Power Systems
-
Servo Extension Lead 42cm (5pcs/bag)$3.23Strong, well crimped and finished.
Learn More
High quality wire and terminals used. -
RC Controller Stick Ends. (JR)$5.99RC Controller Stick Ends. (JR) Add some bling style to your transmitter stick!Learn More -
CNC Rudder 2 Tray 4.0 inch (#4-40) Black$19.99CNC Rudder 2 Tray 4.0 inch (#4-40) Black
Shoring : 2 Bearing Insert
Servo: HITEC, FUTABA, JR
Weight: 85gCOLOR
Shoring, Arm: Titanium Silver
Tray: The resulting black anodized finish rework is a classy two-tone imageThis is a CNC machined Rudder 2_Tray that features a 4.0" Servo Arm with multiple 4-40 bolt output mounting holes.
This tray features dual ball bearings for ultra-smooth and precise movement.
Learn More -
Turnigy 9X 2.4GHz 8Ch Receiver (V2)$12.86Turnigy 9X 2.4GHz 8ch (V2) receiver that is suitable for use with the Turnigy 9X transmitter (V2). Get that locked-in feeling that only the 2.4Ghz glitch-free technology can provide. Ultra-fast reaction times and interference-free control of your model that is only achievable with this latest 2.4Ghz technology.
Learn More -
Blue Bird BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.3g$16.82BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.4gContinuing the Blue Bird tradition of affordable performance. By using carbon+30% POM gears and optimizing the curvature of the gears, the gears are able to withstand over 3.5kg of force. With a tolerance of less than 0.3 degree per PWM step, this servo is perfect for CCPM helicopter control, precision aerobatic aircraft, and 1/18 scale cars.
The motor is wound with 2PEW thin coated wire for better electrical conductivity and is able to withstand over high temperature without degradation.
The servo comes with an accessory package and the universal JR/Hitec "S" Connector which is physically and electrically compatible with all major receiver brands sold worldwide. Follow the wiring diagram below. 1. Carbon+30% POM gear with smooth curvature
2. M9.6 ball bearing (si-oil)
3. High-torque motor with low RF noise (CE certified)
4. Rubber seals for waterproof case
5. Designed to be used in R/C helicopter applications.
6. Futaba compatible 25 tooth output splines
7. Metal gears of aluminum 6061 material combined with light and strong C95 material
8. 2PEW coated motor wire for high-temperature us
Learn More
Weight: 11.4 grams / 0.44oz
Dimensions: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 inch
Torque At 4.8V: 1.6kg/cm , 22 oz/in
Torque At 6.0V: 2.3kg/cm , 28 oz/in
Speed At 4.8V: 0.13sec / 60 deg at no load
Speed At 6.0V: 0.11sec / 60 deg at no load -
Corona DS-929MG Digital Servo 2.2kg / 0.11sec / 12.5g$8.97Corona DS-929MG is a fantastic small powerful servo. Extremely popular with good speed and metal gear. A cost effective digital servo for small RC planes, cars and boats or updating plastic gear servos with metal gear ones. Precise control and minimal dead-band width, they are an excellent choice and recommended by our own electrical engineer, Nick.
Learn More -
Corona 2.4Ghz 8ch Receiver (V2 DSSS)$20.56Corona 8 Channel 2.4Ghz DSSS Receiver.
Can only be used with Version II Futaba & JR Corona modules.
Spec.Size : 46mm*25mm*16mmLearn More
Voltage : 4.8 V - 6V
range : more than 2100m
Operating current : 30 MA
Sensitivity : -100dbm
Latency : 22ms
-
Corona DS-919MG Digital Metal Gear Servo 1.7kg / 0.06sec / 12g$9.09Corona 919MG Metal Gear Servo 1.7kg/ 0.06sec / 12.5g
Learn More -
Corona DS-939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5g$9.58Corona 939MG Digital Metal Gear Servo 2.7kg / 0.13sec / 12.5gModel: DS939MGLearn More
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 240mA
Operating Speed: 0.14sec.60º/ 0.13sec.60º
Stall Torque: 2.5kg.cm / 2.7kg.cm
Size: 22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight: 12.5g
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR85
Gear: Metal
Connector wire: 215mm
Operating Temperature Range: -20J+60J -
Power HD 1900A Servo 20T 1.7kg / 0.08sec / 9.9g$4.62Micro analog servo.
Learn More
Precise, jitter free response for small parkflyers or light 3D. -
Electric Retract with Reversible Mount (1pc) 18.8g$9.01The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servoless mechanism with metal gearing and a high torque motor ensures trouble free flying! This unit comes with 2 mount plates meaning it can be mounted normally or reverse with the extra plate being used for a top wing re-enforcing plate if required.Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!
Spec.
Working voltage: 4.8~6V
Speed: 0.55s/60deg 4.8v - 0.45s/60deg 6v
Travel: 90 degree
Dimensions: 54.8x32x21mm
Weight: 18.8g
Shaft size: 3mmMount Dimensions:
Mounting Plate Dimensions: 32mmx25mm
Hole Spacing: 17mmx25mmNot suitable for a plane heavier than 2kg
Learn More
Strut & Landing gear not included -
HK-5320 Ultra-Micro Digital Servo 0.075kg / 0.05sec / 1.7g$4.00HK-5320 Ultra-Micro Digital Servo
Spec.
Weight: 1.7g
Speed: 0.07sec 60deg @ 2.8v / 0.05sec 60deg @4.2v
Torque: 0.05kg @ 2.8v / 0.075kg @ 4.2v
Dead Band: <4usPlug: Micro JST - 1.25 PitchLearn More -
HobbyKing® ™ GT-2 2.4Ghz Receiver 3Ch$7.60HobbyKing® ™ GT-2 2.4Ghz Receiver 3Ch.Please note: This receiver is compatible with the GT2E radio, the radio however will need to be switched to AFHDS1 protocol mode, this is outlined in the radio's user manual.Specification:Model: Car/BoatChannels: 3chFrequency band: 2.4GhzModulation: GFSKSensitivity: 1024RF. receiver sensitivity: -100dbmFail Safe: YesPower: 4.5~6VDCWeight: 5gAntenna length: 26mmSize: 37.6 x 22.3 x 13mmCE & FCC certified
Learn More -
HobbyKing 2.4Ghz Mode 2 4Ch Tx & Rx V2$27.97HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)
HobbyKing's T4A 2.4ghz system is an entry-level transmitter offering the reliability of 2.4 GHz signal technology and a receiver.
The T4A makes a good backup transmitter or a take-anywhere unit. Drop it, scratch it, leave it in the car, and forget about it. This is what the T4A is all about.
Not suitable for the multi-flaperon, mixer, V-tail, FPV, robot-controlling hobbyist.Learn More -
HobbyKing 2.4Ghz Receiver 6Ch V2$12.95HobbyKing 2.4Ghz Receiver 6Ch Version 2Weight: 13g
Compatible only with HobbyKing T4A & T6A Version 2 transmittersLearn More -
HobbyKing™ HK15138 Standard Analog Servo 4.3kg / 0.17sec / 38g$3.96HK15138 Standard Analog Servo
Spec.
Torque: 3.8kg @ 4.8v, 4.3kg @ 6v
Weight: 38gSpeed: 0.21 / 60deg @4.8v, 0.17 / 60deg @ 6v
Voltage:4.8v~6v
Plug: JR StyleLearn More -
HobbyKing™ HK15178 Analog Servo 1.4kg / 0.10sec / 10g$2.35Don't let the price fool you. This is a decent analog servo and the colour is, well, different.
No longer will you goose step to the blue or black servo crowd, get a HobbyKing HK15178!Spec:
Torque: 1.2kg/cm @ 4.8v, 1.4kg/cm @ 6v
Weight: 10g
Speed: 0.10/60deg @ 4.8v, 0.09/60deg @ 6v
Voltage: 4.8v~6v
Plug: JR
Learn More -
HobbyKing™ 939MG Servo MG 2.5kg / 0.14sec / 12.5g$10.99HobbyKing 939MG Metal Gear Servo 2.5kg/ 0.14sec / 12.5g
A strong performer with a very smooth movement and good centering.
Excellent for parkflyers or planes up to .40 size (3,500mAh electric).
Learn More -
Digital Servoless Retractable System (1pc) 37g$8.83The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servo mechanism with metal gearing and a high torque motor ensures trouble free flying!
Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!Landing gear not included with the servoless retractable system.
Features:
Robust landing gear strut and mounting bracketBuilt-in 10 seconds over current and jamming protectionIntegrated electric motor with a micro PCBDouble shock absorption design, completely protect the gearsAuto 90 degree twist when retractedLearn More
Spec.
Working voltage: 4.5~5.5V
Speed: 0.7s/60deg 4.8v - 0.55/60deg 6v
Idle current: 3mA
Angle limit: 90 degree when retracted
Operating temp: -10~50C
Weight: 37g
Shaft size: 3mm
Mounting area size: 35mm x 33mm
Length: 67mm
Not suitable for a plane heavier than 2.5kg -
Digital Servoless Retractable system (1pc) 54g$9.35The easiest way to put retracts in your plane. No need to install a control box, messy wiring or a complicated air system. Just screw in the retracts, connect to your Rx and youre ready!
Reliable servo mechanism with metal gearing and a high torque motor ensures trouble free flying!
Why bother with air systems when you can now have a realistic and reliable electric unit at a fraction of the price?!Landing gear not included with the servoless retractable system.Learn More -
Turnigy™ TGY-D56MG Coreless DS/MG HV Servo 1.2kg / 0.10sec / 5.6g$8.14The Turnigy D56MG HV is great for small 3D planes and parkflyers where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price. The HV voltage lets you use a 2s Lipo or LiFE battery directly with no need for a BEC.
Learn More -
Turnigy™ TGY-D56LV Coreless Low Voltage DS/MG Servo 0.89kg / 0.10sec / 5.6g$7.45The Turnigy D56LV is great for small gliders and DLGs, or just about any other mini airplane using single cell LiPoly batteries (3.7V) and where the ruggedness of a metal gear train is required. The coreless motor provides excellent holding power and precision at a great price.
Learn More -
OrangeRx Silicone Protection Cover for Non Satellite Receivers$2.07Protect your OrangeRx receiver from damage and vibration with this protective silicone shell.Fits snuggly around most of the non satellite receivers and it has exit holes on the rear and side for the antennas.
Specs:
Learn More
Length: 44.5mm
Width: 25mm
Height: 16mm
Weight: 6g -
Orange RX Silicone Rubber Shell for R620 Series Receivers$1.64Protect your Orange receivers from fuel or crash damage with the Orange RX Silicone Rubber
Learn More
Shell. The shell provides added protection for the heart of your RC model whilst also providing
additional securing options. The rear of the shell has a slot to allow the use of hook and loop securing straps, additional slots are provided for the antenna and satellite port of your receiver.
Specs:
Suitable Receiver: Orange R620
Material: Silicone rubber
Color: Black
Dimensions: 46 x 25 x 17mm
Weight: 4.4g
![]("http:/www.mks-servo.com.tw/images/speed-reaction.jpg"){kind=link}
Login and Registration Form