Workbench

Micro JST(Molex) 1.0mm Pitch Y Lead (1pc)

Y lead for 2 x micro JST(Molex) plugged servo's or ESC.

Specs:
Male Plug: 2 x JST(Molex) 1.00mm pitch
Female Plug: 1 x JST(Molex) 1.00mm pitch
Length Overall: 105mm
Length Each Tail: 43mm

4.0mm to 4.0mm Gold Male to Male Adaptor (5pc)

Mini black T Connector pack (5 Pairs)

Specs:
Base Dimensions: 5mm x 8mm
Contact Dimension: 3mm x 5mm x 1mm
Rating: 10amps continuous

Mini T-connector charge lead with 4mm banana plugs.

Specs:
Weight: 15g
Lead Length: 300mm
Wire Gauge: 16AWG

A handy adapter to convert an EC5 equipped battery to a T Plug connector. Useful for use with a T plug equipped ESC or Charge lead.

Spec:
Weight: 11g(Each)

T-Connector to EC5 Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a EC5 Plug for use with a EC5 equipped ESC or an EC5 Charge lead.

T-Connector to HXT4mm Battery Adapter (2pcs/bag)

This adapter will convert a T-Connector equipped battery to a HXT4mm for use with a HXT4mm equipped ESC or an HXT4mm Charge lead.

A handy adapter to convert an XT60 equipped battery to an MPX style connector. Useful for use with MPX equipped ESC or Charge leads.

Spec:
Weight: 5.3g(Each)

A simple way to connect two XT90 equipped battery packs in parallel.

Spec:
Dimensions: 48 x 22 x 22mm  
Weight: 25g (each)

A handy adapter to convert an XT90 equipped battery to a T connector. Useful for use with a T connecter equipped ESC or Charge lead.

Spec:
Weight: 11.6g(Each)

A handy adapter to convert a T plug equipped battery to an XT90 connector. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 10.6g(Each)

HXT 4mm bullet to XT90 Battery Adapter (2pcs)

This adapter will convert a 4mm bullet equipped battery to a XT90 for use with a XT90 equipped ESC or a XT90 Charge lead.

XT90 to 4.0mm bullet Battery Adapter (2pcs/bag)

This adapter will convert a XT90 equipped battery to a 4.0mm bullet for use with a 4.0mm bullet equipped ESC or a 4.0mm bullet Charge lead.

A handy adapter to convert an EC5 equipped battery to an XT90 connector. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 16.6g(Each)

A handy adapter to convert an XT90 equipped battery to an EC5 connector. Useful for use with an EC5 equipped ESC or Charge lead.

Spec:
Weight: 15.3g(Each)

A handy adapter to convert an XT90 equipped battery to an XT60 plug. Useful for use with an XT60 equipped ESC or Charge lead.

Spec:
Weight: 12g(Each)

A handy adapter to convert an XT60 equipped battery to an XT90 plug. Useful for use with an XT90 equipped ESC or Charge lead.

Spec:
Weight: 12g(Each)

A handy adapter to convert an XT60 equipped battery to an EC5 plug. Useful for use with an EC5 equipped ESC or Charge lead.

Spec:
Weight: 11g(Each)

HXT3.5mm to XT60 Battery Adapter (2pcs/bag)

This adapter will convert a HXT3.5mm equipped battery to a XT60 for use with a XT60 equipped ESC or a XT60 Charge lead.

A handy adapter to convert an EC5 equipped battery to an HXT 4mm connector. Useful for use with an HXT 4mm equipped ESC or Charge lead.

Spec:
Weight: 17.6g(Each)

A simple way to connect two EC5 equipped battery packs in parallel.

Spec:
Dimensions: 57 x 20 x 20mm  
Weight: 26.8g (each)

HXT4mm to EC3 Battery Adapter (2pcs/bag)

This adapter will convert a HXT4mm equipped battery to a EC3 Plug for use with a EC3 equipped ESC or a EC3 Charge lead.

A JST male plug to 2.54mm pitch male jumper lead for a variety of uses.

This lead is the best solution for batteries that are slightly out of balance; simply plug it into the individual cells on the balance lead, select a 1S charge rate and you can charge them one at a time to ensure they are all at optimum charge. 

Only use this method to restore cells that are slightly out of balance and remember that there could be something wrong with one of the cells so keep a close eye on it while charging.

Overall length: 70mm

This is a great way to avoid power shorts.

Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

Rated to 20Amp these connectors are an excellent replacement for JST plugs on todays small yet high C rated batteries.

MPX Connector to T-Connector Battery Adapter Lead(2pcs)

This adapter will convert a MPX Connector equipped battery to a T-Connector for use with an T-Connector equipped ESC or an T-Connector Charge lead.

2mm Gold connectors with cut away for easy soldering

Package contains 10 PAIRS of connectors. (20pc)

Spec.
Length: 12.5mm(Each)
Diameter: 2mm
Weight: 0.4g(Pair)

XT90 Battery Harness 10AWG for 2 Packs in Series

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT90 Battery Harness 10AWG for 2 Packs in Parallel

IMPORTANT: "These are not cheap copied XT90 plugs. These original Nylon XT90 plugs, manufactured by AMASS, can handle over 90A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT90 plugs."

XT150s are big 6mm sprung gold connectors that have a large contact area, making them great for high power applications up to 250A!

4mm Gold Connectors - Low Profile (10pc)

Ideal for use with Hardcase packs for RC cars these plugs will allow you to fit your battery in the tightes of battery compartments.

Low Profile Bullect Connectors are preferred by racers world wide.

Pro Tip: If you find the bullets hard to plug in to your battery take a set of needle nose pliers and gently squeeze two of the four prongs, turn the plug and repeat on the other two prongs. If the plug is too loose take a small Phillips head screw driver and gently force the prongs open a little until you have a snug fit.

2.1mm - 5.5mm DC Chassis Socket Jack (2pc)

Specs:
Outside Dia: 5.5mm
Inside Dia: 2.1mm
Connector: Socket.
Connector Type: Female/DC
Connection: Solder type

2.5mm - 5.5mm DC Chassis Socket Jack (2pc)

Specs:
Outside Dia: 5.5mm
Inside Dia: 2.5mm
Connector: Socket.
Connector Type: Female/DC
Connection: Solder type

Molex 2 Pin Cable Female Connector with 220mm x 26AWG Wire.

Specs:
Connector: Molex 2 pin
Colour: Black, Red
Length: 220mm

Molex 3 Pin Cable Male Connector with 220mm x 26AWG Wire

Specs:
Connector: Molex 3 pin
Colour: Black, Yellow, Red
Length: 220mm

7mm AS150 Anti Spark Self Insulating Bullet Connector (2 Pairs)

This connector features an insulated tip to stop big sparks from higher voltage applications. This coupled with the plastic self insulating shroud offers a safe and affective connector package with no shrink tube needed.