium Sized Nylon Landing Gear Saddle Clamps (10pcs)

Specs:
Material: Nylon
Fits: 1.45mm (wire gauge)
Weight: 0.18g Per Set
Dimensions: 15 x 10mm 

The Boom Stopper will help stop short circuits from blowing your electronics up. Simply plug in the Boom Stopper between the power source, usually your battery, and the components you are wanting to power for the first time. If there is a problem the inline 2A fuse will blow, instead of your components. When the fuse is blown the LED will light up indicating there is a short circuit and the Boom Stopper will reduce the current to a level that won't immediately damage your electronics, giving you time to remove the power supply. 

Nylon XT90 Connectors

Excellent EC5/bullet connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. The XT90 offers a tight fit, ensuring a solid connection for minimal resistance. This means that more power gets from your pack to your power system when compared to other plugs currently on the market.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered.

Don't starve your high-amp power system, switch to XT90 connectors today! 

Specs:
Plug Type: 5mm gold bullet connector in nylon shroud
Current Handling: 90A+ (constant)
Weight: 7.0g

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

This latest addition to the XT60 range provides an integrated mount on the side of the XT60 with a 5mm mounting hole. This can be used to fix it to a drone frame (via a cable tie) or can be mounted to a frame stand-off. It could also be mounted to a battery tray in a plane or boat.

XT150s are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!

Nylon XT90 Connectors

Excellent EC5/bullet connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mold at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. The XT90 offers a tight fit, ensuring a solid connection for minimal resistance. This means that more power gets from your pack to your power system when compared to other plugs currently on the market.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered.

Don't starve your high-amp power system, switch to XT90 connectors today! 

Specs:
Plug Type: 5mm gold bullet connector in nylon shroud
Current Handling: 90A+ (constant)
Weight: Male plug: 7.0g / Female plug: 7.6g

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT150s are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!

The male connector uses a collet style spliced contact area to provide more surface to surface contact than standard gold connectors which use a thin mushroomed sheet as a spring.

Nylon XT90 Connectors

Excellent EC5/bullet connector replacements.

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. The XT90 offers a tight fit, ensuring a solid connection for minimal resistance. This means that more power gets from your pack to your power system when compared to other plugs currently on the market.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered.

Don't starve your high-amp power system, switch to XT90 connectors today! 

Specs:
Plug Type: 5mm gold bullet connector in nylon shroud
Current Handling: 90A+ (constant)
Weight: 7.6g

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

These rare earth magnets are extremely powerful for their size and are manufactured using Neodymium, Iron and Boron. They are amongst the strongest permanent magnets commercially available and are now used in a variety of applications. These magnets are coated with 3 layers of nickel, copper, nickel to reduce corrosion and provide a smooth finish.

These small 10 x 10 x 2mm flat plate magnets have an incredible holding power for their size of 1.18kg (2.6lbs) when in flush contact with a steel plate which makes them the ideal choice where you require something that really needs to stay put. Each magnet has north and south poles on opposing faces.

Specs:
Type: Neodymium rare earth permanent magnet
Dimensions: 10 x 10 x 2mm
Holding Power: 1.18kg (2.6lbs)
Quantity: 10 pieces.

WARNING: DO NOT COMBINE THESE MAGNETS IN ORDERS WITH ELECTRICAL EQUIPMENT.

These rare earth magnets are extremely powerful for their size and are manufactured using Neodymium, Iron and Boron. They are amongst the strongest permanent magnets commercially available and are now used in a variety of applications. These magnets are coated with 3 layers of nickel, copper, nickel to reduce corrosion and provide a smooth finish.

These tiny 5 x 5 x 2mm flat plate magnets have an incredible holding power for their size of .46kg (1.02lbs) when in flush contact with a steel plate which makes them the ideal choice where you require something that really needs to stay put. Each magnet has north and south poles on opposing faces.

Specs:
Type: Neodymium rare earth permanent magnet
Dimensions: 5 x 5 x 2mm
Holding Power: .46kg (1.02lbs)
Quantity: 10 pieces.

WARNING: DO NOT COMBINE THESE MAGNETS IN ORDERS WITH ELECTRICAL EQUIPMENT.

These rare earth magnets are extremely powerful for their size and are manufactured using Neodymium, Iron and Boron. They are amongst the strongest permanent magnets commercially available and are now used in a variety of applications. These magnets are coated with 3 layers of nickel, copper, nickel to reduce corrosion and provide a smooth finish.

These small 20 x 10 x 2mm flat plate magnets have an incredible holding power for their size of 1.9kg (4.2lbs) when in flush contact with a steel plate which makes them the ideal choice where you require something that really needs to stay put. Each magnet has north and south poles on opposing faces.

Specs:
Type: Neodymium rare earth permanent magnet
Dimensions: 20 x 10 x 2mm
Holding Power: 1.9kg (4.2lbs)
Quantity: 10 pieces.

WARNING: DO NOT COMBINE THESE MAGNETS IN ORDERS WITH ELECTRICAL EQUIPMENT.

These rare earth magnets are extremely powerful for their size and are manufactured using Neodymium, Iron and Boron. They are amongst the strongest permanent magnets commercially available and are now used in a variety of applications. These magnets are coated with 3 layers of nickel, copper, nickel to reduce corrosion and provide a smooth finish.

These tiny 5 x 2 x 2mm rectangular magnets have an incredible holding power for their size of 0.24kg (0.53lbs) when in flush contact with a steel plate which makes them the ideal choice where you require something that really needs to stay put. Each magnet has north and south poles on opposing faces.

Specs:
Type: Neodymium rare earth permanent magnet
Dimensions: 5 x 2 x 2mm
Holding Power: 0.24kg (0.53lbs)
Quantity: 10 pieces.

WARNING: DO NOT COMBINE THESE MAGNETS IN ORDERS WITH ELECTRICAL EQUIPMENT.