Radios

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

Want to experience the efficiency, long range, and low latency of the ELRS protocol without purchasing a new radio? Then RADIOMASTER has you covered!

The Ranger Nano 2.4GHz ELRS module represents the cutting edge in ELRS technology, and it's compatible with the RADIOMASTER Zorro series and more. It features F-1000Hz refresh rates, a high-efficiency cooling system, WiFi, and Bluetooth connectivity, and a T antenna. Enjoy all that ELRS has to offer with a RADIOMASTER Ranger Nano TX module.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RADIOMASTER MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by the EdgeTX and ExpressLRS multi-module project. The MT12 is available as either an ELRS or 4-in-1 multi-module version (see specs) and boasts 10 physical inputs, and the capability to handle either 16 or 32 channels (4-in-1 version only). The ELRS (ExpressLRS) version is designed to provide a reliable long-range, ultra-fast response, super low latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm. Each version is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The Turnigy TGY-i6 is a great entry-level 6-channel telemetry 2.4ghz computer transmitter that uses solid and reliable Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology. The Turnigy TGY-i6 has both a nice quality look and feel, while the programming is simple to use. The TGY-i6 also has an impressive list of features and includes a TGY-iA6 6-channel receiver. Suitable for both model helicopters and airplanes, the Turnigy TGY-i6 is a superb budget computer radio for both new and experienced pilots!

Compatible with Futuba Fasst transmitters the Corona R14FA offers an affordable alternative for Futaba radio users.

Specs:
Operating Current:
70mA @ FASST 7ch mode normal and 110 mA max,
80mA @ FASST multi-channel mode normal and 110 mA max
Operating Voltage:  4.0 ~10V
Latency:
7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,
8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode
Sensitivity: ~ -96dBm
Fail Safe: Yes
Size: 53x37x16mm
Weight: 22g
Antenna length: 136mm

Compatibility:
FUTABA FASST 2.4GHz transmitters
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Mount this handy device somewhere on your model where it can be seen clearly and plug it into a spare channel on your receiver, if no channel is available then use a Y lead. This unit will give you a visual check of your LiPoly or LiFe receiver battery each time you switch on. The easy to read series of LED's will show you whether it is safe to carry on or if the battery requires charging.

Specs:
Voltage Range: 6.6~7.4V
Dimensions: 40x21x2.5mm
Weight: 4g
Lead Length: 320mm
Plug: JR type

The RMILEC Adapter Converter Board is the perfect solution to allow easy connection to an SBUS receiver. The T4363NB18 adapter supports 5V power supply and can be used not only for matching 12FG or 14MZ transmitters but can also be individually placed in another location as a relay station.

The board is supplied complete with hardware including, JST battery connectors, on/off switch, terminals, fixtures and fittings.

Please note: soldering of on/off switch and terminals is required.

Specs:
Material: PCB
Weight: 39.65g
Dimensions: 90 x 115mm

FrSky TFR6 7ch 2.4Ghz Receiver FASST Compatible

Compatibility:
FASST 2.4G: Air Systems (7CH Mode/Multi Mode)
FrSky TF Modules: TF-8M, TF-14M


Features:
Light weight and small size
Two selectable failsafe setting options


Specifications:
Number of Channels: 7
Operating Voltage Range: 3.5V~10V
Operating Temperature Range: -10C~60C
Dimension: 37*22*8mm
Weight: 7.8g

The Turnigy Voltage Protector helps prevent your receiver from dropping below its required operating voltage. This helps to eliminate "brownouts" and prevents your receiver from rebooting. It will also help reduce the load on your ESC's BEC and reduce the likelihood of glitching. Simply plug it into any spare channel on your receiver.

Operating Voltage : 3.2V - 11.1V (1s ~ 3s LiPo)
Capacitor voltage: 16v
Storage Capacity: 3300uf
Weight: 6.1g

The FrSky S.BUS to PWM Decoder allows you to use any standard analog or digital servos with your S.BUS compatible receiver. This eliminates the need for using pricey S.BUS specific servos allowing you to use your models existing servos.

Featuring 4 programmable channel outputs, you can independently assign each servo to a channel of your choice while only having to connect one input lead from your receiver. This makes your wiring much more tidy and allows for easy setting up of your servos without the need for running multiple extension leads.

This is a great device to use in conjunction with our Orange 7CH and 9CH S.BUS compatible receivers!

Includes:
FrSky S.BUS to PWM Decoder

Specs:
Channel Outputs: 4 programmable
Channel Ouput Lead Lengths: 200mm
Overall Length: 350mm

*Note: FrSky Servo Channel Changer required (sold separately, see related items below) to change assignment of channel outputs.

Turnigy 9X 2.4GHz 8ch (V2) receiver that is suitable for use with the Turnigy 9X transmitter (V2). Get that locked-in feeling that only the 2.4Ghz glitch-free technology can provide. Ultra-fast reaction times and interference-free control of your model that is only achievable with this latest 2.4Ghz technology.

HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Spare Part - Premium BNC 1.3m RG223 cable for Scherrer Rx700LR Long Range UHF system

Spare Part - RC Adapter Graupner/JR for Scherrer Rx700LR Long Range UHF System

Spare Part - RC Adapter Multiplex for Scherrer Rx700LR Long Range UHF System