Power Systems

A semi-rigid carry case that will protect your Turnigy  X14 or X14S transmitter. This is a genuine and well-made FrSky product that includes pre-cut foam inserts to fit your transmitter perfectly.

Specs:
Type: Turnigy  EVA Soft Carry Case
Suits: FrSky X14 & X14S transmitters
Color: Black

Included:
1 x Turnigy EVA Soft Carry Case for X14/X14S Transmitters (Black)

A strong, well-made neck strap that suits a multitude of transmitters including the FrSky X14 series and many, many more. It includes the Turnigy logo, a quick-release connector, and a sliding, clasp to hook onto the transmitter neck strap attachment.

An optional CNC, anodized metal folding handle that will fit most of the RADIOMASTER multi-protocol series of transmitters.

Complement your RADIOMASTER TX16S transmitter with these very smart and comfortable leather side grips. These grips are made of brown leather,  other colors are available.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

Aluminum alloy neck strap adjuster suitable for DJI transmitters or similar.

Futaba Trainer Cable (Buddy Box Cable) 2.8m

This set can be used with your own compatible transmitter as a replacement for a lost or damaged USB simulator cable. Includes adapters for Esky, JR/Spektrum and Futaba.

Compatible with XTR, AeroFly and FMS
Includes driver software.

The FrSky S.BUS to PWM Decoder allows you to use any standard analog or digital servos with your S.BUS compatible receiver. This eliminates the need for using pricey S.BUS specific servos allowing you to use your models existing servos.

Featuring 4 programmable channel outputs, you can independently assign each servo to a channel of your choice while only having to connect one input lead from your receiver. This makes your wiring much more tidy and allows for easy setting up of your servos without the need for running multiple extension leads.

This is a great device to use in conjunction with our Orange 7CH and 9CH S.BUS compatible receivers!

Includes:
FrSky S.BUS to PWM Decoder

Specs:
Channel Outputs: 4 programmable
Channel Ouput Lead Lengths: 200mm
Overall Length: 350mm

*Note: FrSky Servo Channel Changer required (sold separately, see related items below) to change assignment of channel outputs.

The FrSKY S.Port to UART Converter supports a link with external analog devices via two ADC ports for Serial port Data-Transmission at S.Port BUS and analog signal AD input via S.Port.

The pack contains module A and B along with 2 x male to male jumper cables.

Specs:
Mode: SP2UART
Operating Voltage: DC 4 -10 V
Weight: 3g
Size: 44 x 15 X 7mm
Current Draw: 20mA @5V
Operating Temperature Range: -40 ~ 85 Degrees C

The perfect transport/storage option for your precious R/C transmitter!

The Turnigy Transmitter Bag features lightweight construction, yet is rigid enough to protect your radio during normal transport. It has dual zippers, a removable carrying strap and pockets inside to accommdate a wide variety of accessories such as spare TX battery, charger, neck strap and more!

Two self adhesive foam blocks are included on the inside for accommdating your specific transmitter shape. They feature a hook & loop backing so they can be moved to whichever position you need very quickly and easily. There is even a hook & loop strap integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g

This is the perfect protection for the transport and storage of your precious R/C transmitter.  It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Grey/Orange

This is the perfect protection for the transport and storage of your precious R/C transmitter. It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Red/Grey

This is the perfect protection for the transport and storage of your precious R/C transmitter. It features lightweight construction, yet is rigid enough to protect your transmitter during transportation. It has dual zippers, a removable carrying strap, and pockets inside to accommodate a wide variety of accessories such as a spare TX battery, charger, neck strap, and much more!

Two self-adhesive foam blocks are included for the inside so you can adjust these as necessary to accommodate your specific transmitter. Also, these include hook & loop backing so they can be moved to whichever position you require very quickly and easily. A hook & loop strap is integrated into the bag to ensure your transmitter stays put.

Specs:
Inner Dimensions: 290x190x100mm
Weight: 450g
Color: Black/Orange

The FrSky FLVS ADV sensor is designed to measure the battery voltage of 2S~8S Li-Po batteries at 0.01V voltage resolution. The data can be transmitted via the F.Port or Smart Port (S.Port) of telemetry-enabled receivers such as the FrSky X8R, X6R, X4R, etc to compatible transmitters, such as the Taranis or other OpenTx radios. This is an obvious choice for accurate measurement of large-capacity Li-Po batteries.

FrSky has enhanced the performance and capability of its original sensors, resulting in the development of the new ADVANCE (ADV) series. All ADV sensors fully support the FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with an FBUS-capable receiver which further simplifies model builds.

The FrSky High Precision Vario Sensor monitors atmospheric pressure and reports altitude and changes in pressure, this will indicate where the lift is which is invaluable if you want to find thermals with your RC glider.

The advanced high-precision variometer sensor calculates the altitude from atmospheric pressure, the atmospheric pressure drops as you rise in altitude. Using this change in pressure the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. This unit has been designed to be used in conjunction with FrSky telemetry-enabled transmitter and receiver system.

This advanced telemetry sensor incorporates a GPS module to provide useful variable directional information such as position, speed, distance, altitude, and UTC time. It can then be displayed in real-time on FrSky's Taranis transmitters, this can also be logged onto the radio's SD card. This location data is particularly useful for "lost aircraft situations" providing you with the coordinates of your lost model if it's still in radio range or its last known position if not.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function in the ETHOS system. This ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. This sensor will only work with the FrSky F.Port and Smart Port-enabled receivers. It does not provide autonomous GPS navigation or an RTH mode for your model; it is purely to provide data to your radio.

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Laying down your radio is never an ideal situation and some transmitter stands just dont suit especially where a transmitter module has been fitted to the back, so why not use our latest single peg design.

Easily mounted on the carry handle, the stand will do its job quickly and easily and then fold away against the back of your transmitter. 

Made from machined alloy, this is a quality product and comes in a red anodised finish.

Weight: 27g

Laying down your radio is never an ideal situation and some transmitter stands just dont suit especially where a transmitter module has been fitted to the back, so why not use our latest single peg design.

Easily mounted on the carry handle, the stand will do its job quickly and easily and then fold away against the back of your transmitter. 

Made from machined alloy, this is a quality product and comes in a silver anodised finish.

Weight: 27g

The OrangeRx SF7003XS has all the properties and features of the original FASST compatible receivers in the OrangeRx brand but this one now operates on the later Futaba FHSS (Frequency Hopping Spread Spectrum) system. This receiver also has S-Bus and a built in 3 axis stabilizer which is brilliant in model airplanes to help beginners master the art of RC flying and for experienced pilots to make their flying even smoother. This receiver is perfect for the large gliders with long wingspans, it really helps to smooth out the turns and nose attitude when thermalling at higher altitudes.

The stabilizer function has 5 modes, mixer off, dual ailerons, V-tail mixing, delta mix and dual aileron/V-tail mixer. There are independent, simple to use gyro gain adjustments for the aileron, elevator and rudder functions, the stabilizer function can also be switched on and off in flight via CH5. The S.Bus functionality is perfect for large models and gliders that utilize a lot of servos, especially in the wings, it reduces the amount of wiring and keeps things nice and tidy.

The receiver will also accept a wide range of input voltages from 3.6~8.5V which is great if you want to use LV and HV type servos.

Compatible with the following Futaba FHSS 2.4Ghz air systems: 4YF, 6J, 8J and 10J, can also be used with the T14SG under S-FHSS protocol mode

Features:
• Lightweight (16g)
• Compatible with FHSS 2.4Ghz air systems
• 7 channels
• Built in 3 axis stabilizer
• 5 stabilizer modes
• Supports SBus
• Compact design (54 x 32 x 13mm)
• Failsafe and battery failsafe
• Extremely low latency
• Fast frame rates
• Hops from frequency to frequency in a pseudorandom sequence
• Advanced algorithms create a secure frequency

Specs:
Type: SF7003XS
Input Voltage: 3.6~8.5V
Operating Current: 60mA max
Battery Failsafe Voltage: 3.8V
Latency: 6.8mS
Sensitivity: About -96dBm
Dimensions: 54 x 32 x 13mm
Weight: 16g

Included:
OrangeRx SF7003XS receiver
Plastic screwdriver for making adjustments
Instruction manual

Note:
All OrangeRx receivers come with a 12 month warranty. This is not a Futaba receiver, nor is it a copy of a Futaba receiver. Futaba, FASST and FHSS are trademarks of Futaba Co (JP).

This small lightweight 4ch switch is extremely handy for auxillary functions on all sorts of models. Plug the single lead into an auxillary switched function then switch your radio on, channel 1 on the electronic switch will then be active, cycle the auxillary switch once and channel 1 goes out and channel 2 comes on, cycle the switch once more and 2 goes out and channel 3 comes and so on until it comes back to channel 1. When the radio is switched off and then switched back on the unit will default to channel 1 each time. This unit is great for switching lights on and off and other low current applications.

Please note: For this switch to work correctly you will need to set the related channel travel to +- 100%.

Specs:
Input Voltage: 4.8~7.4v
Output Voltage: 4.8~7.4v
Maximum Current: 2amps
Length: 40mm
Width: 20mm
Height: 12mm
Weight: 7g
Input Cable: 21cm (JR type plug)

Specs:
Maximum throughput : 10A / 30v
Weight: 7g

Especially made for FlySky FS-i10 and our Turnigy i10, this sun shade will enhance visibility of your LCD touch screen.

Simply peel and stick and fit directly around the screen area.  The shade collapses easily for storage/transport.