Servos

TGY-390DMH High Performance Digital Servo (Extra Strong) 5.4kg / .11sec / 22.5g

Specification:
Weight: 22.5 grams / 0.79 oz.
Dimensions: 29 x 13 x 30 mm / 1.14 x 0.51 x 1.18 inch
Torque @ 4.8V: 4.6 kg/cm , 64 oz/in
Torque @ 6.0V: 5.4 kg/cm , 75 oz/in
Speed @ 4.8V: 0.14sec / 60 deg at no load
Speed @ 6.0V: 0.11sec / 60 deg at no load

Twin ball bearing and full metal gears. High performance servo recommended for Airplane & Helicopter (Tail)

Mini analog servo.
Precise, jitter free response for small parkflyers or light 3D.

Model: TR-1160A
Voltage: 6v
Speed: 0.11sec
Torque: 2.1kg/cm
Weight: 16g
Size: 29.6x28x13.2mm
Spline Count: 25

Specs:
Model: TGY-225MG
Voltage: 4.5 - 6v
Speed: .12s
Running Current: 180mA
Torque: 3.5kg/cm
Gears: Metal
Weight: 26g
Spline Count : 21 Tooth

Narrow dead band width.

The HX5010 servo won't break any records, it won't astound you with its amazing torque or scare your friends with its ninja-like high-speed action, but it is a solid, reliable plastic gear servo that's economical and great for those that are not too serious about the specification.

HX5010 servos shipped as of Aug 1, 2014, are digital versions, no longer analog. Same great price, and even better performance!

HXT500, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT500 is the #1 trusted low-cost 5g servo.

Features:
• Teflon bushing
• 15cm wire
• Coreless motor
• Servo arms & screw included

Specs:
Size: 21.3x11.5x22 mm
Voltage: 4.8v ~ 6v
Weight: 6.2g
Speed: 0.10 sec/60(4.8V)
Torque: 1.2kg-cm
Working Temp: -30C~60C
Gears: Plastic

WARNING
These servos can be found on eBay and other asian seller stores at close to this price, however be warned, they do not contain Taiwan/Japan components. The manufacturers of these servos have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere!

HXT900, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT900 is the #1 trusted low-cost 9.8g servo.

Features:
• Teflon bushing
• 25cm wire
• Coreless motor
• Servo arms & screw included

Specs:
Size : 23x12x23 mm / 0.9x0.47x0.9 in
Voltage : 3v ~ 6v
Weight: 9.8g / 0.35oz
Speed: 0.12 sec/60(4.8V)
Torque : 1.6kg-cm
Working Temp: -30C~60C
Gears: Nylon White type

WARNING
Similar-looking servos can be found on eBay and other Asian sellers. However be warned, they do not contain Taiwan/Japan components. The manufacturers of these servos have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere!

This is essentially an upgraded version of the famous Towerpro MG995 servo. It now has a redesigned PCB and IC control system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
All specifications are the same as the previous model MG995, however, this servo is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering.

Corona DS-929MG is a fantastic small powerful servo. Extremely popular with good speed and metal gear. A cost effective digital servo for small RC planes, cars and boats or updating plastic gear servos with metal gear ones. Precise control and minimal dead-band width, they are an excellent choice and recommended by our own electrical engineer, Nick.

Corona CS238MG Metal Gear Servo 4.6kg / 0.14sec / 22g

Corona 939MG Metal Gear Servo 2.5kg / 0.14sec / 12.5g

Corona DS329MG Digital Metal Gear Servo 3.8kg / 0.11sec / 32g

Corona DS339MG Digital Metal Gear Servo 4.4kg / 0.15sec / 32g

Corona 919MG Metal Gear Servo 1.7kg/ 0.06sec / 12.5g

Micro analog servo.
Precise, jitter free response for small parkflyers or light 3D.

The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!

Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.

Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!

Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mm

Mount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mm

Not suitable for a plane heavier than 2kg
Strut & Landing gear not included

Don't let the price fool you. This is a decent analog servo and the colour is, well, different.
No longer will you goose step to the blue or black servo crowd, get a HobbyKing HK15178!

Spec:
Torque: 1.2kg/cm @ 4.8v, 1.4kg/cm @ 6v
Weight: 10g
Speed: 0.10/60deg @ 4.8v, 0.09/60deg @ 6v
Voltage: 4.8v~6v
Plug: JR

HobbyKing 939MG Metal Gear Servo 2.5kg/ 0.14sec / 12.5g
A strong performer with a very smooth movement and good centering.
Excellent for parkflyers or planes up to .40 size (3,500mAh electric).

The Turnigy D56MG HV is great for small 3D planes and parkflyers where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price. The HV voltage lets you use a 2s Lipo or LiFE battery directly with no need for a BEC.

The Turnigy D56LV is great for small gliders and DLGs, or just about any other mini airplane using single cell LiPoly batteries (3.7V) and where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price.

Turnigy analog micro servo offering good torque, high speed, excellent centering and a great price!

The strong gear train is all metal geared.

Specs:
Weight: 9g
Size: 23.1mmx12.0mmx25.9mm
Torque: 1.6kg.cm (4.8v)2 kg.cm (6.0v)
Speed: 0.08 sec/60deg (4.8v)0.07 sec/deg (6.0v) 
Voltage: 4.8-6.0v
Type: Analog Micro
Gear Train: Metal
Ball Bearing: No
Lead Length: 240mm
Plug: JR/Futaba
Spline Count: 20