Turnigy L5055B-600 Brushless Outrunner 600kv.

Specs:
Dimension: 50mm x 55mm
Weight: 296g (with 4m connectors)
Kv: 600rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1500w
Max Current: 55A
Max Efficiency: 85% @ 35A
No load Current: 2.6A
Internal Resistance: 0.22
Diameter of shaft: 6mm

Performance Data (4S):
13x10: 595W, 43A, 3150g static thrust
14x8.5: 652W, 47A, 3265g static thrust
15x8: 755W, 55A, 3556g static thrust

Performance Data (6S):
11x8: 885W, 43A, 3668g static thrust
12x7: 1030W, 50A, 4084g static thrust
12x8: 1133W, 55A, 4410g static thrust

Performance Data (8S):
10x6: 1135W, 40A, 3751g static thrust
11x5.5: 1420W, 51A, 4384g static thrust
11x6: 1495W, 54A, 4695g static thrust

Upgrade your 100cc size gas engine model with the Turnigy RotoMax 100cc Brushless outrunner motor. This motor will provide clean and efficient power for your large-scale aircraft without the mess and hassle of fuel.

When combined with a 12s Lipoly battery, 27x12 Propeller, and a 250Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.

Performance Data (12S):
26x10: 5750W, 140A, 17622g static thrust
26x12: 6458W, 159A, 20139g static thrust
27x10: 6333W, 156A, 18960g static thrust
27x12: 7077W, 175A, 21565g static thrust

Upgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor. This motor will provide clean and efficient power for your large-scale aircraft without the mess and hassle of nitro fuel.

When combined with a 10S LiPo battery, a 24x10 to 26x12" propeller, and a 150Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.

Performance Data (10S):
24x10: 2893W, 83A, 11227g static thrust
24x12: 3300W, 95A, 12974g static thrust
26x10: 3632W, 106A, 13315g static thrust
26x12: 4101W, 120A, 15246g static thrust

Performance Data (12S):
22x8: 3031W, 72A, 10488g static thrust
22x10: 3560W, 86A, 12627g static thrust
24x8: 3933W, 95A, 12805g static thrust
26x8: 4915W, 120A, 15150g static thrust

AX-1806N-2100
Micro brushless motor

Factory Spec.
Kv: 2100rpm/v
Lipo Range: 2-3 cell
Suggested prop: 5x3 ~ 6x3
Best current range: 3~7A
Weight: 19g
Shaft: 3mm

Stator: 18 x 6mm

Test Data.
Battery: 11.5v
Current: 7.2A
Propeller: 5x3
Thrust: 337g
Speed: 18570rpm

Super Kinetic - Replacement Brushless Motor (2630-KV1000)

HobbyKing™ Bix3 Trainer 1550mm - Replacement Motor 2630 1400kv

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

 The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

 The 4225-390 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 390
Lipo cells: 6s
Max Surge Watts(W): 330
Working current: 11 amps
Max.current(10s): 15 amps
No Load Current: 0.2 amps
Intemal Resistance: 0.24 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

Looking for the ultimate power system for your next Multi-rotor project? Look no further!

The Turnigy Multistar outrunners are designed with one thing in mind - maximising Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 16 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.

The 4225-610 includes a prop adapter(6mm) and has a built in aluminium mount for quick and easy installation on your multi-rotor frame. These motors are supplied inside a nice foam lined Multistar metal box.

These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.


Spec:
KV(RPM/V): 610
Lipo cells: 4s
Max Surge Watts(W): 330
Working current: 16 amps
Max.current(10s): 22 amps
No Load Current: 0.3 amps
Intemal Resistance: 0.091 ohm
Number of Poles: 16
Dimensions(Dia.xL): 42 x 24.5 mm
Shaft: 3 mm
Prop: 12 x 3 - 12 x 6
Weight: 86g

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 1700kv
Poles: 4
Max voltage: 22.2v (6S)
Max Current: 84A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Weight: 270g

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you will not find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 1460kv
Poles: 4
Max voltage: 25.9v (7S)
Max Current: 72A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Weight: 270g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 4074
Number of pole: 4
Motor KV: 2000
Max Current: 120A
Max Voltage: 25V / 6S Lipoly
Case Length: 74mm
Case Dia: 40mm
Shaft Dia: 5.0mm
Total Length: 91mm
Weight: 380g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Weight: 275g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-2200KV
Poles: 4
KV: 2200
Max Current: 70A
Max Voltage: 25.2V/6S Lipo
Max Watts: 1750w
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1900KV
Poles: 4
KV: 1900
Max Current: 61A
Max Voltage: 29.4V/7S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1650KV
Poles: 4
KV: 1650
Max Current: 70A
Max Voltage: 33.6V/9S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK2845-3650KV
Poles: 4
KV: 3650
Max Current: 48A
Max Voltage: 16.8V/4S Lipo
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Specs:
Size: XK2845-1980KV
Poles: 4
KV: 1980
Max Power: 220W
Max Current: 24A
Max Voltage: 33V (2-4S LiPo)
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Spec.:
Size: XK2858-2900KV
Poles: 4
KV: 2900
Max Power: 1300W
Max Current: 58A
Max Voltage: 23V (6S LiPo)
Case Length: 58mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 70mm
Weight: 160g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Durafly Tundra replacement 3636-900KV motor w/mount and propeller shaft that is suitable for the V1, V2, V3, and the Night versions of the Tundra.

Turnigy AX-2203C 1400KV/60W Brushless Outrunner Motor

A high-quality compact and lightweight brushless outrunner motor for indoor and park fly type models. This motor is supplied with an integrated prop driver (O ring not supplied), suitable for planes weighing up to 275g.
(No connectors supplied)

Performance Data (2S):
8x4: 31W, 4.4A, 218g static thrust
8x6: 37W, 5.2A, 260g static thrust
9x6: 43W, 6.1A, 273g static thrust

A high quality compact and lightweight brushless outrunner motor for indoor and parkfly type models. This motor is supplied with an intergrated prop driver (O ring not supplied), suitable for planes weighing up to 350g.

(No connectors supplied)

Performance Data (2S):
7x4: 31W, 4.3A, 234g static thrust
8x4: 41W, 5.8A, 279g static thrust
9x5: 56W, 8A, 343g static thrust

Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.

The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.

Specs.
Motor Type: 4 Pole Inrunner
Winding: 2.5D
Voltage: 5~6S Lipoly
RPM/V: 1900kv
Internal resistance: 0.011 Ohm
Max Loading: 80A
Max Power: 1770W
Shaft Dia: 5.0mm
Weight: 249g
Motor Plug: 3.5mm Bullet Connector
For 90mm EDF Units

Introducing our Dr. Mad Thrust high performance EDF series. The Dr. has been hard at work to bring you MAD power EDF systems with excellent quality and high performance at a price that will leave some cash in your pocket.

The Dr. Mad Thrust EDF series are pre-assembled and dynamically balanced making them easy to fit, with no unit assembly required. As well as high power, these fans have excellent cooling and run so smoothly, the sound is amazing. There is also no housing distortion unlike plastic fans. This high quality, powerful fan is a great way to turn your 40mm EDF jet into a speeding missile!

This 40mm, 8-blade combo with the inrunner motor was developed by Dr. Bret Becker, for his record breaking Electrolyte Micro EDF sport jet, and is capable of pushing the model past the 100mph barrier. That ARF model will be available soon from HobbyKing, but you can get his prescription for power early for all your micro EDF projects!

Dr. Mad Thrust EDF series - just the right prescription for your model!

Features:
• Pre-assembled
• Factory dynamically balanced
• High power with superior cooling
• High quality construction
• Fully serviceable
• Fast to fit
• No housing distortion

Specs:
Rotor size: 40mm, 8 Blades
Weight: 63g
MAX RPM: 96000
MAX Power (10sec.): 330 Watts
Continuous Power: 290 Watts
Motor size: B2225
Kv: 8000
Voltage: 11.1V
Current: 26A
Thrust Power Upto: 400g
Inner Dia: 41mm
Outer Dia: 43mm
Motor Connectors: 2mm Bullet

The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.

The TrackStar brushless motors make a great upgrade for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors.

Features:               
• Sensor-Based for Excellent Torque and Low-Speed Driveability
• Adjustable Timing
• Compatible with any Sensored/Sensorless ESC
• CNC Machined Aluminum Motor Can  
• High Purity Copper Windings
• Powerful Sintered Neodymium Magnets
• High Power Solder Tabs
• Removable/Replaceable Rotor          
• Precision Engineered for Maximum Energy Conversion

*Note: Sensor cable included

Specs:
Can Size: 540
Turns: 21.5
RPM/v: 1855kv
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 22A
Max Watts: 150w
Can Diameter: 36mm
Can Length: 53mm
Shaft Size: 3.175mm
Weight: 177g

Now officialy approved by ROARfor stock class race use!

The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.

The TrackStar brushless motors make a great upgrade for 1/10th short course trucks, buggies, touring cars or anything else that uses 540 size motors.

Features:               
• Sensor-Based for Excellent Torque and Low-Speed Driveability
• Adjustable Timing
• Compatible with any Sensored/Sensorless ESC
• CNC Machined Aluminum Motor Can  
• High Purity Copper Windings
• Powerful Sintered Neodymium Magnets
• High Power Solder Tabs
• Removable/Replaceable Rotor          
• Precision Engineered for Maximum Energy Conversion

*Note: Sensor cable included

Specs:
Can Size: 540
Turns: 13.5
RPM/v: 3040kv
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 36A
Max Watts: 255w
Can Diameter: 36mm
Can Length: 53mm
Shaft Size: 3.175mm
Weight: 178g

Now officialy approved by ROAR for modified 13.5 spec class race use!

The Turnigy TrackStar Sensored Brushless Motors offer outstanding performance at an incredible price!

Featuring a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.