Workbench

Solder Wire 1mm/3m - 17g,  63% Tin Content

The perfect transport/storage option for your precious R/C transmitter!

The Turnigy Transmitter Bag features lightweight construction, yet is rigid enough to protect your radio during normal transport. It has dual zippers, a removable carrying strap and pockets inside to accommdate a wide variety of accessories such as spare TX battery, charger, neck strap and more!

Two self adhesive foam blocks are included on the inside for accommdating your specific transmitter shape. They feature a hook & loop backing so they can be moved to whichever position you need very quickly and easily. There is even a hook & loop strap integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g

The Hole Tapping Jig Set has been specifically designed for use with the RotorBits square 10mm tube. The jig slides neatly onto the square tube and can be secured with 4 locking screws (included) which will prevent the jig slipping once located in the preferred position.

The hole tapping jig set also includes a hole reamer, 2mm drill bit and 2mm thread tap.

Specs:
Jig Material: Steel
Jig Weight: 154g
Jig Dimensions: 100 x 16 x 20mm
Supplied Tools: Hole reamer, 2mm drill bit, 2mm thread tap

Soldering Station with Adjustable Heat Range

Specs Power Supply:
Power Consumption: 60W
Input Voltage: 110v
Output Voltage: 24v AC
Dimensions: 170mmx93mmx20mm
Temperature Range: 200c~480c/392F~896F

Specs Soldering Iron:
Power Consumption: 24v Ac-50w
Heating Element: Ceramic
Cord Length: 1.2m

R/C Helicopter Pitch Gauge, a must for when setting up your RC helicopter.

Specs:
Range: +12°, -12°
Material: Plastic
Suits: Most mini-helicopters

Remember the last time you were at the field and needed to make a quick repair to your foamy? This handy battery powered hot glue gun would have been just the tool for the job.

Operating on 12VDC, this glue gun can be powered by any standard 3S lipoly battery. It comes pre-fitted with an XT60 plug allowing you to easily connect to your Turnigy/Zippy lipoly battery. Everyone has a 3S 2200mAh battery in their field box, so you'll always have power for your hot glue gun. This tool is a must have for any flight box!

*Note: This glue gun does not feature a low voltage cutoff circuit, so we recommend using a low voltage battery alarm to monitor the input battery to avoid over-discharging. Please see related items below.

Specs:
Operating Voltage: 12VDC
Power: 10W
Power Plug: XT60

A lightweight, highly adaptable model aircraft stand, ideal for building, field assembly and storage of all but the largest of models (We've used these for models up to 2m long without any problems.)

The interlocking, all foam stand assembles in seconds, is flexible, strong and will not leave marks on your model.

Specs:
Length: 580mm
Width: 300mm
Height: 355mm
Weight: 530g

Ever wanted to know how fast your motor is spinning?
Wished you could better select the right propeller for your motor?
Now you can more accurately tune and performance test your engine, motor, edf or heli with the Turnigy tachometer.

Measures 2 to 9 propellers.
Super easy to use.
0-99999rpm range

Features:
Ultra sharp backlit LCD
220mah Lion battery included
Auto shut-off when idle. (no more flat batteries)
Weighs only 39g.

Tired of wrestling with two pairs of pliers or using a vise to help you try and obtain that perfect Z-bend for your control rods, only to end up with a half formed S shaped bend with too much middle in it for a Z bend allowing your control surfaces to slop around? Sound like some of the Zs you have made?
These pliers will give you a perfect bend, every time. It will handle toughened wire up to 1/16 (1.6mm) diameter.
These are heavy duty pliers, not small hobby workshop tools.

Get your Z-bends easy and perfect every time with the Z-Bend Pliers!

The HobbyKing helicopter pitch gauge is made from ultra-rigid fiberglass board and features dual ball bearings to ensure accurate measurements every time. This pitch gauge is supplied in kit form to keep production costs down which means we can pass the savings on to you!

Specs:
Measurement: +/- 20 Deg
Size: 145mm x 105mm
Max Blade Width: 80mm

Note: An assembly guide can be found in the FILES tab below.

Cut in style with your very own HobbyKing Cutting mat.
Perfect for protecting your work surface and keeping your hobby knife sharp.

Size: L450mm × W300mm (18"x12")

This extendable magnetic pick-up tool is a great addition to any toolbox, it makes picking up small metal parts that fall in hard to reach places extremely easy.

Specs:
Magnet Diameter: 7mm
Extended Length: 635mm
Magnet Strength: 1.5kg lift capacity

Welcome to the new "best thing ever" for your workbench - The Mr Grippy soldering jig!

Mr Grippy is extremely well thought out with a spring loaded sliding action; Carbon Fibre construction and supplied with rubber 'feet' to stop him sliding around on your workbench - He grips!

He has 2 pairs vertical alloy posts to clamp your wires in place, these posts have a 1 inch gap between each pair - allowing you plenty of working space.

But that is not all!

Next we have a rectangular self-clamping slot - this slot allows the jig to firmly hold male or female  XT60 or Deans connectors in place making for neat and easy soldering.

Last but not least there is a pair of round holes to suit bullet connectors, making soldering ESC's or Battery connectors a breeze!

Caution: Carbon conducts electricity - Never place 2 plugs from the same battery pack in Mr Grippy simultaneously or he will get very hot under the collar!!

Dimensions: 70x60x30
Weight: 61g

These replacement drivers have been specifically designed to fit the Turnigy high quality drivers and drive sets (rubber handled type). The replacement shafts are manufactured from high tensile steel and are hard coated to prevent corrosion.

Specs:
Drive Type: Flat head screwdriver
Tip Size: 5mm
Shaft Diameter: 5mm
Shaft Length: 120mm
Weight: 17.06g

Handy large brush with coarse nylon bristles and wooden handle suitable for painting or cleaning.

Specs:
Diameter: 27mm
Length: 280mm
Bristles: Coarse nylon
Handle: Wood

The ever popular Turnigy Watt Meter just got an upgrade

There is no better or easier way for you to measure your power system than by using a watt meter. This handy little device takes the guess work out of it by reliably and accurately measuring watts amps and volts. 

If a watt meter saves you just one motor or ESC then its paid for itself. We've all seen someone burn a motor or ESC at the track/field with a new prop or pinon. You can avoid the disappointment of a failed power system by ensuring your setup is within the limits of the componentry   

Advantages:
Ensure peak currents are within tolerance for your power system
Check battery health and performance.
Evaluate R/C battery charging efficiency.  
Choose the best propeller or gearing and the most efficient motor  
Check for wiring and connector power losses  
Measure power and energy consumption of any device with a battery
Specs:
Operating voltage: 0v~60V (0V Requires external battery)
Operating voltage: 4.6~60V 

Measures:
0~180A - Resolution 0.01A
0~60V - Resolution 0.01V
0~10800W - Resolution 0.1W
0~99Ah - Resolution 0.001Ah
0~9999.9Wh - Resolution 0.1Wh
Screen: 16x2, backlit LCD display
Size: 85 x 42 x 25mm
Weight: 82g

Soldering Iron Tip Set (10 pcs)

Suits Hakko type soldering irons that have an attachment spigot diameter of 4mm. Containing fine tips to bevel edges, this pack has you covered for the majority of hobby projects from PCB soldering to battery connectors. 

The ideal solution for keeping your RC planes protected when storing and transporting them. Made with strong, colorful polyester materials, the tote bags also include an additional large storage pocket and wing pocket. These tote bags are padded, lined, and fitted with heavy-duty zippers, plus a carry strap. 

The Turnigy glider bag backpack is great for securely carrying your glider to a remote slope location, where your parking area is far from your flying area. Just strap it to your back and go! Made of durable 600 denier nylon, this wing bag is designed to handle every day use for years to come.

A main compartment holds your wings and fuselage, while a separate compartment holds your transmitter or other accessories. There is even a compartment designed specifically to hold your wing tubes. The compartments are closed with drawstrings and the shoulder straps adjust to fit any size person.

Perfect for 2 meter or larger sailplanes. For smaller sailplanes take a look at our smaller Turnigy Glider Backpack

Specs:
Main Compartment Size: 1300 x 310 x 70mm
Accessory Compartment Size: 200 x 170 x 120mm

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

Replacement 1.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 3.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head.