Power Systems
-
Turnigy™ TGY-390DMH High Performance DS/MG Servo 5.4kg / 0.11sec / 22.5g$31.85TGY-390DMH High Performance Digital Servo (Extra Strong) 5.4kg / .11sec / 22.5g
Learn More
Specification:
Weight: 22.5 grams / 0.79 oz.
Dimensions: 29 x 13 x 30 mm / 1.14 x 0.51 x 1.18 inch
Torque @ 4.8V: 4.6 kg/cm , 64 oz/in
Torque @ 6.0V: 5.4 kg/cm , 75 oz/in
Speed @ 4.8V: 0.14sec / 60 deg at no load
Speed @ 6.0V: 0.11sec / 60 deg at no load
Twin ball bearing and full metal gears. High performance servo recommended for Airplane & Helicopter (Tail) -
Turnigy™ TR-1160A Mini Servo 25T 3.0kg / 0.11sec / 16g$6.19Mini analog servo.
Precise, jitter free response for small parkflyers or light 3D.Model: TR-1160A
Voltage: 6v
Speed: 0.11sec
Torque: 2.1kg/cm
Weight: 16g
Size: 29.6x28x13.2mm
Spline Count: 25Attention, servo gears can strip if more than 2.1kg of force is applied. Ensure your control surfaces and control rods/wires do not bind.Learn More -
Turnigy 3 Channel Servo Speed/Direction Regulator$9.42A fully adjustable 3 channel-out Servo Regulator which can be used on any receiver channel and will increase the servo travel time, direction and duration. Great for scale model retracts flaps and canopies where scale detail and flight characteristics are important. No more ((boing!)) cartoon like landing gear action.Weight: 3g
Input: 1 servo Channel.
Output: 3 Channels.
Options: Travel Speed & Travel Time in both directions.Learn More -
Turnigy TGY-225MG Analog High Torque Ballraced Servo 21T 3.5kg / 0.12sec / 26g$10.99Specs:
Model: TGY-225MG
Voltage: 4.5 - 6v
Speed: .12s
Running Current: 180mA
Torque: 3.5kg/cm
Gears: Metal
Weight: 26g
Spline Count : 21 ToothNarrow dead band width.
Learn More -
HX 5010 Twin bearing Digital Servo 25T 6.5kg / 0.16sec / 39.2g$8.60The HX5010 servo won't break any records, it won't astound you with its amazing torque or scare your friends with its ninja-like high-speed action, but it is a solid, reliable plastic gear servo that's economical and great for those that are not too serious about the specification.
HX5010 servos shipped as of Aug 1, 2014, are digital versions, no longer analog. Same great price, and even better performance!
Learn More -
HXT500 Micro Servo 1.2kg / 0.10sec / 5gSpecial Price $3.67 Regular Price $4.43HXT500, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT500 is the #1 trusted low-cost 5g servo.
Features:
• Teflon bushing
• 15cm wire
• Coreless motor
• Servo arms & screw includedSpecs:
Size: 21.3x11.5x22 mm
Voltage: 4.8v ~ 6v
Weight: 6.2g
Speed: 0.10 sec/60(4.8V)
Torque: 1.2kg-cm
Working Temp: -30C~60C
Gears: PlasticWARNING
Learn More
These servos can be found on eBay and other asian seller stores at close to this price, however be warned, they do not contain Taiwan/Japan components. The manufacturers of these servos have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere! -
HXT900 Micro Servo 1.6kg / 0.12sec / 9.8gSpecial Price $4.26 Regular Price $4.69HXT900, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT900 is the #1 trusted low-cost 9.8g servo.
Learn More
Features:
• Teflon bushing
• 25cm wire
• Coreless motor
• Servo arms & screw included
Specs:
Size : 23x12x23 mm / 0.9x0.47x0.9 in
Voltage : 3v ~ 6v
Weight: 9.8g / 0.35oz
Speed: 0.12 sec/60(4.8V)
Torque : 1.6kg-cm
Working Temp: -30C~60C
Gears: Nylon White type
WARNING
Similar-looking servos can be found on eBay and other Asian sellers. However be warned, they do not contain Taiwan/Japan components. The manufacturers of these servos have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere! -
HXT MG-14 Digital Aircraft Servo 23T 2.6kg / 0.11sec / 14g$10.99The MG14 is one of our all time best selling and best value metal gear micro servos. Trusted by hobbyist world wide for its reliability and ruggedness in applications where plastic gear servos just don’t hold up. Now the MG 14 has entered the Digital age offering greater precision and reliability and also includeds a new aluminium case for extra cooling all at the same low price!Learn More -
Turnigy™ MG90S DS/MG Servo 10T 1.8kg / 0.10sec / 18g$7.65The Turnigy MG90S now features digital processing for greater precision. Same great performance, now with digital precision.All Turnigy MG90S servos shipped as of July 1, 2014 now feature a digital processor.Learn More -
Towerpro MG996R Servo 25T 11kg / 0.16sec / 55g$12.49This is essentially an upgraded version of the famous Towerpro MG995 servo. It now has a redesigned PCB and IC control system which makes it far more accurate. Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
Learn More
All specifications are the same as the previous model MG995, however, this servo is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering. -
Blue Bird BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.3g$16.82BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.4gContinuing the Blue Bird tradition of affordable performance. By using carbon+30% POM gears and optimizing the curvature of the gears, the gears are able to withstand over 3.5kg of force. With a tolerance of less than 0.3 degree per PWM step, this servo is perfect for CCPM helicopter control, precision aerobatic aircraft, and 1/18 scale cars.
The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over high temperature without degradation.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. Follow the wiring diagram below. 1. Carbon+30% POM gear with smooth curvature
2. M9.6 ball bearing (si-oil)
3. High-torque motor with low RF noise (CE certified)
4. Rubber seals for waterproof case
5. Designed to be used in R/C helicopter applications.
6. Futaba compatible 25 tooth output splines
7. Metal gears of aluminum 6061 material combined with light and strong C95 material
8. 2PEW coated motor wire for high-temperature us
Learn More
Weight: 11.4 grams / 0.44oz
Dimensions: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch
Torque At 4.8V: 1.6kg/cm , 22 oz/in
Torque At 6.0V: 2.3kg/cm , 28 oz/in
Speed At 4.8V: 0.13sec / 60 deg at no load
Speed At 6.0V: 0.11sec / 60 deg at no load -
Corona DS-929MG Digital Servo 2.2kg / 0.11sec / 12.5g$8.97Corona DS-929MG is a fantastic small powerful servo. Extremely popular with good speed and metal gear. A cost effective digital servo for small RC planes, cars and boats or updating plastic gear servos with metal gear ones. Precise control and minimal dead-band width, they are an excellent choice and recommended by our own electrical engineer, Nick.
Learn More -
Corona DS-919MG Digital Metal Gear Servo 1.7kg / 0.06sec / 12g$9.09Corona 919MG Metal Gear Servo 1.7kg/ 0.06sec / 12.5g
Learn More -
Corona DS-939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5g$9.58Corona 939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5gModel: DS939MGLearn More
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 240mA
Operating Speed: 0.14sec.60º/ 0.13sec.60º
Stall Torque: 2.5kg.cm / 2.7kg.cm
Size: 22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight: 12.5g
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR85
Gear: Metal
Connector wire: 215mm
Operating Temperature Range: -20J+60J -
Power HD 1900A Servo 20T 1.7kg / 0.08sec / 9.9g$4.62Micro analog servo.
Learn More
Precise, jitter free response for small parkflyers or light 3D. -
Electric Retract with Reversible Mount (1pc) 18.8g$9.01The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!
Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mmMount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mmNot suitable for a plane heavier than 2kg
Learn More
Strut & Landing gear not included -
HK-5320 Ultra-Micro Digital Servo 0.075kg / 0.05sec / 1.7g$4.00HK-5320 Ultra-Micro Digital Servo
Spec.
Weight: 1.7g
Speed: 0.07sec 60deg @ 2.8v / 0.05sec 60deg @4.2v
Torque: 0.05kg @ 2.8v / 0.075kg @ 4.2v
Dead Band: <4usPlug: Micro JST - 1.25 PitchLearn More -
HobbyKing™ HK15138 Standard Analog Servo 4.3kg / 0.17sec / 38g$3.96HK15138 Standard Analog Servo
Spec.
Torque: 3.8kg @ 4.8v, 4.3kg @ 6v
Weight: 38gSpeed: 0.21 / 60deg @4.8v, 0.17 / 60deg @ 6v
Voltage:4.8v~6v
Plug: JR StyleLearn More -
HobbyKing™ HK15178 Analog Servo 1.4kg / 0.10sec / 10g$2.59Don't let the price fool you. This is a decent analog servo and the colour is, well, different.
No longer will you goose step to the blue or black servo crowd, get a HobbyKing HK15178!Spec:
Torque: 1.2kg/cm @ 4.8v, 1.4kg/cm @ 6v
Weight: 10g
Speed: 0.10/60deg @ 4.8v, 0.09/60deg @ 6v
Voltage: 4.8v~6v
Plug: JR
Learn More -
HobbyKing™ 939MG Servo MG 2.5kg / 0.14sec / 12.5g$10.99HobbyKing 939MG Metal Gear Servo 2.5kg/ 0.14sec / 12.5g
A strong performer with a very smooth movement and good centering.
Excellent for parkflyers or planes up to .40 size (3,500mAh electric).
Learn More -
Digital Servoless Retractable System (1pc) 37g$8.83The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servo mechanism with metal gearing and a high torque motor ensures trouble free flying!
Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!Landing gear not included with the servoless retractable system.
Features:
Robust landing gear strut and mounting bracketBuilt-in 10 seconds over current and jamming protectionIntegrated electric motor with a micro PCBDouble shock absorption design, completely protect the gearsAuto 90 degree twist when retractedLearn More
Spec.
Working voltage: 4.5~5.5V
Speed: 0.7s/60deg 4.8v - 0.55/60deg 6v
Idle current: 3mA
Angle limit: 90 degree when retracted
Operating temp: -10~50C
Weight: 37g
Shaft size: 3mm
Mounting area size: 35mm x 33mm
Length: 67mm
Not suitable for a plane heavier than 2.5kg -
Digital Servoless Retractable system (1pc) 54g$9.35The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servo mechanism with metal gearing and a high torque motor ensures trouble free flying!
Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!Landing gear not included with the servoless retractable system.Learn More -
Turnigy™ TGY-D56MG Coreless DS/MG HV Servo 1.2kg / 0.10sec / 5.6g$8.14The Turnigy D56MG HV is great for small 3D planes and parkflyers where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price. The HV voltage lets you use a 2s Lipo or LiFE battery directly with no need for a BEC.
Learn More -
Turnigy™ TGY-D56LV Coreless Low Voltage DS/MG Servo 0.89kg / 0.10sec / 5.6g$7.45The Turnigy D56LV is great for small gliders and DLGs, or just about any other mini airplane using single cell LiPoly batteries (3.7V) and where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price.
Learn More -
Turnigy™ TGY-50090M Analog Servo 20T MG 1.6kg / 0.08sec / 9g$7.57Turnigy analog micro servo offering good torque, high speed, excellent centering and a great price!
The strong gear train is all metal geared.
Specs:
Weight: 9g
Size: 23.1mmx12.0mmx25.9mm
Torque: 1.6kg.cm (4.8v)2 kg.cm (6.0v)
Speed: 0.08 sec/60deg (4.8v)0.07 sec/deg (6.0v)
Voltage: 4.8-6.0v
Type: Analog Micro
Gear Train: Metal
Ball Bearing: No
Lead Length: 240mm
Plug: JR/Futaba
Spline Count: 20
Learn More
![]("http:/www.mks-servo.com.tw/images/speed-reaction.jpg"){kind=link}
Login and Registration Form