Power Systems

Building on the Turnigy iA6B, HobbyKing are now providing the 10 channel Turnigy TGY-iA10B. This receiver is capable of iBUS, SBUS, PPM and PWM for enhanced control. These are an excellent addition to your Turnigy TGY-i6s and TGY-i10 transmitters.

This full 10 channel receiver works for most models and is considered a "full range" so it can handle larger models as well as the smaller ones. Dual antennas give the TGY-iA10B for unparalleled reception. 

Built in connections allow you to use our optional telemetry sensors.

Easy binding, light weight, optional telemetry, dual antennas, what else could you ask for.

Features:
• Reliable, interference free 2.4GHz AFHDS 2A signal operation
• Ultra light weight design
• Dual antennas for most reliable interference-free operation
• Connection ports for use with optional telemetry sensors

Specs:
Channel: 10
Frequency: 2.4GHz ISM Frequency Range
Output data: PPM, i.BUS, S.BUS, PWM
RF Power: < 20dBM
Power: 4.0V~6.5V
Working Current: 82mA
Dimensions: 51x35x16mm
Net Weight: 20g
Range: > 500 meters

This enhanced V2 version of the Turnigy-iA6B receiver is a perfect match for the Turnigy TGY-i6s transmitter. Now capable of iBUS, SBUS, PPM and PWM for enhanced control.

This compact 6 channel receiver is great for any model using up to 6 channels and, with a range exceeding 500 meters, it can be considered to be full range for all but the most demanding of applications.

The receiver has end-on connectors to enable a neat installation in tight spaces. Built in connectors allow you to use any of the optional Turnigy telemetry sensors.

Dual antennas give the iA6B excellent reception and interference rejection capability.

With easy binding, compact dimensions, optional telemetry and dual antennas, it's difficult to imagine what else we could have added!

Features:
• Reliable, interference free 2.4GHz AFHDS 2A signal operation
• iBUS, SBUS, PPM and PWM
• Compact, lightweight design
• Dual antennas for reliable, interference-free operation
• Connection ports for use with optional telemetry sensors

Specs:
Channels: 6
Frequency: 2.4GHz ISM Frequency Range
Receive sensitivity: -105DBm
Frequency range: 2.4055-2.475 GHz
Band width: 500kHz
Band quantity: 140
Antenna: C130-RF-014
Transmitting power: <20dBm
Code type: GFSK
System: AFHDS2A
Sensitivity: 1024
Power: 4.0~6.5V DC
Distance: >500m
Function: Two-way communication, Multifunction extension
Output data: PPM, i.BUS, S.BUS, PWM
Data acquisition: yes (FUTABA)
PPM output: yes (CH1)
Channel data: Center position: 1500±10us, range: 1000~2000±10us
Wireless update: Yes
Color: Black
Certification: CE, FCC, RCM

The Turnigy TGY-iA6C is a new style in receivers. It builds on the reliability of the TGY-iA6B receiver but it is built specifically for using with PPM, i.BUS and S.BUS configurations. This is an excellent addition to your Turnigy TGY-i6s and TGY-i10 transmitters.

Dual antennas give the iA6C for unparalleled reception. Built-in connections allow you to use our optional telemetry sensors. 

An excellent receiver for multi-rotor drones as it cuts down on cabling and with built-in battery monitoring.

Features:
• Reliable, interference free 2.4GHz AFHDS 2A signal operation
• PPM, i.BUS, S.BUS
• Ultra-light weight design
• Dual antennas for most reliable interference free operation
• Connection ports for use with optional telemetry sensors
• Battery monitoring

Specs:
Channel: 8
Frequency: 2.4GHz ISM Frequency Range
Band width: 500KHz
Band quantity: 135
RF Power: <20dBM
System: AFHDS2A
Code type: GFSK
Output data: PPM, i.BUS, S.BUS
Antenna length: 26mm
Power: 4.0V~6.5V
Wireless Update: Yes
Channel data: Center position: 1500±30us; range: 1000~2000±30us
Channel delay: <15ms
Net Weight: 7.9g
Dimensions: 41x25x10mm
Range: >300 meters
Certification: CE0678, FCC ID: N4ZIA6C00, RCM

The FrSky Taranis Q X7S is the next step on from the original Taranis Q X7 and comes in a stunning blue case. It also keeps all the cool features of the Taranis Q X7 but adds even more stunning features. It still has all the usual Taranis features in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.

FrSky TFR6 7ch 2.4Ghz Receiver FASST Compatible

Compatibility:
FASST 2.4G: Air Systems (7CH Mode/Multi Mode)
FrSky TF Modules: TF-8M, TF-14M


Features:
Light weight and small size
Two selectable failsafe setting options


Specifications:
Number of Channels: 7
Operating Voltage Range: 3.5V~10V
Operating Temperature Range: -10C~60C
Dimension: 37*22*8mm
Weight: 7.8g

The Turnigy Voltage Protector helps prevent your receiver from dropping below its required operating voltage. This helps to eliminate "brownouts" and prevents your receiver from rebooting. It will also help reduce the load on your ESC's BEC and reduce the likelihood of glitching. Simply plug it into any spare channel on your receiver.

Operating Voltage : 3.2V - 11.1V (1s ~ 3s LiPo)
Capacitor voltage: 16v
Storage Capacity: 3300uf
Weight: 6.1g

The FrSky S.BUS to PWM Decoder allows you to use any standard analog or digital servos with your S.BUS compatible receiver. This eliminates the need for using pricey S.BUS specific servos allowing you to use your models existing servos.

Featuring 4 programmable channel outputs, you can independently assign each servo to a channel of your choice while only having to connect one input lead from your receiver. This makes your wiring much more tidy and allows for easy setting up of your servos without the need for running multiple extension leads.

This is a great device to use in conjunction with our Orange 7CH and 9CH S.BUS compatible receivers!

Includes:
FrSky S.BUS to PWM Decoder

Specs:
Channel Outputs: 4 programmable
Channel Ouput Lead Lengths: 200mm
Overall Length: 350mm

*Note: FrSky Servo Channel Changer required (sold separately, see related items below) to change assignment of channel outputs.

Compatible with Futuba Fasst transmitters the Corona R14FA offers an affordable alternative for Futaba radio users.

Specs:
Operating Current:
70mA @ FASST 7ch mode normal and 110 mA max,
80mA @ FASST multi-channel mode normal and 110 mA max
Operating Voltage:  4.0 ~10V
Latency:
7mS for high speed PPM (HS), 14mS for low speed PPM (LS) @ FASST multi-channel mode,
8ms for high speed PPM (HS), 16mS for low speed PPM (LS) @ FASST 7ch mode
Sensitivity: ~ -96dBm
Fail Safe: Yes
Size: 53x37x16mm
Weight: 22g
Antenna length: 136mm

Compatibility:
FUTABA FASST 2.4GHz transmitters
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Mount this handy device somewhere on your model where it can be seen clearly and plug it into a spare channel on your receiver, if no channel is available then use a Y lead. This unit will give you a visual check of your LiPoly or LiFe receiver battery each time you switch on. The easy to read series of LED's will show you whether it is safe to carry on or if the battery requires charging.

Specs:
Voltage Range: 6.6~7.4V
Dimensions: 40x21x2.5mm
Weight: 4g
Lead Length: 320mm
Plug: JR type

The RMILEC Adapter Converter Board is the perfect solution to allow easy connection to an SBUS receiver. The T4363NB18 adapter supports 5V power supply and can be used not only for matching 12FG or 14MZ transmitters but can also be individually placed in another location as a relay station.

The board is supplied complete with hardware including, JST battery connectors, on/off switch, terminals, fixtures and fittings.

Please note: soldering of on/off switch and terminals is required.

Specs:
Material: PCB
Weight: 39.65g
Dimensions: 90 x 115mm

The Turnigy TGY-i6 is a great entry-level 6-channel telemetry 2.4ghz computer transmitter that uses solid and reliable Automatic Frequency Hopping Digital System (AFHDS) spread spectrum technology. The Turnigy TGY-i6 has both a nice quality look and feel, while the programming is simple to use. The TGY-i6 also has an impressive list of features and includes a TGY-iA6 6-channel receiver. Suitable for both model helicopters and airplanes, the Turnigy TGY-i6 is a superb budget computer radio for both new and experienced pilots!

Turnigy 9X 2.4GHz 8ch (V2) receiver that is suitable for use with the Turnigy 9X transmitter (V2). Get that locked-in feeling that only the 2.4Ghz glitch-free technology can provide. Ultra-fast reaction times and interference-free control of your model that is only achievable with this latest 2.4Ghz technology.

HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.

Specs:
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g

Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the satellite receivers and it has an exit hole on the rear for the antenna and a cut-out on the side for the satellite receiver plug.

Specs:
Length: 47.5mm
Width: 25mm
Height: 16mm
Weight: 8g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R615
Material: Silicone rubber
Color: Black
Dimensions: 46 x 22 x 15mm
Weight: 3.5g

Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop
securing straps, additional slots are provided for the twin antenna.

Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 43 x 25 x 16mm
Weight: 5g

Spare Part - Premium BNC 1.3m RG223 cable for Scherrer Rx700LR Long Range UHF system

Spare Part - RC Adapter Graupner/JR for Scherrer Rx700LR Long Range UHF System

Spare Part - RC Adapter Multiplex for Scherrer Rx700LR Long Range UHF System

Spare Part - RC Adapter Naked (you put your own adapter on) for Scherrer Rx700LR Long Range UHF System

Spare Part - RC adapter plug for Futaba for Scherrer LR UHF System

Spare Part - RC adapter plug for MPX for Scherrer LR UHF System

Rx700NR is a small and very light weight receiver with 9 channels that has a range of up to 20km! It also has an optimized input filter which will prevent interference from strong 2.4 GHz video systems.

The Rx700NR will work with any Scherrer long range transmitter and will provide you with a solid and safe signal for your flights. The antenna is mounted directly on the board and with a total weight of only 8 grams this receiver is perfect for UAVs where the focus is on weight and longer flight times.

Features:
• Up to 20km range
• External firmware upgrade port
• Running LED
• Completely new software
• Selectable PPM/PWM
• Sequential failsafe

Specs:
Board Dimensions: 26 x 53mm
Weight: 8g
Number of channels: 9
Output: PPM output 
Rssi output: 0.5 to 3.3V from min to mix
Supply voltage: 4 -10 V
Supply current RX: 18mA at 5V
System: Wideband frequency hopping 
Band: 433 and 440 MHz 
User firmware upgradeable: Yes
Wide user temperature range: -40C to +70C ambient

The OrangeRx SF7003XS has all the properties and features of the original FASST compatible receivers in the OrangeRx brand but this one now operates on the later Futaba FHSS (Frequency Hopping Spread Spectrum) system. This receiver also has S-Bus and a built in 3 axis stabilizer which is brilliant in model airplanes to help beginners master the art of RC flying and for experienced pilots to make their flying even smoother. This receiver is perfect for the large gliders with long wingspans, it really helps to smooth out the turns and nose attitude when thermalling at higher altitudes.

The stabilizer function has 5 modes, mixer off, dual ailerons, V-tail mixing, delta mix and dual aileron/V-tail mixer. There are independent, simple to use gyro gain adjustments for the aileron, elevator and rudder functions, the stabilizer function can also be switched on and off in flight via CH5. The S.Bus functionality is perfect for large models and gliders that utilize a lot of servos, especially in the wings, it reduces the amount of wiring and keeps things nice and tidy.

The receiver will also accept a wide range of input voltages from 3.6~8.5V which is great if you want to use LV and HV type servos.

Compatible with the following Futaba FHSS 2.4Ghz air systems: 4YF, 6J, 8J and 10J, can also be used with the T14SG under S-FHSS protocol mode

Features:
• Lightweight (16g)
• Compatible with FHSS 2.4Ghz air systems
• 7 channels
• Built in 3 axis stabilizer
• 5 stabilizer modes
• Supports SBus
• Compact design (54 x 32 x 13mm)
• Failsafe and battery failsafe
• Extremely low latency
• Fast frame rates
• Hops from frequency to frequency in a pseudorandom sequence
• Advanced algorithms create a secure frequency

Specs:
Type: SF7003XS
Input Voltage: 3.6~8.5V
Operating Current: 60mA max
Battery Failsafe Voltage: 3.8V
Latency: 6.8mS
Sensitivity: About -96dBm
Dimensions: 54 x 32 x 13mm
Weight: 16g

Included:
OrangeRx SF7003XS receiver
Plastic screwdriver for making adjustments
Instruction manual

Note:
All OrangeRx receivers come with a 12 month warranty. This is not a Futaba receiver, nor is it a copy of a Futaba receiver. Futaba, FASST and FHSS are trademarks of Futaba Co (JP).