Power Systems

Combined with a 10x6 E-prop this motor can push out over 1000g in thrust on a 3S1P configuration lipo.
Good for bigger foamies or parkflyers where about 150W is required.

Spec.
Kv: 1050rpm/v
Operating Current: 6A ~ 16A
Peak Current: 19A
Weight: 56g
Dimensions: 27.6 x 32mm
Shaft Size: 3.175mm

Kit includes full accessories, including gold bullet connectors, prop saver, mount, spare rubber rings, shrink tube and screws.

Performance Data   
Voltage   Current   Prop    Thrust
11.1V      8.6A      8040    538g
11.1V      13.7A    9050    810g
11.1V      16.7A    1060    650g

Turnigy Air Brushless Motor 3730-1000kv
 
Specifications:
Dimension: 37mm x 30mm
Weight: 112g Inc 4mm Gold Connector (130g inc all fittings)
Kv: 1000rpm/V
Voltage: 11.1v~14.8v (3s~4s)
Max Power: 580w
Max Current: 42A
No load Current: 1.6A
Diameter of shaft: 4mm
Thrust: 1700g
ESC: 60A

Specs.
RPM/V: 1350Kv
Cell Count: 2s~3s Lipoly  
Max.current: 10A
Max Watts: 120w 
No Load Current: 0.3A/7.4V 
Dimensions: Φ28mm×16mm
Shaft: 3mm
Weight: 26g
Max Thrust: 245g

LDPOWER MT2206-1900KV Brushless Multicopter Motor (CW)

Innovators in multicopter technology, LDPOWER, have released their long awaited series of premium multicopter motors. These have been stringently tested to ensure outstanding performance, reliability and durability.

These motors are easy to install, very efficient and have no noise. They come in both CW and CCW formats.

LDPOWER motors are premium quality and will definitely answer the need of serious builders and flyers of quads/multis everywhere.

Specs:
KV(RPM/V): 1900KV
LiPoly cells: 7.4V-11.1V (2S-3S)
Max Power: 323.8W
Max Amps: 25.7A
Dimensions(Dia.xL): 29.5 x 27.7mm
Motor Shaft: 3mm
Prop shaft: 5mm
Weight: 34.7g
Bolt hole spacing: 19mm-M3*2  16mm-M3*2
Connectors: 2mm bullet

Volts  Prop   Throttle  Amps  Watts     RPM     Thrust (g)
7.4    6030   30%     1.8      13.32      8792      85
7.4    6030   50%     2.7      19.98    10341     123
7.4    6030   75%     3.9      28.86    11949     171
7.4    6030   100%    5.3      39.22    13656     228
7.4    6045   30%     2.5      18.5        7107     115.5
7.4    6045   50%     3.7      27.38     8607      164.5
7.4    6045   75%     6.0      44.4     10216      240
7.4    6045   100%    9.2     68.08    12003      335
11.1   6030   30%     3.1     34.41    12140      180
11.1   6030   50%     4.6     51.06    15621      249
11.1   6030   75%     6.9     76.59    16420      350
11.1   6030   100%    10.3   114.33   18953      480
11.1   6045   30%     3.8      42.18     9592      210
11.1   6045   50%     5.8      64.38   11258      292.5
11.1   6045   75%     10.1    112.11  13817      430.5
11.1   6045   100%    16.2    179.82  16315      594.5

Turnigy L2210-1650 Bell Style Motor.

Performance Data (2S):
8x3.8: 96W, 14A, 560g static thrust
8x4.7: 113W, 16A, 659g static thrust
9x4.7: 152W, 22A, 820g static thrust

Performance Data (3S):
6x4: 128W, 12A, 619g static thrust
7x4: 199W, 19A, 882g static thrust
7x5: 230W, 22A, 1047g static thrust

Turnigy L5055B-600 Brushless Outrunner 600kv.

Specs:
Dimension: 50mm x 55mm
Weight: 296g (with 4m connectors)
Kv: 600rpm/V
Voltage: 11.1v~29.6v (3s~8s)
Max Power: 1500w
Max Current: 55A
Max Efficiency: 85% @ 35A
No load Current: 2.6A
Internal Resistance: 0.22
Diameter of shaft: 6mm

Performance Data (4S):
13x10: 595W, 43A, 3150g static thrust
14x8.5: 652W, 47A, 3265g static thrust
15x8: 755W, 55A, 3556g static thrust

Performance Data (6S):
11x8: 885W, 43A, 3668g static thrust
12x7: 1030W, 50A, 4084g static thrust
12x8: 1133W, 55A, 4410g static thrust

Performance Data (8S):
10x6: 1135W, 40A, 3751g static thrust
11x5.5: 1420W, 51A, 4384g static thrust
11x6: 1495W, 54A, 4695g static thrust

Upgrade your 100cc size gas engine model with the Turnigy RotoMax 100cc Brushless outrunner motor. This motor will provide clean and efficient power for your large-scale aircraft without the mess and hassle of fuel.

When combined with a 12s Lipoly battery, 27x12 Propeller, and a 250Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.

Performance Data (12S):
26x10: 5750W, 140A, 17622g static thrust
26x12: 6458W, 159A, 20139g static thrust
27x10: 6333W, 156A, 18960g static thrust
27x12: 7077W, 175A, 21565g static thrust

Upgrade your 50cc size gas engine model with the Turnigy RotoMax 50cc Brushless outrunner motor. This motor will provide clean and efficient power for your large-scale aircraft without the mess and hassle of nitro fuel.

When combined with a 10S LiPo battery, a 24x10 to 26x12" propeller, and a 150Amp ESC the RotoMax motor will supply punchy, responsive power that only an electric setup can provide.

Performance Data (10S):
24x10: 2893W, 83A, 11227g static thrust
24x12: 3300W, 95A, 12974g static thrust
26x10: 3632W, 106A, 13315g static thrust
26x12: 4101W, 120A, 15246g static thrust

Performance Data (12S):
22x8: 3031W, 72A, 10488g static thrust
22x10: 3560W, 86A, 12627g static thrust
24x8: 3933W, 95A, 12805g static thrust
26x8: 4915W, 120A, 15150g static thrust

B36-60-06L Brushless Inrunner 4000kv.

Turnigy EasyMatch Park250 Series - Replacement Shaft

Spec.
Shaft length: 34mm
Shaft diameter: 2mm

Turnigy EasyMatch G110 Series - Replacement Shaft

Spec.
Shaft length: 78mm
Shaft diameter: 13mm

Designed as a 50 to 80cc gas engine replacement, this motor is a direct bolt in for 17~30lb Sport, Scale and 3D planes .
A perfect size motor for 3D flight up to 20lbs.
The motor is very well built with strong mounts, end bell and a concentric double bearings at the rear to support large propellers and rotating can, especially during hard 3D flight.

This motor is very well engineered and of the highest quality.
The factory can produce only a limited number of these motors per month due to the increased time in balancing and machining such a large object.


Spec.
Model: 80-80-10
Resistance: 0.011ohm
ESC Required: 200A
Input Voltage : 30~50V
Kv : 160 rpm/V
Weight: 1545g
Shaft: 8mm
Non Load Current: 6.0A at 20V
Dimensions: 152x133x81mm (Including Mount)
Equivalent: 50-80cc Gas Engine

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
11x4.7: 372W, 35A, 1669g static thrust
11x6: 440W, 42A, 2018g static thrust
12x4.7: 472W, 46A, 2000g static thrust

Performance Data (4S):
9x6: 525W, 37A, 2145g static thrust
9x7.5: 616W, 44A, 2566g static thrust
10x5.5: 665W, 48A, 2519g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (10S):
20x8: 1771W, 49A, 7082g static thrust
20x10: 2085W, 59A, 8504g static thrust
22x10: 2707W, 80A, 10395g static thrust

Performance Data (12S):
17x10: 2061, 48A, 7995g static thrust
18x10: 2444W, 58A, 9145g static thrust
19x10: 2850W, 68A, 10319g static thrust

DYS D2225/13 2000KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 2000kv
Max current: 11A
Max power: 122W
Internal resistance: 0.143 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x4/6x5

DYS D2225/19 1350KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1350kv
Max current: 8.2A
Max power: 105W
Internal resistance: 0.203 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x5/7x3

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

We have included a collet-style adapter, as well as a bolt-on prop adapter.

26mm Diameter Motor Mount - Clamp Style for Inrunner Motor

Spec.
Diameter: 26mm (Fits 380 Size Inrunner)
Length: 48.5mm
Weight: 14g