Power Systems

Corona DS238HV Digital Metal Gear Servo 4.6kg / 0.13sec / 22g

Corona DS538HV Digital Metal Gear Servo 8kg / 0.12sec / 58g

Corona DS558HV Digital Metal Gear Servo 14kg / 0.18 Sec / 58g

Corona DS339HV Digital Metal Gear Servo 5.1kg / 0.13sec / 32g

Corona DS329HV Digital Metal Gear Servo 4.5kg / 0.09sec / 32g

Corona DS-239MG Digital Slim Wing Servo (Metal Gear) 4.6kg / 0.15sec / 22g

Corona CS-239MG Slim-Wing Analog Servo 4.6kg / 0.14sec / 22g

Corona DS-319HV Digital Metal Gear HV Servo 4.2kg / 0.05sec / 34g
Digital with MOSFET drive

Model: DS-319HV
Operating Voltage: 7.4V
Operating Speed: 0.05sec.60º
Stall Torque: 4.2kg.cm
Size: 32.5 x 17 x 34.5mm
Weight: 34g (inc wire and plug)
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 5 slider/indirect Drive
Ball bearing: MR106
Gear: Metal
Connector wire: 300mm
Operating Temperature Range: -20°c + 60°c

Corona CS-239HV Analog Slim Wing Servo (Metal Gear) 4.6kg / .13sec / 22g

Corona DS-239HV Digital Slim Wing Servo (Metal Gear) 4.6kg / .13sec / 22g

Corona DS-918MP Digital Servo 1.8kg / 0.06sec / 9g

Corona CS-918MP Analog Servo 1.5kg / 0.07sec / 9g

Corona digital servo's are a must for the modeller who wants a reliable, high specification servo.

Corona digital servo's are a must for the modeller who wants a reliable, high specification servo.

Features:
• Higher resolution
• The tightest dead band
• Accurate positioning
• Faster control response
• Quicker acceleration
• Constant torque throughout the servos travel
• Increased holding power when stationary

Corona digital servos are a must for the discerning pilot. They have higher resolution, accurate positioning, faster control response, constant torque throughout the servos travel, increased holding power, and a really tight deadband.

The Corona DS-843MG metal geared servo is not only fast (0.10sec/60°) but it has an incredible amount of torque (4.8kg) which for a servo weighing only 8.5g is quite something.

Features:
• High resolution
• Accurate positioning
• Fast control response
• Constant torque throughout servo travel
• Excellent holding power
• Tight deadband
• Quick acceleration
• High torque

B36-60-06L Brushless Inrunner 4000kv.

Looking to make your video platform ultra-smooth? This is the ultimate in smooth high pole count purpose built brushless gimbal motors.

The 2804 motor comes with flush mounting so any DIY to PRO projects are simple and straight forward, it also comes with the standard female connector pre-installed, So wiring is as simple as plugging it in. It’s a perfect match to our Brushless Gimbal Stabilization Board and IMU.

The 2804 is the perfect size for cameras around 100-300 grams (GoPro style).

Spec:
Poles: 12N14P
KV(RPM/V): 210
Resistance: 10.4omh
Weight: 35g
Wire: 0.19mm
Torque: 240g
Bottom holes center to center: 16mm and 19mm
Top holes center to center: 12mm

The HD-1810MG digital servo from Power HD is a high performance mini servo with an aluminum case for improved rigidity and cooling under load.

The servo features metal gears for optimum strength and smoothness of operation with a ball bearing providing outstanding support for the output shaft.

Full accessory pack is included with the servo.

Specs:
Weight: 15.8g
Dimensions: 23 x 12 x 29mm
Torque @ 4.8V: 3.1 kg/cm
Torque @ 6.0V: 3.9 kg/cm 
Speed @ 4.8V: 0.16 sec / 60° at no load
Speed @ 6.0V: 0.13 sec / 60° at no load
Gear: Metal gear/Ball bearing
Motor: Coreless 
Spline Count: 21 

Included:
One Power HD 1810MG Metal Gear Coreless Digital Servo
One acessory pack

Corona DS-319MG Digital Metal Gear Servo 4kg / 0.06sec / 34g
Digital with MOSFET drive

Compatible with Futuba Fasst transmitters the Corona R14FA offers an affordable alternative for Futaba radio users.

Specs:
Operating Current:
70mA @ FASST 7ch mode normal and 110 mA max,
80mA @ FASST multi-channel mode normal and 110 mA max
Operating Voltage:  4.0 ~10V
Latency:
7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,
8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode
Sensitivity: ~ -96dBm
Fail Safe: Yes
Size: 53x37x16mm
Weight: 22g
Antenna length: 136mm

Compatibility:
FUTABA FASST 2.4GHz transmitters
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Mount this handy device somewhere on your model where it can be seen clearly and plug it into a spare channel on your receiver, if no channel is available then use a Y lead. This unit will give you a visual check of your LiPoly or LiFe receiver battery each time you switch on. The easy to read series of LED's will show you whether it is safe to carry on or if the battery requires charging.

Specs:
Voltage Range: 6.6~7.4V
Dimensions: 40x21x2.5mm
Weight: 4g
Lead Length: 320mm
Plug: JR type

Turnigy EasyMatch Park250 Series - Replacement Shaft

Spec.
Shaft length: 34mm
Shaft diameter: 2mm

Turnigy EasyMatch G110 Series - Replacement Shaft

Spec.
Shaft length: 78mm
Shaft diameter: 13mm

High quality servo wire for making your own custom length servo leads.

Specs:
Wire Diameter: 22AWG each wire
Length: 2mtr
Color: Red/Black/Yellow

Twisted servo wire helps reduce the risk of interference on extra long leads and also as this is 22AWG wire it helps to reduce voltage drop.

Specs:
Diameter: 22AWG (each wire)
Length: 5mtr
Color: Red/Black/White

Designed as a 50 to 80cc gas engine replacement, this motor is a direct bolt in for 17~30lb Sport, Scale and 3D planes .
A perfect size motor for 3D flight up to 20lbs.
The motor is very well built with strong mounts, end bell and a concentric double bearings at the rear to support large propellers and rotating can, especially during hard 3D flight.

This motor is very well engineered and of the highest quality.
The factory can produce only a limited number of these motors per month due to the increased time in balancing and machining such a large object.


Spec.
Model: 80-80-10
Resistance: 0.011ohm
ESC Required: 200A
Input Voltage : 30~50V
Kv : 160 rpm/V
Weight: 1545g
Shaft: 8mm
Non Load Current: 6.0A at 20V
Dimensions: 152x133x81mm (Including Mount)
Equivalent: 50-80cc Gas Engine

The perfect transport/storage option for your precious R/C transmitter!

The Turnigy Transmitter Bag features lightweight construction, yet is rigid enough to protect your radio during normal transport. It has dual zippers, a removable carrying strap and pockets inside to accommdate a wide variety of accessories such as spare TX battery, charger, neck strap and more!

Two self adhesive foam blocks are included on the inside for accommdating your specific transmitter shape. They feature a hook & loop backing so they can be moved to whichever position you need very quickly and easily. There is even a hook & loop strap integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g

We are proud to offer you our YEP ESC series. Although being an exceptional helicopter ESC the YEP range is unbelievably popular with fixed wing aircraft. Featuring programming options such as super smooth soft start, fixed RPM mode (governor mode) and ultra high resolution, you'll be hard pressed to find a better ESC on the market today! 

We have tested these units on our own helicopters and found them to be among the best we have ever seen. The super smooth soft start, along with its ultra high resolution throttle response puts this ESC in a class of its own!

YEP ESCs are built to last and can be programmed via optional programing card or by transmitter stick inputs.

YEP ESC series offers a super smooth linear throttle responce making them exceptional fixed wing and helicopter ESCs.  The features offered in this ESC are only matched by the most expensive european brands at a fraction of the cost. The super smooth soft start, along with its ultra high resolution throttle response puts this ESC in a class of its own!

HobbyKing® ™ X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.
 
Features:
• Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes
• Programmable with the Hobbyking X-Car programming card to make adjustments. (sold separately)
• Automatically detects the number of cells within the battery pack.
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
• Supports both sensored and sensorless brushless motors.
• Compatible with NOVAK, LRP and ORION sensored brushless motor.
• Built-in cooling fan
• Programmable via USB (USB adapter sold separately)

Specs:
Continuous Current: 60A
Burst Current: 240A
Suitable Car: 1/10 on and off road
Battery: 2-3 cells Lipo (5-9 cells NI-xx)
BEC output: 5.7V/3A switch mode built-in
Motor type: Sensorless and sensored brushless motors
Running mode: Forward only or forward with reverse (user programmable mode)
Dimension: 43 x 36 x 33mm
Weight: 84g
 
Includes:
60A Sensored/Sensorless Brushless ESC
Sensor cable (6-pin)

*Note: See related items below for compatible programming card and USB adapter.

We are now proud to offer our HobbyKing YEP ESC series. With helicopter specific programming options such as super smooth soft start, fixed RPM mode (governor mode) and ultra high resolution, you won't find a better helicopter ESC on the market today!
 
We have tested these units on our own helicopters and found them to be among the best we have ever seen. The super smooth soft start, along with its ultra high resolution throttle response puts this ESC in a class of its own!

The YEP series ESCs not only offer excellent performance for helicopters, they are also well suited for fixed-wing use with a whole host of programmable features.
 
HobbyKing YEP ESCs are built with the highest quality components to ensure true-to-rating current handling and high efficiency operation.
 
All HobbyKing YEP ESCs can be programmed via optional programing card or by transmitter stick inputs.

Features:
• Powerful 5.5V/4A Switching BEC
• Optional programming card for convenient setup
• Super fine throttle resolution provides first-rate and highly accurate linearity
• Super smooth adjustable start-up mode
• Constant RPM mode (governor mode)
• Adjustable F3A brake. 
• 3 steps adjustable normal EMF brake 
• High anti-interference capability
• Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4 
• Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC)
• Low voltage cut-off can be disabled 
• Variable cut-off voltage / cell   
• Active free-wheeling circuit allows for unlimited "partial load" capability
• LED status display 
• Adjustable motor timing from 0° to 30° 
• Blocked rotation protection (senses a jammed motor and stops motor rotation) 
• Motor reversing from ESC (no need to change ESC/motor wires)
• Over-temperature protection and overload alarm 
• Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off. 
• Safe power-on. (Motor will not start until throttle is returned to lowest position)


***This ESC is compatible with both helicopter and airplane models.***


Specification:
Max Cont Current: 18A
Max Burst Current: 20A for 10 seconds
Input Voltage: 2-4 cells li-XX or 6-12 Ni-MH/Ni-Cd battery
BEC: 5.5V/4A Switching BEC
PWM: 8~16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 34x24x9mm
Weight: 22g (including wires)

YEP ESC series offers a super smooth linear throttle responce making them exceptional fixed wing and helicopter ESCs.  The features offered in this ESC are only matched by the most expensive european brands at a fraction of the cost. The super smooth soft start, along with its ultra high resolution throttle response puts this ESC in a class of its own!

HobbyKing X-Car series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!

Built with high quality components, and offering both sensored and senorless motor operation, this is a truly versatile high performance ESC that wont break the bank.
 
Features:
• Enhanced throttle response, precise throttle linearity, excellent acceleration and strong brakes
• Programmable with the Hobbyking X-Car programming card to make adjustments. (sold separately)
• Automatically detects the number of cells within the battery pack.
• Multiple protection features: Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor blocked protection.
• Supports both sensored and sensorless brushless motors.
• Compatible with NOVAK, LRP and ORION sensored brushless motor.
• Built-in cooling fan
• Programmable via USB (USB adapter sold separately)

Specs:
Continuous Current: 80A
Burst Current: 450A
Suitable Car: 1/10 on and off road
Battery: 2-3 cells Lipo (5-10 cells NI-xx)
BEC output: 5.7V/3A switch mode built-in
Motor type: Sensorless and sensored brushless motors
Running mode: Forward only or forward with reverse (user programmable mode)
Dimension: 44 x 34 x 31.5mm
Weight: 85g
 
Includes:
80A Sensored/Sensorless Brushless ESC
Sensor cable (6-pin)

*Note: See related items below for compatible USB adapter.