Power Systems

These new prop hubs are ideal for achieving that finished look to your model and the new raised motor mount will assist in providing some additional clearance for the back of the shaft against the model's firewall.

This package will fit the SK3 Series of motors in the following sizes only: 2822, 2826, 2830, 2836.

Includes:
1 x Prop hub
1 x motor mount
4 x mounting screws

These new prop hubs are ideal for achieving that finished look to your model and the new raised motor mount will assist in providing some additional clearance for the back of the shaft against the model's firewall.

This package will fit the SK3 Series of motors in the following sizes only: 3530

Includes:
1 x Prop hub
1 x motor mount
4 x mounting screws

Trackstar motors are constantly improving and the latest 380's are no exception.  These sensorless brushless motors have precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.  

These motors are perfect for 1/18 or 1/16 size vehicles with plenty of power to spare.

With Trackstar motors you can be assured that quality and performance has not been compromised and that these motors represent outstanding value.

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor KV: 3800
Max Current: 24A
Max Power: 185W
Recommended ESC: 45A
Max Voltage: 11.1V / 3S Lipoly
Case Length: 37mm
Case Dia: 28mm
Bolt Hole Spacing: 16mm and 19mm
Shaft Dia: 3.17mm
Total Length: 51.5mm
Weight: 86g

Trackstar motors are constantly improving and the latest 380's are no exception.  These sensorless brushless motors have precision bearings, correctly rated magnets, balanced rotors, and premium grade steel shafts.  

These motors are perfect for 1/18 or 1/16 size vehicles with plenty of power to spare.

With Trackstar motors you can be assured that quality and performance has not been compromised and that these motors represent outstanding value.

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor KV: 3200
Max Current: 20A
Max Power: 154W
Recommended ESC: 45A
Max Voltage: 11.1V / 3S Lipoly
Case Length: 37mm
Case Dia: 28mm
Bolt Hole Spacing: 16mm and 19mm
Shaft Dia: 3.17mm
Total Length: 51.5mm
Weight: 86g

TrackStar digital servos are the ultimate in precision and holding power. Trackstar has recognized the importance of quality reliable servos and brings the racer / basher, a line of digital servos for 1/8th and 1/10th scale vehicle applications. These robust servos feature alloy cases, dual ball bearing output shafts, and a metal gear train.

Digital brushless servos, the ultimate in precision and holding power. Trackstar by Turnigy knows this importance by bringing a line of digital brushless servos for 1/8th and 1/10th scale vehicle applications. These robust servos feature alloy cases, dual ball bearing output shafts, and a metal gear train.

If you're looking for the ultimate steering servo for your 1/10th scale short course, we have just the thing!

The TrackStar TS-411MG is a standard size digital servo featuring a metal geartrain, coreless motor and a fast 0.09sec transit time. Add to that it's excellent performance and tricked out looks, and you have one outstanding steering servo for the price!

Perfect for your Associated SC-10, Traxxas Slash, or HPI Blitz

Specs:
Weight: 57g
Size: 39.0mmx19.5mmx38.5mm
Torque: 9.2kg.cm (4.8V)~11.1kg.cm (6.0V)
Speed: 0.11sec/60deg (4.8V)~0.09sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Digital Standard
Motor: Coreless Motor
Gear Train: Alloy Gears
Ball Bearing: Dual Japan NSK Ball Bearing
Lead Length: 255mm
Plug: JR/Futaba
Spline Count: 25

If you're looking for the ultimate steering servo for your 1/8th scale truggy, we have just the thing!

The TrackStar TS-621MG is a standard size digital servo featuring a metal geartrain, coreless motor and a fast 0.14sec transit time. Add to that it's excellent performance and tricked out looks, and you have one outstanding steering servo for the price!

Specs:
Weight: 57g
Size: 39.0mmx19.5mmx38.5mm
Torque: 16.8kg.cm (4.8V)~21.2kg.cm (6.0V)
Speed: 0.16sec/60deg (4.8V)~0.14sec/60deg (6.0V)
Voltage: 4.8~6.0V
Type: Digital Standard
Motor: Coreless Motor
Gear Train: Alloy Gears
Ball Bearing: Dual Japan NSK Ball Bearing
Lead Length: 255mm
Plug: JR/Futaba
Spline Count: 25

HK-15178B Digital MG Servo 1.5kg / 0.08sec / 13.5g

Spec.
Torque: 1.3kg/cm @ 4.8v, 1.5kg @ 6.0v
Weight: 13.5g
Speed: 0.10 / 60deg @ 4.8v, 0.08 / 60deg @ 6.0v
Voltage: 4.8v~6.0v
Gear Type: Metal
Plug: JR Style

HK15338 Giant MG Digital Servo
 
Spec.
Torque: 19.80kg @ 4.8v, 25kg @ 6v
Weight: 175g
Speed: 0.23 / 60deg @ 4.8v, 0.20 / 60 deg @ 6v
Voltage: 4.8v~6v
Plug: JR style
 
Features:
Metal Gears
Dual Ball-race
Water Resistant O-Rings
Ideal For 1/5 Scale Car

This digital ultra-micro servo is perfect for your indoor flyer or any other micro rc application.

Specs:
Voltage: 2.5~4.8V
Speed: 0.07sec/60°(3.7V),0.05sec/60°(4.2V)
Torque: 0.065kg·cm(3.7V),0.075kg·cm(4.2V)
Dimensions: 13.5 x 6.2 x 16mm
Weight: 1.7g
Motor: Coreless
Gear Train: Plastic
Type: Digital

This digital ultra-micro servo is perfect for your indoor flyer or any other micro rc application.

Specs:
Voltage: 2.5~4.8V
Speed: 0.07sec/60°(3.7V),0.06sec/60°(4.2V)
Torque: 0.095kg·cm(3.7V),0.11kg·cm(4.2V)
Dimensions: 16 x 8.2 x 16.5mm
Weight: 2.2g
Motor: Coreless
Gear Train: Plastic
Type: Digital

Specs:
Constant Current: 40A
Burst Current: 60A
Battery: 2-6S Lipoly / 5-18s NiXX
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Size: 45 x 30 x 17mm
Weight: 36g

Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Low / Medium / High
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)

Specs:
Constant Current: 50A
Burst Current: 80A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Size: 70 x 32 x 17mm
Weight: 71g

Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Low / Medium / High
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)

Specs:
Constant Current: 30A
Burst Current: 40A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 2A
Motor Type: Sensorless Brushless
Cooling: Watercooled
Size: 70 x 27 x 17mm
Weight: 53g

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

HobbyKing Boat ESC Programming Card

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

Specs:
Constant Current: 90A
Burst Current: 120A
Battery: 2-6S Lipoly
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Cooling: Watercooled
Size: 87 x 38 x 22mm
Weight: 105g

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

HobbyKing ESC Programming Card

Suits The following HobbyKing ESCs

Hobby King 120A ESC 4A UBEC
Hobby King 80A ESC 4A SBEC
Hobby King 60A ESC 4A UBEC
Hobby King 40A ESC 4A UBEC
Hobby King 30A ESC 3A UBEC
Hobby King 20A ESC 3A UBEC

See related items below.

This 45A brushed ESC is a great replacement for your model's stock ESC or for setting up a new brushed power system in your car or truck. It features a low voltage cut-off for use with lipoly batteries. Its compact and lightweight design make it ideal for use in 1/10 scale drift cars utilizing brushed motors.

Features:
• Low voltage cutoff for use with Lipoly batteries
• Compact and lightweight design
• 5.6V/2A BEC

Specs:
Continuous Current: 45A
Burst Current: 320A (10sec)
Suitable Car: 1/10 on and off road
Battery: 2 cell Lipo (5-6 cells NI-xx)
BEC output: 5.6V/2A switch mode built-in
Motor type: brushed
Operation: Forward/Brake/Reverse
Dimension: 38x28x22mm
Weight: 40g

The HobbyKing Red Brick ESCs wont win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESCs have been engineered with heat dissipation in mind. featuring over sized Aluminium heat sinks the Red Brick ESCs are slightly larger than many ESCs in their class, however this compromise in size is aimed at assisting to eliminate the problems associated with over heating.

Features:
• Smooth, linear throttle response
• Uses powerful, high performance MCU
• Multiple self protection functions: abnormal voltage input, low battery protection, over thermal protection, throttle signal loss
• Programmable via throttle stick (see instructions under "Files" tab)

Specs:
Constant Current: 70A
Max Burst Current: 90A
Input Voltage: 2~7S (7.4~25.9), 6~20 NiCd/NiMH
BEC: 5V/5 A
Dimensions: 60x35x18mm
Weight: 70g
Servo Lead: JR Type

The HobbyKing Red Brick ESCs won't win first place for style, though they will take top points for simplicity and reliability. With a basic set of programming features, these ESCs are a perfect solution for anyone looking for a basic yet robust speed controller.

The Red Brick ESC has been engineered with heat dissipation in mind. featuring an oversized Aluminium heat sink for the FETS and an individual heatsink for the MCU the Red Brick ESC is slightly larger than many ESCs in its class, however, this compromise in size is aimed at assisting to eliminate the problems associated with overheating.

Specs:
Constant Current: 50A
Burst Current: 70A
Battery: 2-6S Lipoly
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Cooling: Watercooled
Size: 87 x 38 x 22mm
Weight: 105g

Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic

The Turnigy TGY series offers excellent performance and quality at a great price. The TGY-4409MD digital servo offers precise centering and an ultra-durable metal gear drivetrain.

Servo Tape (Clear) 25mm x 1m

This awesome servo tape is super strong and when the backing is removed it is completely clear. This tape has the amazing property of being very sticky and will securely fasten your servos, receivers, speed controls and transponders to your aeroplane, helicopter car or boat, yet when you wish to remove them, they come right off without the servo tape breaking apart plus there is no residue left on the surface!!

Very clean, very secure and incredibly versatile.

Size
Width: 25mm
Depth: 1mm
Length: 1m

35mm Diameter Motor Mount - Clamp Style for Inrunner Motor

Spec.
Diameter:35mm (Fits 540 Size Inrunner)
Length: 41mm
Weight: 16g

Quanum MT series motors are Spec built by DYS, well known in the industry for their quality and performance.

The MT line uses quality NMB bearings, high pole counts for torque and smooth operation and all have standardized universal mountings in their given size. Quanum has spec’d the motors with N42sh magnets and .2mm laminations for optimal efficiency. The MT’s also have ample motor wire length for a cut to fit installation, with included bullet connectors and shrink tube. Another great feature is that Quanum spec’d all the motors to come with mounting hardware in various lengths, as well as both hub and direct mount propeller options, so installation is a snap.

Each Quanum motor is QC checked for balance, wind, performance and mechanical tolerance. The DYS brand is well known for their BE series and the new spec built MT line will set new standards of value vs performance.

Features:
• High Power N42sh magnets
• Precision NMB bearings
• .2mm laminations for optimal efficiency
• Ample cut to length motor wires for a clean install
• Direct mount propeller or Hub style compatible
• Multi-length mounting hardware included

Specs:
KV(RPM/V): 2000KV
Lipo cells: 2-3S
Max Power: 84.4W
Max Amps: 7.6A
No Load Current: 0.6/11.1V
Internal Resistance: 0.98ohm
Number of Poles: 14
Dimensions(Dia.xL):28 x 17mm
Motor Shaft: 2mm
prop shaft: 5mm CW prop adapter
Weight: 33g
bolt hole spacing: 16*19 M3
Lamination thickness:  0.2mm
Magnets: 42SH
Wire: 18AWG
Connector: 3.5mm bullet

PROP         Power/PWM     Voltage (V) Current (A)   Thrust (gf)   RPM
6x4.5 STD        10                 11.1          0.44          27.15        3451
6x4.5 STD        25                 11.1          2.62         163.01       8336
6x4.5 STD        50                 11.1          6.66           349.5      12040
6x4.5 STD        75                 11.1        13.53           571.3      15409
6x4.5 STD      100                  11.1       15.74          633.98      15935
6x4.5 STD        10                 14.8          0.59           44.33       4449
6x4.5 STD        25                 14.8            3.7         260.26      10489
6x4.5 STD        50                 14.8          9.75         549.91      14962
6x4.5 STD        75                 14.8         20.28         874.48      18361
6x4.5 STD      100                 14.8         22.45         914.19      18943

31mm Alloy Prop Nut/Spinner Suits 10mm Thread (Anodised Silver)

Height:30mm
Width:31mm
Thread Size:10mm
Thread Depth:25mm

31mm Alloy Prop Nut/Spinner Suits 10mm Thread (Anodised Silver)

Height:30mm
Width:31mm
Thread Size:10mm
Thread Depth:25mm

31mm Alloy Prop Nut/Spinner Suites 8mm Thread (Anodised Black)

Height:30mm
Width:31mm
Thread Size:10mm
Thread Depth:25mm

Prop Nut/Spinner 22mm Alloy 10x1.0