Workbench

115mm Female JST-SH 1.0mm to Twin Male Molex 1.25 Y Lead

105mm Female Molex 1.25 to Twin Male JST-SH 1.0mm Y Lead

JR Male to 2 x JST(Molex) Female 1.00mm (1pc)

This lead converts 2 x JST(Molex) 1.00mm pitch plugged devices to 1 x JR type male plug.

Specs:
Female Plug: 2 x JST(Molex) 1.00mm pitch
Male Plug: JR type
Length Overall: 123mm
Length Each Tail: 46mm

Micro JST(Molex) 1.0mm Pitch Y Lead (1pc)

Y lead for 2 x micro JST(Molex) plugged servo's or ESC.

Specs:
Male Plug: 2 x JST(Molex) 1.00mm pitch
Female Plug: 1 x JST(Molex) 1.00mm pitch
Length Overall: 105mm
Length Each Tail: 43mm

4.0mm to 4.0mm Gold Male to Male Adaptor (5pc)

Mini black T Connector pack (5 Pairs)

Specs:
Base Dimensions: 5mm x 8mm
Contact Dimension: 3mm x 5mm x 1mm
Rating: 10amps continuous

Mini T-connector charge lead with 4mm banana plugs.

Specs:
Weight: 15g
Lead Length: 300mm
Wire Gauge: 16AWG

A handy adapter to convert an EC5 equipped battery to a T Plug connector. Useful for use with a T plug equipped ESC or Charge lead.

Spec:
Weight: 11g(Each)

T-Connector to EC5 Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a EC5 Plug for use with a EC5 equipped ESC or an EC5 Charge lead.

T-Connector to HXT4mm Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a HXT4mm for use with a HXT4mm equipped ESC or an HXT4mm Charge lead.

A handy adapter to convert an XT60 equipped battery to an MPX style connector. Useful for use with MPX equipped ESC or Charge leads.

Spec:
Weight: 5.3g(Each)

A simple way to connect two XT90 equipped battery packs in parallel.

Spec:
Dimensions: 48 x 22 x 22mm  
Weight: 25g (each)

A handy adapter to convert an XT90 equipped battery to a T connector. Useful for use with a T connecter equipped ESC or Charge lead.

Spec:
Weight: 11.6g(Each)

A handy adapter to convert a T plug equipped battery to an XT90 connector. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 10.6g(Each)

HXT 4mm bullet to XT90 Battery Adapter (2pcs)

This adapter will convert a 4mm bullet equipped battery to a XT90 for use with a XT90 equipped ESC or a XT90 Charge lead.

XT90 to 4.0mm bullet Battery Adapter (2pcs/bag)

This adapter will convert a XT90 equipped battery to a 4.0mm bullet for use with a 4.0mm bullet equipped ESC or a 4.0mm bullet Charge lead.

A handy adapter to convert an EC5 equipped battery to an XT90 connector. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 16.6g(Each)

A handy adapter to convert an XT90 equipped battery to an EC5 connector. Useful for use with an EC5 equipped ESC or Charge lead.

Spec:
Weight: 15.3g(Each)

A handy adapter to convert an XT90 equipped battery to an XT60 plug. Useful for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 12g(Each)

A handy adapter to convert an XT60 equipped battery to an XT90 plug. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 12g(Each)

A handy adapter to convert an XT60 equipped battery to an EC5 plug. Useful for use with an EC5 equipped ESC or Charge lead.

Spec:
Weight: 11g(Each)

HXT3.5mm to XT60 Battery Adapter (2pcs/bag)

This adapter will convert a HXT3.5mm equipped battery to a XT60 for use with a XT60 equipped ESC or a XT60 Charge lead.

A handy adapter to convert an EC5 equipped battery to an HXT 4mm connector. Useful for use with an HXT 4mm equipped ESC or Charge lead.

Spec:
Weight: 17.6g(Each)

A simple way to connect two EC5 equipped battery packs in parallel.

Spec:
Dimensions: 57 x 20 x 20mm  
Weight: 26.8g (each)

HXT4mm to EC3 Battery Adapter (2pcs/bag)

This adapter will convert a HXT4mm equipped battery to a EC3 Plug for use with a EC3 equipped ESC or a EC3 Charge lead.

A JST male plug to 2.54mm pitch male jumper lead for a variety of uses.

This lead is the best solution for batteries that are slightly out of balance; simply plug it into the individual cells on the balance lead, select a 1S charge rate and you can charge them one at a time to ensure they are all at optimum charge. 

Only use this method to restore cells that are slightly out of balance and remember that there could be something wrong with one of the cells so keep a close eye on it while charging.

Overall length: 70mm

This is a great way to avoid power shorts.

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

Rated to 20Amp these connectors are an excellent replacement for JST plugs on todays small yet high C rated batteries.

Anderson Powerpole Compatible PA45 Tube (10pcs/bag)

EC3 Male - Tamiya Female 

Welcome to the new "best thing ever" for your workbench - The Mr Grippy soldering jig!

Mr Grippy is extremely well thought out with a spring loaded sliding action; Carbon Fibre construction and supplied with rubber 'feet' to stop him sliding around on your workbench - He grips!

He has 2 pairs vertical alloy posts to clamp your wires in place, these posts have a 1 inch gap between each pair - allowing you plenty of working space.

But that is not all!

Next we have a rectangular self-clamping slot - this slot allows the jig to firmly hold male or female  XT60 or Deans connectors in place making for neat and easy soldering.

Last but not least there is a pair of round holes to suit bullet connectors, making soldering ESC's or Battery connectors a breeze!

Caution: Carbon conducts electricity - Never place 2 plugs from the same battery pack in Mr Grippy simultaneously or he will get very hot under the collar!!

Dimensions: 70x60x30
Weight: 61g

JST SM 2 Pins Plug (Male To Female) 
Soft, high strand Silicon Wire (10cm)
Male and Female included.

3.5mm Gold connectors.
Rated to around 80A

Package contains 10 PAIRS (20PC) of connectors.

2mm Gold connectors.

Package contains 10 PAIRS of connectors. (20pc)

4mm Gold connectors.

Package contains 10 PAIRS of connectors.

Need to repair crash damage to a Multi-rotor flight board or add pin outs to any other electronics project?

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's). They are supplied in 30 pin lengths which can be easily cut to seperate individual pins.

There are 5 strips per pack.