Power Systems

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (2S):
5.25x5.5: 48W, 6.7A, 323g static thrust
5.5x6.5: 62W, 8.5A, 412g static thrust
6x6: 74W, 10A, 466g static thrust

Performance Data (3S):
4.1x4.1: 58W, 5A, 284g static thrust
4.5x4.1: 74W, 7A, 363g static thrust
5x4.1: 100W, 9.5A, 472g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (2S):
11x7: 152W, 21A, 923g static thrust
11x8.5: 168W, 24A, 1032g static thrust
12x8: 194W, 27A, 1101g static thrust

Performance Data (3S):
9x4.5: 200W, 19A, 957g static thrust
9x7.5: 276W, 26A, 1366g static thrust
10x6: 310W, 29A, 1393g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

Performance Data (3S):
8x6: 329W, 31A, 1481g static thrust
9x4.5: 375W, 35A, 1524g static thrust
9x5: 403W, 38A, 1653g static thrust

Performance Data (4S):
7x5: 415W, 29A, 1559g static thrust
7x6: 475W, 34A, 1819g static thrust
8x4.5: 567W, 40A, 1946g static thrust

Turnigy SK3 brushless motors are yet another step forward in motor evolution.

Once again we instructed our engineers to develop a motor that would not only rival but surpass the quality of the leading motors on the market today using the best quality magnets, bearings, and materials available.

The result is an outstanding series of motors that are efficient, strong, and robust enough for the most discerning modeler.

All of the SK3 series use quality double-shielded bearings, sintered neodymium magnets (the strongest type of permanent magnet commercially available), and a string wound stator to ensure accurate and consistent winding each and every time.

The Turnigy SK3 motors are suited to modelers who are seeking a top-quality brushless motor without compromise.

Performance Data (3S):
9x4.5: 254W, 24A, 1162g static thrust
9x6: 310W, 30A, 1459g static thrust
10x6: 406W, 39A, 1790g static thrust

Performance Data (4S):
7x6: 318W, 23A, 1371g static thrust
8x4.7: 392W, 28A, 1529g static thrust
9x4.5: 526W, 38A, 1904g static thrust

The FLYSKY Paladin PL18 Remote Control Radio is designed for precision flying. It was engineered to be intuitive with a powerful touchscreen setup. The Paladin comes with 18 channels and AFHDS 3 protocol. There are six model types to choose from Airplane, Helicopter, Glider, Delta Wing, Multicopter, and Engineering Vehicles making for a truly versatile radio, the package also includes an FTr10 receiver.

The FLYSKY Paladin PL18 Remote Control Radio is designed for precision flying. It was engineered to be intuitive with a powerful touch screen setup. The Paladin comes with 18 channels and AFHDS 3 protocol. There are six model types to choose from Airplane, Helicopter, Glider, Delta Wing, Multicopter, and Engineering Vehicles making for a truly versatile Radio. The package also comes with two receivers, the FTr10 and FTr16s.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

An excellent open carbon brush gear 540 35T motor that has been designed for, and is perfect for RC crawlers. Having the brush gear open means that maintenance, cleaning, and brush changing is a very simple task. The low 1320KV means masses of low down torque which makes it ideal for climbing steep and rough terrain at controllable low speeds.

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

Performance Data (5S):
15x6: 796W, 45A, 3338g static thrust
15x8: 970W, 56A, 4151g static thrust
16x7: 1053W, 60A, 4259g static thrust

Performance Data (6S):
13x6.5: 896W, 42A, 3567g static thrust
13x8: 1042W, 50A, 4214g static thrust
14x7: 1170W, 56A, 4439g static thrust

DYS D2225/13 2000KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 2000kv
Max current: 11A
Max power: 122W
Internal resistance: 0.143 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x4/6x5

DYS D2225/19 1350KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1350kv
Max current: 8.2A
Max power: 105W
Internal resistance: 0.203 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x5/7x3

The Turnigy AquaStar Sensorless Brushless Motors offer outstanding performance for your boat at an incredible price!

Featuring a quality CNC machined billet T6 aluminum motor can, hand-wound high purity copper windings and powerful sintered neodymium magnet, you wont find a better priced motor of this caliber anywhere else!  It even features a billet aluminum water cooling jacket pre-installed.

The AquaStar brushless motors are a great choice for your deep-V, hydro or catamaran race boat and will be sure to leave the competition in your wake!

Features:              
• CNC machined billet T6 aluminum motor can 
• High purity copper windings
• 4mm bullet connectors pre-installed   
• Powerful sintered neodymium magnet   
• Precision engineered for maximum energy conversion
• Water cooling jacket pre-installed

Specs:
RPM/v: 1700kv
Poles: 4
Max voltage: 22.2v (6S)
Max Current: 84A
Max Watts: 1800w
Resistance: 0.0094ohm
No Load Current: 2.9A
Can Diameter: 36mm (actual motor diameter)
Can Diameter inc. Water Jacket: 44mm
Can Length: 60mm
Shaft Size: 5mm
Weight: 270g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3650
Number of pole: 4
Motor KV: 5400
Max Current: 135A
Max Voltage: 12.6V / 3S Lipoly
Case Length: 50mm
Case Dia: 36mm
Shaft Dia: 3.175mm
Total Length: 67mm
Weight: 200g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Specs:
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Weight: 275g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-2200KV
Poles: 4
KV: 2200
Max Current: 70A
Max Voltage: 25.2V/6S Lipo
Max Watts: 1750w
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK3674-1900KV
Poles: 4
KV: 1900
Max Current: 61A
Max Voltage: 29.4V/7S Lipo
Case Length: 74mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 91.2mm
Weight: 310g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.

Spec.:
Size: XK2845-3650KV
Poles: 4
KV: 3650
Max Current: 48A
Max Voltage: 16.8V/4S Lipo
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Specs:
Size: XK2845-1980KV
Poles: 4
KV: 1980
Max Power: 220W
Max Current: 24A
Max Voltage: 33V (2-4S LiPo)
Case Length: 46.5mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 60.5mm
Weight: 125g

Features:
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Spec.:
Size: XK2858-2900KV
Poles: 4
KV: 2900
Max Power: 1300W
Max Current: 58A
Max Voltage: 23V (6S LiPo)
Case Length: 58mm
Case Dia: 28mm
Shaft Dia: 3.175mm
Total Length: 70mm
Weight: 160g

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance. 

TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.

A replacement Motor Aerodrive SK3 F5055-500KV with X mount for the Avios Grand Tundra 2 1700mm