The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 1700kv
Poles: 4
Max voltage: 22.2v (6S)
Max Current: 84A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Weight: 270g

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you will not find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 1460kv
Poles: 4
Max voltage: 25.9v (7S)
Max Current: 72A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Weight: 270g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 4074
Number of pole: 4
Motor KV: 2000
Max Current: 120A
Max Voltage: 25V / 6S Lipoly
Case Length: 74mm
Case Dia: 40mm
Shaft Dia: 5.0mm
Total Length: 91mm
Weight: 380g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Weight: 275g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-2200KV
Poles: 4
KV: 2200
Max Current: 70A
Max Voltage: 25.2V/6S Lipo
Max Watts: 1750w
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1900KV
Poles: 4
KV: 1900
Max Current: 61A
Max Voltage: 29.4V/7S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1650KV
Poles: 4
KV: 1650
Max Current: 70A
Max Voltage: 33.6V/9S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK2845-3650KV
Poles: 4
KV: 3650
Max Current: 48A
Max Voltage: 16.8V/4S Lipo
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Specs:
Size: XK2845-1980KV
Poles: 4
KV: 1980
Max Power: 220W
Max Current: 24A
Max Voltage: 33V (2-4S LiPo)
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Spec.:
Size: XK2858-2900KV
Poles: 4
KV: 2900
Max Power: 1300W
Max Current: 58A
Max Voltage: 23V (6S LiPo)
Case Length: 58mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 70mm
Weight: 160g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!
 
Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.
 
The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!
 
Features:               
• CNC Machined Billet T6 Aluminum Motor Can  
• High Purity Copper Windings
• 4mm Bullet Connectors Pre-installed    
• Powerful Sintered Neodymium Magnet    
• Precision Engineered for Maximum Energy Conversion
• Water Cooling Jacket Pre-installed
 
Specs:
RPM/v: 1050kv
Winding: 1.5Y
Max voltage: 22.2V (6S)
Max Current: 160A
Max Watts: 3100W
Resistance: 0.014ohm
No Load Current: 1.4A
Can Diameter: 39mm (actual motor diameter)
Can Diameter inc. Water Jacket: 49mm
Can Length: 84mm
Shaft Size: 5mm
Weight: 490g
Motor Connector: 4mm bullet plug

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!
 
Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.
 
The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!
 
Features:               
• CNC Machined Billet T6 Aluminum Motor Can  
• High Purity Copper Windings
• 4mm Bullet Connectors Pre-installed    
• Powerful Sintered Neodymium Magnet    
• Precision Engineered for Maximum Energy Conversion
• Water Cooling Jacket Pre-installed
 
Specs:
RPM/v: 620kv
Winding: 2.5Y
Max voltage: 37V (10S)
Max Current: 105A
Max Watts: 3050W
Resistance: 0.03ohm
No Load Current: 0.7A
Can Diameter: 39mm (actual motor diameter)
Can Diameter inc. Water Jacket: 49mm
Can Length: 84mm
Shaft Size: 5mm
Weight: 508g
Motor Connector: 4mm bullet plug

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium-grade steel shafts.

Looking for an inexpensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium-grade steel shafts.

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

Looking for an inexpsensive motor replacement for your basher? These are just what the doctor ordered! These sensorless brushless motors are fitted with precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

This original SURPASS HOBBY RocketRC 4082 4-pole marine brushless motor is designed to provide both quality and performance at an affordable price. It is built using high-quality aluminum alloy and has been designed for use with 600~1000mm RC boats. Its high power and rotation speeds provide long run times without compromising performance. This motor is a perfect fit for the Traxxas M41 Catamaran Spartan.

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor
• Built from CNC machined 6061 T6 billet aluminum
• Super thin (0.2mm) laminations stator
• Fitted with a super efficient cooling-jacket