Workbench

The HobbyKing helicopter pitch gauge is made from ultra-rigid fiberglass board and features dual ball bearings to ensure accurate measurements every time. This pitch gauge is supplied in kit form to keep production costs down which means we can pass the savings on to you!

Specs:
Measurement: +/- 20 Deg
Size: 145mm x 105mm
Max Blade Width: 80mm

Note: An assembly guide can be found in the FILES tab below.

Cut in style with your very own HobbyKing Cutting mat.
Perfect for protecting your work surface and keeping your hobby knife sharp.

Size: L450mm × W300mm (18"x12")

This extendable magnetic pick-up tool is a great addition to any toolbox, it makes picking up small metal parts that fall in hard to reach places extremely easy.

Specs:
Magnet Diameter: 7mm
Extended Length: 635mm
Magnet Strength: 1.5kg lift capacity

Welcome to the new "best thing ever" for your workbench - The Mr Grippy soldering jig!

Mr Grippy is extremely well thought out with a spring loaded sliding action; Carbon Fibre construction and supplied with rubber 'feet' to stop him sliding around on your workbench - He grips!

He has 2 pairs vertical alloy posts to clamp your wires in place, these posts have a 1 inch gap between each pair - allowing you plenty of working space.

But that is not all!

Next we have a rectangular self-clamping slot - this slot allows the jig to firmly hold male or female  XT60 or Deans connectors in place making for neat and easy soldering.

Last but not least there is a pair of round holes to suit bullet connectors, making soldering ESC's or Battery connectors a breeze!

Caution: Carbon conducts electricity - Never place 2 plugs from the same battery pack in Mr Grippy simultaneously or he will get very hot under the collar!!

Dimensions: 70x60x30
Weight: 61g

These replacement drivers have been specifically designed to fit the Turnigy high quality drivers and drive sets (rubber handled type). The replacement shafts are manufactured from high tensile steel and are hard coated to prevent corrosion.

Specs:
Drive Type: Flat head screwdriver
Tip Size: 5mm
Shaft Diameter: 5mm
Shaft Length: 120mm
Weight: 17.06g

Handy large brush with coarse nylon bristles and wooden handle suitable for painting or cleaning.

Specs:
Diameter: 27mm
Length: 280mm
Bristles: Coarse nylon
Handle: Wood

The ever popular Turnigy Watt Meter just got an upgrade

There is no better or easier way for you to measure your power system than by using a watt meter. This handy little device takes the guess work out of it by reliably and accurately measuring watts amps and volts. 

If a watt meter saves you just one motor or ESC then its paid for itself. We've all seen someone burn a motor or ESC at the track/field with a new prop or pinon. You can avoid the disappointment of a failed power system by ensuring your setup is within the limits of the componentry   

Advantages:
Ensure peak currents are within tolerance for your power system
Check battery health and performance.
Evaluate R/C battery charging efficiency.  
Choose the best propeller or gearing and the most efficient motor  
Check for wiring and connector power losses  
Measure power and energy consumption of any device with a battery
Specs:
Operating voltage: 0v~60V (0V Requires external battery)
Operating voltage: 4.6~60V 

Measures:
0~180A - Resolution 0.01A
0~60V - Resolution 0.01V
0~10800W - Resolution 0.1W
0~99Ah - Resolution 0.001Ah
0~9999.9Wh - Resolution 0.1Wh
Screen: 16x2, backlit LCD display
Size: 85 x 42 x 25mm
Weight: 82g

Soldering Iron Tip Set (10 pcs)

Suits Hakko type soldering irons that have an attachment spigot diameter of 4mm. Containing fine tips to bevel edges, this pack has you covered for the majority of hobby projects from PCB soldering to battery connectors. 

The ideal solution for keeping your RC planes protected when storing and transporting them. Made with strong, colorful polyester materials, the tote bags also include an additional large storage pocket and wing pocket. These tote bags are padded, lined, and fitted with heavy-duty zippers, plus a carry strap. 

The Turnigy glider bag backpack is great for securely carrying your glider to a remote slope location, where your parking area is far from your flying area. Just strap it to your back and go! Made of durable 600 denier nylon, this wing bag is designed to handle every day use for years to come.

A main compartment holds your wings and fuselage, while a separate compartment holds your transmitter or other accessories. There is even a compartment designed specifically to hold your wing tubes. The compartments are closed with drawstrings and the shoulder straps adjust to fit any size person.

Perfect for 2 meter or larger sailplanes. For smaller sailplanes take a look at our smaller Turnigy Glider Backpack

Specs:
Main Compartment Size: 1300 x 310 x 70mm
Accessory Compartment Size: 200 x 170 x 120mm

Static Control Crank Handle Brushes are ideal for cleaning electronic components and prevent static build up that can potentially damage the components.

Specs:
Surface Resistance: 10⁴-10⁶ Ohm
Bristle Dimensions: 60 x 20mm
Handle Dimensions: 170 x 10mm 

Protect your covering and the coating on your heat sealing iron with this easy to fit sock. Suits most standard model heat sealing irons.

Tamiya Mini bending Pliers are perfect for small photo-etched parts which have no identifiable bending lines. The easy grip handle provides comfortable use whilst maintaining maximum control. The pliers allow you to bend straight lines up to 20mm.

Specs:
Nose Length: 20mm
Overall Length: 130mm
Weight: 49.13g 

Tamiya premium quality, clog free, wet and dry sanding paper. Ideal for modelers looking for the perfect finish. The pack contains 2 x P180, 1 x P240, 2 x P320. 

Specs:
Grades: P180, P240, P320
Dimensions: 229 x 93mm
Quantity: 5 pcs

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 20mm
Handle Material: Hardwood
Weight: 4.41g
Dimensions: 220 x 7mm

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 11mm
Handle Material: Hardwood
Weight: 2.86g
Dimensions: 220 x 5mm

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 7mm
Handle Material: Hardwood
Weight: 1.4g
Dimensions: 210 x 4mm

Tamiya Standard Flat Brushes are made from horse hair and feature lightweight hardwood handles. Ideal for painting larger surface areas of models.

Specs:
Bristle Material: Horse hair
Bristle Length: 7mm
Handle Material: Hardwood
Weight: 1.8g
Dimensions: 210 x 5mm

Tamiya Standard Blunt Brushes are made from horse hair and feature lightweight hardwood handles. The brushes are ideal for fine detailed artwork.

Specs:
Bristle Material: Horse hair
Bristle Length: 7mm
Handle Material: Hardwood
Weight: 2.22g
Dimensions: 200 x 5mm

Tamiya High Finish Flat Brushes are made from polybutylene terephthalate and feature lightweight bamboo handles. The brushes are ideal for fine detailed artwork.

Specs:
Bristle Material: Polybutylene terephthalate
Bristle Length: 7mm
Handle Material: Bamboo
Weight: 2.5g
Dimensions: 180 x 5mm

Turnigy 1/2" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

Turnigy 3/8" Hex Socket Screwdriver
Ultra strong steel tip, wont break or round like other cheap drivers.
Lightweight, hollow alloy handle means it wont weigh down your R/C gear case.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.

Replacement 1.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Hex drive tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 2.5mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 3.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

Replacement 4.0mm Arm Reamer Tip for Turnigy V2 series drivers.  The shafts are manufactured from spring steel to provide superior durability and a tight clean fit in the screw head. 

The Turnigy V2 range of drivers: comfortable, high quality, precision tools at a price that can't be beaten.